It was a slightly milder-than-usual (compared to recent times) night of spraying last night. Intensity ranged from 7.5 to 7.75-. The typical type profile was in the air: Model Cement with Inflammatory and Mercury additives. The Inflammatory additive being dominant with the Mercury additive close behind.
9:53 pm
We had no discrete plumes this morning until just after 9 am when we were hit with the typical - and expected - wide-spectrum plume of type Model Cement, Chalky-Bitter-Pharma, and Burnt Electronics/Fungal with Inflammatory and Mercury additives. As is the case every morning for months now, this is a slow-rising plume. Intensity is now 8- and still rising slowly.
I cannot remember a time, for months now, that we have had 2 sunny days in a row. It has been overcast nearly 6.5 of 7 days here for months. But something has suddenly changed.
Today is the third day in a row that has been sunny... unheard of in recent history.
But what else changed? The spraying pattern.
If you have been watching this log, you will know that, for months, we have been getting hard all through the night with plumes every 60 to 120 minutes, but in the past few days, this has changed completely. We are now having comparatively mild spraying through the night for the past 3 days.
You are living in historic times. You were born during this time for a reason.
What will you do with that reason today?
11:08 am
Air toxicity is still increasing slowly and is now at 8.5- with the same mix.
On a side note...
Consider this. They - the globalists - are literally poisoning the population and the world, just like Rev 18:23 said they would.
One of the components they are using is mercury. Isn't it interesting that in the Vodun and Santeria religions they use mercury to induce "spiritual enlightenment" to allow the spirits to come in? Much like the globs new age religion for the masses, the new age movement encourages people to seek spirit guides, which is forbidden by God.
These "guides" are the same entities that Helena Blavatsky channeled to write her codification of the Luciferian religion. Why? Because these "spirit guides" are actually demonic entities posing as beneficent helpers.
In short, they are spraying us all with the same substance that some religions use to become spiritually oppressed/possessed. Mercury weakens your will and induces fear opening the door that you do not want to be opened.
At 12:35 pm we were hit with a plume of type Model Cement, Chalky-Bitter-Pharma, and Burnt Electronics/Fungal with Inflammatory and Mercury additives. Intensity is rising at a medium-slow rate and is now 8+. So far, not as bad of a day as the usual nightmare.
However... I looked out the kitchen window at 12 noon on the dot. This was the first glance that I took outside today, plus, this window can only view a small slice of the sky. What did I see? A medium-length, non-persistent chemtrail being laid down. I say this for 1 reason. There are so many jets in the sky that nearly every time (9 out of 10 times) I go outside, there is a jet in the sky, and I live in a place where there should be very few jets in the sky. I have checked and nearly all of these jets are military.
Also, at 12 noon there was 1 huge plume right over the house, as is so common and has been for years.
I looked out the same window at 12:22 and guess what. I saw 3 (three) jets leaving similar trails all heading east, just like the jet at 12 noon. These 3 jets were all flying in parallel about perhaps 1/2 mile from each other at a medium altitude. The center of the 2 jets was lagging about 40 seconds behind the others.
Again, all this is just to demonstrate how frequently they spray here. It's horrible. In fact, the sky was nearly clear at 12 noon. It's now 1 pm on the dot, and the sky is now 50% covered with fake clouds, and, just now, as I'm typing this, the air intensity just began rising rapidly.
In just the past 60 seconds of typing, air intensity has risen from 8 to 8.75. That is a very fast rise-time. This is likely the fallout from the jets that hit us at 12:20 pm because the descent time at medium altitude is 40 to 60 minutes in my experience. This is another wide-spectrum plume containing all of the components of the previous plume. The taste is horrible and my sinuses are burning. The aches and pains are all coming on strong, along with all of the other symptoms these intentional poisons produce.
So it continues. The attack on all life continues on our watch.
2:03 pm
In keeping with the recent patterns, they are keeping air toxicity intensity high. Since the previous post, air intensity has been between 8.25 and 9 and has not declined. It's currently at 9. The sky is nearly completely covered because of the onslaught we had early this afternoon.
The daily attack on all life continues on our watch.
The following images were taken looking out my kitchen window.
When I say they spray right over my house, I mean directly over my house.
4:01 pm
Until about 15 minutes ago, the air intensity has been oscillating between 8.5 and 9. About 15 minutes ago intensity decreased to 7.5+ where it remains now.
You saw the images of the spraying I posted above. The sky is now completely thick gray. No blue at all. They did this. They do this almost every day, but they usually start earlier in the morning so we don't get to see any sky. They were all military jets doing this.
Is it Jefferson who said that a standing military will eventually be used against it's own people?
One pilot has come forward and said that they are being told they are spraying to detect incoming missiles, but that is not the reason. Once you understand that Russia, China, and the U.S. are all controlled by the same globs, story that is being told to the pilots is nonsensical. The detection claim is a cover story to make the pilots think they are doing something good. They would never tell them the real reason this is being done.
The lies continue in the name of conquering the people. It's all about globs power.
By about 5:40 pm, intensity of the air began rising with a mix that contains Biologics.
If you have been watching this log, you know this: When they hit us with Biologics, they usually do it multiple days in a row.
Well, it happened yesterday and it's happening again today. This plume contains TYPE II Biologics. TYPE II designates that it causes flu-like symptoms if it remains in the air long enough to make people sick.
Intensity is rising at a slow rate and is only now reaching 7.75+.
I should mention that the TYPE II Biologics also can induce heart fibrillation in some people.
We'll see what happens next.
6:12 pm
The full profile of the current plume is now apparent. It is another wide-spectrum (it contains a lot of things) plume.
Type profile: Model Cement, Chalky-Bitter-Pharma, and Burnt Electronics/Fungal with Inflammatory and Mercury additives. The Burn Electronics/Fungal type is the dominant component at the moment.
8:15 pm
The previous plume peaked at 8+ and then subsided. The past hour air intensity has been about 7.75-.
At about 8:10 pm we were hit with a full-spectrum plume of type Model Cement, Chalky-Bitter-Pharma, and Burnt Electronics/Fungal with Inflammatory and Mercury additives. The Burn Electronics/Fungal type is the dominant component at the moment, but the Inflammatory additive is close behind and will probably overtake it soon. The Inflammatory additive is normally dominant at night, but for the past few weeks, it's been dominant all morning and all day, but that pattern has changed in the past 3 days. Patterns do change on a regular basis and usually continue for about 3 months, sometimes longer.
Current intensity is 8.25+ and rising at a medium rate.
The attack on all life continues. High bypass turbofan engines (a.k.a. "jet engines) do not produce trails naturally, using common jet fuel with no additional chemtrails pumped into them. This is the reason the fallout from chemtrails has such a strong odor and taste. It is not simply jet fuel (kerosene) they are burning. They are clearly, without a shadow of a doubt, pumping toxic substances into the engines that cause the huge plumes to form.
I have smelled and tasted the fallout from these toxic substances from day 1. You cannot smell or taste something that isn't there. And please understand. It's not just a small taste or subtle odor. It's absolutely overwhelming to the point of often being nauseating, not to mention the fact that most people, even if they don't smell or taste them, have tangible health symptoms (headaches, nausea, vertigo, weakness, tremors, digestive issues, etc. when they breath them.
The attack continues.
10:55 pm
From about 9 pm intensity dropped to 7.5 and stayed at that level until 10:40 pm.
At 10:40 pm intensity began rising at a medium-fast rate. The type profile includes Biologics: Model Cement, Chalky-Bitter-Pharma, and Burnt Electronics/Fungal with Biologics, Inflammatory and Mercury additives. Intensity is now 8.25+ and rising. The Biologic additive is currently the dominant component. They always spray Biologics on successive days.
The attack continues.
12:13 am (4/1)
The previous plume rose to intensity 8.5 and then subsided at the same rate.
Then we had a short break until the current plume hit us.
If you have been following this log, you know the current pattern is that they hit us at about 11 pm (roughly), then 12 midnight, and then again at about 1 am. So, the 10:40 pm hit must have been the 11 pm scheduled event.
At 11:58 pm we were hit with the next plume. Intensity rose quickly and hit 9+ just a minute ago. The type profile is the same wide-spectrum profile that the have been dropping on us all day. As is usually the case at night, the Inflammatory additive is dominant. This is perhaps the strongest plume all day.
And so, the attack on all life continues.
1:10 am (4/1)
Well, right about on time, if not a few minutes late.
Our 1 am hit just hit us.
At 1:07 pm we were hit. Type profile is the all-too-common wide-spectrum Model Cement, Chalky-Bitter-Pharma, and Burnt Electronics/Fungal with Inflammatory and Mercury additives. Intensity is now 8.5- and rising quickly. The Inflammatory additive is the dominant component.
The attack continues.
1:24 am (4/1)
The intensity of the previous plume is now 9.25+ and still rising.
March 30
Overnight
It was a slightly milder-than-usual (compared to recent times) night of spraying last night. Intensity ranged from 7.5- to 7.5+. The typical type profile was in the air: Model Cement with Inflammatory and Mercury additives. The Inflammatory being dominant with the Mercury close behind.
1:52 pm
Between 7:30 am and 10:30 am intensity rose slowly from 7.5 to 7.75+. The type profile was the same: Model Cement with Inflammatory and Mercury additives.
I was not able to record from 10:30 am to 11:45 am, so we may have had the typical 11 am hit, but I don't know.
At 11:55 am we were hit with the now-typical mix of Model Cement, Chalky-Bitter-Pharma, and Burnt Electronics/Fungal with Inflammatory and Mercury additives. Intensity rose at a medium rate peaking at 8.25 and then dissipating at the same rate.
At 1:44 pm we were hit with another wide-spectrum plume of type Model Cement, Chalky-Bitter-Pharma, and Burnt Electronics/Fungal with Inflammatory and Mercury additives. Intensity is rising at a medium-fast rate and is now 8.75- as I type this. Intensity is still rising. The Inflammatory component is dominant.
2:11 pm
The intensity of the previous plume is now 9.25 and rising.
4:18 pm
The intensity continues without breaks. They are laying so we have no lower intensity troughs between plumes. Intensity is oscillating between 8.25 and 8.75. They seem to be making this high intensity the "new normal" as the majority of the day is now spent at this intensity. This is not good at all. You will see (are already seeing actually) the acceleration of a wide variety of health issues amongst the population.
Remember, "layering" is the process of creating rapid (high-frequency) releases that don't allow the toxic air intensity to drop between plumes. This places a much higher burden on the body by removing the "recovery time" that would otherwise be there. Without this recovery time, the body will undoubtedly enter a disease state sooner. I consider intensity 7.5 or lower a "break" based on a number of criteria. An article may be forthcoming.
The current toxic air intensity is 8.5-
6:01 pm
We finally got a little bit of a "break" from the poisoning.
At about 4:50 pm intensity has finally dropped back to 7.5+, which is very close to - what I call - "a break". Intensity remained at this level until until a few minutes ago.
At about 5:55 pm we were hit with wide-spectrum plume of Model Cement, Chalky-Bitter-Pharma, and Burnt Electronics/Fungal with Inflammatory and Mercury additives. Intensity is rising at a medium-fast rate and is now already at 8.25+.
10:05 pm
It's been an eventful evening. We have been hit with Biologics and it's pretty strong as I type this. The intensity of the Biologics component rose slowly from about 8:30 pm until peaking at 9:50 pm. The peak intensity was 9, which is strong for Biologics. This plume also contained Model Cement with the Inflammatory and Mercury additives. The Biologic component is dominant.
Going back a little, from about 7:30 pm until 8:30 pm intensity had dropped to 7.75.
Finally, going back further, we had Biologics this morning. It was not strong, but it happened when I woke up and fell back to sleep, so I forget to mention it when I got back up.
Do you know how MSM is explaining away the massive amount of biologics in the air?
Yes, the air really is full of biologics and they have admitted it in mainstream media. I have been saying this since February 2009 when I first smell and tasted it in the air. I'm not saying this with any pride at all. That is not the point. I'm saying this because I really want people to know that I - and many others - can indeed smell and taste this... and it's not subtle. It's often overwhelming when they use it.
MSM actually began explaining it away in the mid 2010's. I bet you can guess what MSM is blaming it on. I'm including a couple links below that should be viral. It's astounding that this is being done to us. It's not "happening". It's being done to us.
If you have been watching this log, you know that we normally get hit at about 11 pm, then 12 m, then 1 am.
At 11:05 pm I began tasting the wide-spectrum components in the air. Intensity rose quickly to 8.5- and has already subsided back to "ambient" levels of 7.5+. This was a partial hit. The plume was already largely past my house when it reached ground level.
We'll see if we have the typical 12 m and 1 am hits up coming.
12:56 am (3/31)
Well, we didn't get hit at 12 midnight, but we are getting hit now, at the second predicted time.
At about 12:50 am (3/31) we were hit. Type is Model Cement, Chalky-Bitter-Pharma, and Burnt Electronics/Fungal with Inflammatory and Mercury additives. Intensity is rising at a medium rate and is now at 8.25+.
1:11 am (3/31)
The previous plume contained Biologics. When a plume is just beginning to hit us, the Biologic element sometimes takes a little longer to detect, especially when it's dispersed at a lower intensity. This is TYPE II: The type that induces flu-like symptoms.
March 29
Overnight
A relatively mild night of spraying last night. Intensity ranged from 7.25 to 7.5+. This is the mildest night we have had in months.
Do not take this as a good thing. We should not be sprayed at all. Those spraying us are committing the largest, most destructive crime in human history. Nothing compares to the damage they have done. Part of the population does not notice because it's subtle. They are destroying slowly, gradually, like boiling the frog.
So, spraying less is not good. Spraying less is not "less evil". Spraying - at all - is evil to the core.
There should be NO poisoning going on whatsoever. So, even though we had a milder-than-normal night of intentional poisoning, it is still poisoning, and it is still just as evil, not to mention that it is illegal in national and in international law.
11:08 am
At about 10:30 am, air intensity began to rise slowly. This is a high altitude hit that has likely drifted some distance before hitting us, so the edges have become dissipated, hence the slow rise-time.
The type profile of this intentional poison is the same, full-spectrum plume type that they have been using for months: Model Cement, Chalky-Bitter-Pharma, and Burnt Electronic/Fungal with Inflammatory and Mercury additives. Not surprisingly, the Inflammatory is the dominant component.
By the way, the Mercury and Inflammatory components were, once again, dominant throughout the night.
When I grew up in the 1970's, there was no such thing as a "contrail". As a sky watcher and collector of jet pictures (using a good, old fashioned copy machine and my school lunch money), I never saw nor heard of a "contrail", despite the fact that I eventually collected thousands of images over years of time. Despite the fact I read about hundreds of types of jets in books in the fantastic local library that I had access to. i never saw an image of a "contrail" nor was it mentioned in a book that I read from.
I am saying this to expose the fact that, when the toxic spraying began, they produced enormous trails, but they knew that they would eventually upgrade their technology to shorten the length and decrease the opacity of the toxic trails they were producing. They knew this was all part of the plan. In all likelihood, the technology that reduced the trail size was not yet implemented or ready when the spraying program began.
Then the propaganda campaign started. They began telling everyone through the vast media complex that is owned by 5 companies now, that these trails were "contrails", even though they did not exist historically (except at air shows where they had to intentionally pump chemicals into the engines to produce trails to enhance the show).
As a life-long skywatcher, this was the first time I ever saw or heard of a "contrail". But globs-owned media had to thrust the lying propaganda on the population to keep them believing that everything was "OK". They nearly always associated the word "harmless" with the word "contrail". This is neurolinguistic manipulation of the population. This was - and still is - sophisticated propaganda, being used against the public, which was made legal by the Obama administration. Word association is one of the most common forms of neurolinguistic propaganda. Keep your eyes open for it. It's used in the news and in TV shows and movies daily; Yes... Daily.
So the next phase in the operation to convince the public that jet trails are normal is the manipulation of history. You have heard that those who control history control the future. This is precisely the reason. If the public realized that, historically, jet trails did not exist (with a few very rare exceptions such as the antiquated Spey 512 water injection engine that is no longer in service), then the public would realize that something changed. The globs do not want the public to realize that anything has changed.
Those distributing millions of gallons of this toxic substance on the population had to convince the public that nothing had really changed. They had to convince the public that those jet trails had always been there. They even, as you would expect, created fake video and newspaper articles claiming that jet trails were such a problem that they had to alter the design of jet engines to prevent the trails from "covering the sky".
This is another type of propaganda. They create stories (complete fabrications) that are so over-the-top, it's hard for the public to believe they are absolute lies. In this case, none of this is true. The skies were never covered. No technology was ever widely distributed in commercial jets to stop them from producing trails. None of this ever happened. This is all simply an over-the-top fabrication to keep the public believing - the decimation of the skies they have seen suddenly appear between 1995 and 2005 around the world - is "perfectly normal" and harmless and has been going on for decades.
But has anyone asked the question: If they implemented this technology in the 60's and 70's to prevent contrail formation (as they falsely claim), then why did all these trails only begin appearing between 1995 and 2005? And why do they still appear?
In the 90's whistle blowers came out and exposed that - for decades - old microfilm and microfiche records were being taken from public libraries, altered, and then placed back in the libraries. They rewrote news articles and fabricated pictures, all to deceive the public in various ways. And guess what. Mainstream news blamed "the Russians". I was there. I heard it all. The lying is not new. The altering of history is as old as history itself.
"History is written by the victors." -Winston S. Churchill
"He who controls the past controls the future. He who controls the present controls the past." -George Orwell, 1984
"History is written by those who have hanged heroes."
They had to change history to control the present and direct the future, and that is exactly what they have done. They have even inserted trails into movies used in commercial clips, such as this:
People must remember that entire countries were entirely deceived through mainstream propaganda during both world wars and many times since. To think that it would not happen today is an exercise in colossal denial.
Propaganda is a strange thing because the art of inducing lies into the human mind is a strange process full of unexpected twists and turns. People must trust their own memories rather than media. They must pull out their own photos and see if trails exist in the past. They aren't there. Although you will see fake social media accounts with people claiming they are there. These are fake accounts created to propagandize the public.
We are living in a time of deception like no other, and it's only going to get worse unless everyone stands up and makes the decision that truth is more important than how we feel about it. Putting truth above emotion is a fundamental feature of maturity.
At just about 12 noon (a time that they hit us nearly every day), we were hit with a strong plume of the same, wide-spectrum type: Model Cement, Chalky-Bitter-Pharma, and Burnt Electronic/Fungal with Inflammatory and Mercury additives. Interestingly, there was also the Drywall Dust that appeared during this plume as well. Intensity is rising quickly and is now already at 8.75.
The attack on all life continues.
1:12 pm
Just went to the post office, which is close by, and saw 6 (six) spraying jets in the 20 minutes I was outside. All had short, non-persistent plumes. All except 1 were going in the same direction. They were also doing horizontal layering where a jet was flying off in the distance. A couple minutes later another flew parallel to the first about a mile north. This is how the carpet-spray - covering wide areas systematically.
At about 1 pm, as usual, a plume reached ground level again thrusting the horrible taste/smell in the air to the current intensity of 8.75-, which is horrible and debilitating.
This morning, after an unusually mild night of spraying, the morning was mild as well (until we got hit). It felt fantastic. I felt energetic, enthusiastic, optimistic, and not-achy. Now with the air intensity back up to typical levels (in the 8's), It makes us feel tired, listless, weak, shaky, unmotivated, apprehensive, and much more. We just push-through-the-poison day after day to do what we have to in order to survive.
Life is not supposed to be this way. Those spraying us have no right to do so. They only do it based on their belief that they are entitled do to whatever they want to whomever they want as long as they can get away with it.
I am doing what I can. If not already doing so, please muster the courage and drive to speak out about these horrendous attacks on billions who vastly outnumber those who do evil in secret so the public will not know. They are afraid of you when you are brave. They are afraid of truth.
It is only when we are afraid that they are not. This is one of the primary reasons they spray us with "the fear drug", which is mercury.
It's up to us how long this continues.
And so, the attack on all life continues on our watch.
Today is your day if you are brave enough to make it so.
2:41 pm
I have been cooking lunch and prepping for dinner in the past 30 minutes and saw 2 plumes being released out my kitchen window. Keep in mind that the field of view of this window is narrow, so I wonder what has been going on in the remaining 80% of the sky during this time. Of course, the 2 jets I saw out the window flew directly over the house, as they so often do.
At about 2:35 pm we were hit with a plume of type Model Cement, Chalky-Bitter-Pharma, and Burnt Electronic/Fungal with Inflammatory and Mercury additives. I can also detect the Drywall Dust type again. Intensity is now 8.5 and rising at a medium rate. The Drywall Dust and Chalky types are dominant.
10:12 pm
I have not logged much this afternoon because there was not much going on in terms of discrete plumes. Air intensity has oscillated up an down between intensity 7.75 and 8.5. Intensity has gradually moved up and down throughout the day. Despite this, I never let myself forget that there should be no poison in the air at all.
We had our daily break from just after 8:30 pm until just before 10 pm.
Just before 10 pm we were hit with a wide-spectrum plume of type Model Cement, Chalky-Bitter-Pharma, and Burnt Electronic/Fungal with Inflammatory and Mercury additives. This is the toxic combination we have had in the air all day. Intensity now is 8.25 and may have peaked because it's not changing much now. As is usually the case at night, the Inflammatory component is dominant.
The attack on all life continues.
1:02 am (3/30)
The air intensity has continued to be fairly steady since 10 pm. Intensity has remained nearly 8.25 the entire time. The mix in the air is the same, and the dominant component is still the Inflammatory additive.
As I type this, I can taste the horrible bitter, metallic, myriad of flavors that make up the poisons they are spraying. They are always present.
March 28
Overnight
Another heavy night of spraying, although a little less intense than the night before. The type in the air through the night was Model Cement with Inflammatory and Mercury additives. The Inflammatory and Mercury additives were far dominant, as is nearly always the case these days. Intensity ranged between 7.75 and 8.75 most of the night based on the times I was awake.
11:41 am
This morning we have, once again, had continuously bad air with an intensity of 8 to 8.25 throughout the morning. A few months ago we would have had discrete plumes at odd-numbered hours. Now there are seldom breaks. They keep the air very contaminated constantly with only a few "breaks" (which aren't really breaks) during the day.
12:04 pm
It's interesting how we get hit nearly every day at 12 noon and 12 midnight, and today is no exception.
Right at 12 noon (based on my computer clock) I began smelling and tasting a wide-spectrum plume with all these toxic types/additives mixed together: Model Cement, Chalky-Bitter-Pharma, Burnt Electronics/Fungal, Inflammatory, Mercury. Intensity is rising at a medium-fast rate and is now (12:07 pm) at 8.5+.
Everywhere you look where you have a view of a mile or more, you will see "the haze". It's everywhere. No matter what view you see on TV or what country it is in, the haze is there.
I have been watching this for years. Having taken flight lessons when I was younger, I know they have a certain way of declaring "visibility". When you have a clear view of 30 miles or more, it's call "unlimited visibility".
Here is the answer copied/pasted directly from ChatGTP just now:
Question:
What do pilots call it when you have a clear view of 30 miles or more?
Answer:
When a pilot has a clear view of 30 miles or more, they refer to it as "unlimited visibility." This means that there are no significant obstacles or weather conditions that would hinder their ability to see at least 30 miles in all directions. It's important for pilots to have unlimited visibility when flying, as it allows them to navigate more easily and avoid potential hazards.
If you have been watching (I have), you will notice that there is virtually no view of any country anywhere that has unlimited visibility anymore. I have seen searching for years and have never seen one. It is astonishing that no one is talking about this.
The lack of unlimited visibility should not surprise us who know what is going on. Those who are older and have flown have noticed the haze that encircles the entire Earth. Back in the 70's and 80's, when flying, you could barely see the transparent atmosphere around the Earth. Now, however, it's a bright, radiating, metallic-like, haze-filled fog that never goes away.
It's astounding how these pattern-changes are right before the eyes of the world, yet, no one talks about them. Nevertheless, I point this out so, perhaps, we can begin to bring this up to friends and family to help them see what is being intentionally done to this planet.
The haze gradually appeared over the past 20 years during the same time period widespread spraying began. The haze is not water vapor. It is intentionally released, toxic metals and other substances, that have been mass-injected into the atmosphere around the entire Earth.
For years during interviews, I have called this spraying operation "the largest human operation in history". Nothing even comes close, and it's absolutely true. Nothing this large or this impacting has ever been thrust upon the world, and you have paying for it, with your taxes, your health, and the lives of those you love.
Don't let it continue. Speak out daily.
The daily intentional poisoning of the world continues.
As expected, the air has been continuously elevated this afternoon. Intensity has been in the range of 7.75+ to 8.75. There have been no breaks between plumes. This is the new tactic: Keep the air intensity continuously toxic with no breaks between plumes.
Just before 5 pm we have been hit with another plume. Type is Model Cement, Chalky-Bitter-Pharma, and Burnt Electronics/Fungal with Inflammatory and Mercury additives. Intensity is rising at a medium-fast rate and is now at 8.5+. The Model Cement type is the dominant component.
Before this plume hit, the air had lost the Model Cement component, but now it's back.
7:38 pm
This late afternoon was oddly mild compared to the rest of the day. From about 5:50 pm until 7:25 pm intensity dropped to 7.5+.
At about 7:25 pm we were hit with a wide-spectrum plume of type Model Cement, Chalky-Bitter-Pharma, and Burnt Electronics/Fungal with Inflammatory and Mercury additives. Intensity is rising at a medium rate and is now at 8.25.
I just want to be clear that, when I use the word "mild", I mean in relation to recent history. There is nothing truly mild about being poisoned at intensity 7.5, but compared to recent history, it is the intensity that the air drops to between plume - when we have space between plumes which is becoming increasingly rare.
So the mass poisoning of your planet continues, funded by your tax dollars, facilitated by those who don't want to know what is going on. Sad days.
11:26 pm
The previous plume peaked at intensity 8.5 then dissipated at the same rate.
From about 8:30 pm until 11 pm we had our nightly "break". Intensity dropped to 7.5 and remained there.
At 10:58 pm we were hit with a strong, fast-rising, wide-spectrum plume of type Model Cement, Chalky-Bitter-Pharma, and Burnt Electronics/Fungal with Inflammatory and Mercury additives. Intensity rose to intensity 8.75+ by 11:20 pm.
It's funny how they often hit us within a few minutes of the top or bottom of the hour. Of course we have to factor in that it takes about 5 to 10 minutes for plumes to penetrate this old, drafty house, so ultimately, to get accurate hit times, we have to strip 5 to 10 minutes from each hit time.
12:55 am (3/29)
Well, they are right on time again. This is our nightly 1 am hit that we receive almost every night.
Just a minutes ago we were hit with a wide-spectrum plume of type Model Cement, Chalky-Bitter-Pharma, and Burnt Electronics/Fungal with Inflammatory and Mercury additives. Intensity is rising at a medium-fast rate and is now at 8.
March 27
Overnight
Another heavy night of spraying, which was worse than last night. The type in the air through the night was Model Cement with Inflammatory and Mercury additives. The Inflammatory and Mercury additives were far dominant, as is usually the case these days. Intensity ranged between 8.25 and 9 most of the night based on the times I was awake.
We are living in historic times. What will it take?
9:23 am
We have been smothered by the Barium type, Chalky-Bitter-Pharma type, and Burnt Electronics/Fungal type with Inflammatory and Mercury additives since at least 6 am this morning. Intensity was at 8.5 this morning and is now at 9.26 as I type this. All components have been nearly equally strong.
We are being sprayed folks.
10:01 am
The intensity has become worse. The intensity of the previous plume is now 9.75 and still rising.
10:44 am
After sustaining the intensity so-very-high all morning, at 10:20 am it quickly dropped to intensity 7.5. Then, just a couple minutes ago - and as I type this - intensity is racing upward again and has already reached 8.5- right now. These are low-altitude, layered plumes keeping us breathing highly toxic substances for prolonged periods of time, and in our area, they are doing this without leaving any persistent plumes in the skies.
What are people thinking? Just a few years ago here the skies look like a war zone with upwards of 10, 20, or often 30 (sometimes more) huge plumes crisscrossing the sky all day, every day. Now, suddenly, plumes are all but gone. Are they going to blame this on "global warming" mythology like they blame everything else? How does the typical person rationalize it all away?
I know. They don't. The don't rationalize it away because they don't think about it. The world is, quite literally, under attack, but those who control the narratives have conditioned the world so well, the world has, in part, become a silent partner in crime by remining silent about the largest, most toxic, damaging, mortal event to ever take place.
It - is - astonishing to watch this unfold !
Toxic intensity is now back up to 8.75 and still rising. The type profile is the same mentioned above first this morning.
11:59 am
Intensity of the previous plume increased to 9.5-, then at about 11:20 pm it began decreasing fairly quickly and has now decreased to 8-. The type profile in the air is still the same. Only the intensity has changed.
1:23 pm
Intensity settled to 7.5+ after the previous plume dissipated.
At 1:19 pm we were hit with a wide-spectrum plume of type Model Cement, Chalky-Bitter-Pharma, Burnt Electronics/Fungal with Inflammatory and Mercury additives. Intensity is rising at a medium rate and is now 8.25.
This - the systematic poisoning of the population - must become the #1 political discussion in every country in the world.
6:08 pm
At 3 pm (exactly) we were hit with a wide-spectrum plume of type Model Cement, Chalky-Bitter-Pharma, Burnt Electronics/Fungal with Inflammatory and Mercury additives. Intensity rose quickly and peaked at 8.5+.
At 6:03 pm (just a few minutes ago) we were hit with another wide-spectrum plume of type Model Cement, Chalky-Bitter-Pharma, Burnt Electronics/Fungal with Inflammatory and Mercury additives. Intensity is rising at a medium-fast and is now 7.75.
1:53 am (3/28)
We have had several plumes hit us tonight, but none of them were insanely strong. Still strong, but not like it has been the past few days. They peaked between intensity 8 and 8.75. They all had the horrific wide-spectrum type profile of Model Cement, Chalky-Bitter-Pharma, and Burnt Electronics/Fungal with Inflammatory and Mercury additives.
I did not record the times, but the last plume hit us about 30 minutes ago... about 1:30 am. The current intensity of this last plume is now 8.75-.
2:23 am (3/28)
The intensity of the previous plume is not dissipating. The current intensity is 8.75. They, again, are layering.
March 26
Overnight
Another heavy night of spraying, although a little less heavy than last night. Are you having vivid dreams? Mercury, which the plumes contain, raise adrenal-related hormones and lower the critical neuro-regulator GABA which not only results in anxiety and insomnia, but also shallow sleep and/or vivid dreams. This is what heavy nights of spraying do to us.
The type in the air through the night was Model Cement and Sharp Metallic with Inflammatory and Mercury additives. The Inflammatory and Mercury additives were dominant, as usual.
11:01 am
We about 5:20 am we were hit with a strong plume of type Model Cement with Inflammatory and Mercury additives. The Inflammatory and Mercury additives were dominant. Intensity rose at a medium-fast rate and peaked at 9.
At about 9:30 am we were hit with a plume of type Model Cement with Inflammatory and Mercury additives. Intensity rose at a slow rate and, as I type this, has risen to 9- and continues to rise.
These morning plumes that rise slowly and remain intense through the afternoon are a relatively recent phenomenon occurring only in the past several months. Before this, we had typical plumes that rose at a medium-fast rate and dissipated within about 45 to 60 minutes. Then we would have a break until another hour later (we had 2 hours between plumes) when the next plume would hit us. Now the intensity is high throughout the afternoon on most days... all afternoon with no breaks.
It's not going to get better. It's only going to get worse. The choice is simple. Get involved in exposing the largest crime against humanity in human history to everyone you know, or stay silent. Staying silent is easy in the short term but very hard in the long term. Speaking out may be challenging for some in the short term but is extremely rewarding in the long term. We should always live our lives for the long-term.
The choice is ours.
12:32 pm
Although air intensity has been strong since the previous plume, by about 11:40 pm, air intensity has dropped to 7.5+.
At about 12:20 pm we were hit with a plume of type Model Cement, Copper, and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. Intensity is rising at a medium-fast rate and is now already up to 8.75.
The attack on all life continues.
1:59 pm
The previous plume at 12:20 pm dropped pretty quickly after peaking at intensity 9. By 1 pm, intensity had dropped back to 7.75.
Then, just after 1 pm we were hit by a plume of type Model Cement with Inflammatory and Mercury additives. It's like going back to the old days when we are hit with 3-part plumes. Intensity rose quickly - indicating a direct vertical hit - peaking at 8.75 by about 1:20 pm. Intensity then dropped back to the current level of 7.75 by about 1:50 pm.
The air has been continuously between intensity 8 and 9 since the previous plume hit us. They are clearly layering to keep us from having breaks between poisonings. This is absolutely insane, almost as insane as the level of denial that some continue to harbor on this historic issue.
6:02 pm
Well, just after the previous log entry we were hit with a plume that increased intensity while adding a new spectrum of poisons to the mix.
If you look over the log, you'll see that the types used this afternoon so far have been the Model Cement type with Inflammatory and Mercury additives. At 5:38 pm we were hit with a wide spectrum plume that expanded the poisonous mix to include Model Cement, Chalky-Bitter-Pharma, and Burnt Electronics/Fungal with Inflammatory and Mercury additives.
The mass poisoning continues. Please know that, when I say this, it's not for dramatic purposes at all. It is quite literally what is happening.
At about 7:40 pm we were hit with a wide spectrum plume of type Model Cement, Chalky-Bitter-Pharma, and Burnt Electronics/Fungal with Morgellon's, Inflammatory and Mercury additives. Yes, the Morgellon's type has been included in this event. Intensity is rising at a medium rate and is now 8.5+. The Morgellon's and Model Cement components are dominant.
We had our nightly break from about 8:40 pm until 11 pm. At about 11 pm we were hit with a wide spectrum plume of type Model Cement, Chalky-Bitter-Pharma, and Burnt Electronics/Fungal with Inflammatory and Mercury additives. Intensity rose at a medium-fast rate and is now 9- and still rising. The Chalky and Inflammatory components are dominant.
The poisoning of all life continues. How much longer?
1:16 am (3/27)
The air has been horrible all night after "the break" ended mentioned in the previous plume. The Inflammatory component has been dominant so that our veins stick out of our arms and hands and I feel like a pressurized water balloon. The air still contains the same wide-spectrum components mentioned in the previous log entry.
The poisoning of the world continues on our watch.
March 25
Overnight
A very heavy night of spraying with regularly-spaced plumes throughout the night. Although I may have missed logging some plumes because of sleep, this is a list of plumes I know about.
They hit us at approx. these times: 1:30 am, 5:30 am, 7:40 am. The type profile for all these plumes was the same: Model Cement and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. In all cases, the Inflammatory additive was far dominant.
12:41 pm
At about 9:30 am we were hit with a wide-spectrum plume of type Model Cement, Chalky-Bitter-Pharma, and Burnt Electronics/Fungal types with Inflammatory and Mercury additives. This was a slow-rising plume that finally peaked at intensity 8.75+ at about 10:20 am.
Just after 12 noon we were hit with another, identical, wide-spectrum (it contains a lot of ingredients) plume that rose at a medium-fast rate and peaked at intensity 8.75+ (again) at about 12:25 pm. This plume is now declining. The current air intensity is 8- and decreasing.
2 pm
At about 1:30 pm we were hit with another wide-spectrum plume that rose at a fast rate and peaked at intensity 9.75+ at about 1:50 pm. This plume is now declining. The current air intensity is 8.75-.
In the past weeks, these wide-spectrum plumes had a pretty high concentration of the Chalky and Burnt components. In the past few days, these components are present at a much lower intensity in relation to the other components. The same is true for the plume that we are breathing now. In this case, the Model Cement type type and Inflammatory additive are both vastly dominant.
4:54 pm
Since the previous log entry, there have been no breaks at all. The air has been continuously intense. If you have been following this log, you know that this is the new strategy they have been using; they keep the air intense for long stretches of time. Previously, we would get hit with a plume every two hours that you could predict with 15-minute tolerance.
The type that has been in the air all afternoon has been the same combination of components (outlined above) with 1 change. At roughly 3:30 pm the Model Cement type was replaced with the Barium type. Otherwise, we are breathing the same wide-spectrum array of poisons.
Intensity has not let up and has wavered between 8.5 and 9.5. The dangerous Inflammatory additive has been dominant since the previous log entry. The current air intensity is 9.25+.
The attack on all life continues.
6:54 pm
The intensity has NOT subsided since the previous plume. In fact, just after 6:30 pm we were hit with another plume that thrust the Model Cement component up.
Since the previous entry intensity has been between 9.25 and 9.75 with the Inflammatory additive being dominant the entire time. Is has been brutal.... Brutal!
Current air intensity is 9.5 with a wide spectrum of ingredients (which have been in the air all day): Model Cement, Chalky-Bitter-Pharma, and Burnt Electronics/Fungal with Inflammatory and Mercury additives.
What will it take to motivate the public to make THIS subject the political conversation that it should be?
All this world needs to do to destroy everything is "nothing". There are people in charge who are perfectly willing to do that as long as the public does not interfere.
10 pm
The intensity continued at high intensities and did not begin to decline until 7:45 pm. By about 8 pm intensity had declined to 7.5-. This was our evening break. It was the first break we had all day.
At right about 9 pm we were hit with a plume of type Model Cement with Mogellon's, Inflammatory, and Mercury additives. Yes, they hit us with the Morgellon's type again when it was not in the morning. They have been doing this for the past few weeks. Before that; never. It was only sprayed on us in mornings.
Intensity of the 9 pm plume dissipated by 9:45 pm and intensity fell back to the current level of 7.5.
The previous plume cleared back near "ambient" levels of 7.5+ at about 9:40 pm.
At about 10:50 pm we were hit with a plume of type Model Cement with Mogellon's, Inflammatory, and Mercury additives. Intensity is rising quickly and has already hit 8.5+ and is still rising.
11:51 pm
At about 11:40 pm we were hit with a plume of type Model Cement and Copper with Inflammatory, and Mercury additives. Intensity rose quickly and is now already at 9.25 and still rising. This has been yet another horrific night of spraying.
Your tax dollars at work.
Wake up world. This is happening.
1:07 am (3/26)
We have had no break since the previous toxic plume hit us. Intensity is now 9.5- and has been there since the last plume rose to that level, over an hour ago.
May God help us.
March 24
Overnight
The somewhat heavier night of spraying. Intensity ranged between 7.5+ and 8. The type profile was typical Model Cement with Inflammatory and Mercury additives. The Mercury and Inflammatory additives were stronger than other components as is usually the case.
At about 4:30 am we were hit with a very strong plume of the same type. Intensity rose to 9.25 and then subsided over the following hour.
10:16 am
At about 9:30 am we were hit with a very slow-rising, wide-spectrum plume of type Model Cement, Chalky-Bitter-Pharma, and Burnt Electronics/Fungal with Inflammatory and Mercury additives. Intensity has risen at a slow and steady pace and is now at 8.25+ and still rising. Remember, this very slow rising am plume is the pattern on most days for months now.
I talked to a friend in the southern Pennsylvania who said they could not sleep through most of the night. I immediately checked radar and saw a huge precipitation system stretching from their area all the way to Texas. Since they usually concentrate spraying of the Barium type during and ahead of such systems, you would expect to have health, sleep, and emotional disturbances.
The Barium type is always coupled with the Mercury type. The Mercury type induces mercury symptoms and, as such, changes emotions, lowers magnesium, raises adrenaline, norepinephrine, dopamine, and estrogen thereby causing all kinds of stress, insomnia, heightened fears and emotions, anger, OCD, and a host of other issues.
Mercury exposure depletes the body of magnesium, and in 80% of the U.S. population, magnesium is required to create the enzyme catechol-O-methyltransferase (COMT) which is used to break down adrenaline, norepinephrine, dopamine, and estrogen. So when mercury is present, 80% of the population has lower ability to break down these hormones causing personality changes.
More specifically, in 30% of the U.S. population, the body cannot produce catechol-O-methyltransferase without magnesium. This process is completely dependent on magnesium.
In 50% of the U.S. population, magnesium is required for 50% of catechol-O-methyltransferase production, so these individuals are only partly affected emotionally in the presence of mercury.
In the remaining 20% of the population, catechol-O-methyltransferase may be produced without the presence of magnesium, so these individuals are largely unaffected emotionally by mercury.
Nevertheless, in all categories above, mercury still affects thousands of other hormonal, enzymatic, amino-acid, and protein processes and causes considerable damage to every body system. For example, mercury blocks the production of Gamma-Aminobutyric Acid (GABA) which is a primary neuro-regulator, so in the presence of mercury, all are prone to looping thoughts and songs, forgetfulness, hyperactivity, impulsiveness, twitching and jitteriness, and numerous other issues induced when GABA is depleted.
Undoubtedly, mercury-induced emotionalism is one of the mechanisms globalists use to induce chaos in the public to legitimize taking away your God-given rights. The state does not have the authority to remove God-given rights. Only God Himself does. When the state takes upon itself false authority reserved only for God, the state inherits the title "God State".
Globalists-run governments create problems so they can profit their own companies through government contractors (owned by the globalists themselves) and so they can sequester power away from the public so as to secure their own power over the public in perpetuity - without end. This secures their tyranny and ensures their never-ending stream of unimaginable money originating from the largest wealth stockpile in the world: You; the public.
No breaks, no plumes. The air has been continuously intense with intensity levels hovering between 8.25+ and 9.25+ since the last log entry. The type profile remains the same with all the usual suspects: Model Cement, Chalky-Bitter-Pharma, and Burnt Electronics/Fungal with Inflammatory and Mercury additives. Current intensity is 9.25+.
The poisoning of the world continues on our watch.
3:18 pm
Air intensity has dropped at a medium rate for the past hour and is now 7.75+.
4:06 pm
At about 3:50 pm we were hit with a plume of type Model Cement, Chalky-Bitter-Pharma, and Burnt Electronics/Fungal with Inflammatory and Mercury additives. Intensity is rising at a medium rate and is now 8.25+.
7:04 pm
The air has maintained intensity above 8 most of the time since the last log entry.
At about 6:50 pm we were hit with a plume of type Model Cement, Sharp Metallic, Chalky-Bitter-Pharma, and Burnt Electronics/Fungal with Inflammatory and Mercury additives. Intensity is rising at a medium-fast rate and is now 8.5.
7:15 pm
The intensity of the previous plume is now 9.5 and still rising. The Model Cement type is the dominant component.
11:33 pm
The air intensity from the previous plume finally subsided at about 9:15 pm. Intensity fell to 7.25+ and remained thereabout until about 11:10 pm. At that time we were hit with a plume that rose quickly to the current intensity of 9.75-. This is obviously a direct hit. The type profile is Model Cement, Chalky-Bitter-Pharma, and Burnt Electronics/Fungal with Inflammatory and Mercury additives. The Inflammatory additive is the dominant component, as it usually is at night.
The attack on all life continues. How long can we bear it?
1:10 am (3/25)
At about 1 am we were hit with a plume of type Model Cement, Sharp Metallic, Chalky-Bitter-Pharma, and Burnt Electronics/Fungal with Inflammatory and Mercury additives. Intensity is rising quickly and is now already at 9.75. Yes, this is very, very strong and rose very quickly. The Sharp Metallic type is the dominant component, which is a bit unusual for late at night.
The attack on all life continues, day and night.
March 23
Overnight
The air was again horrible into the very early morning.
The remainder of the night was a slightly milder night of poisoning with ambient intensity between 7.5- and 7.5+. The type profile was Model Cement with Inflammatory and Mercury additives, the usual poisons. The Mercury additive continues to be stronger than other components.
Mercury is their favorite poison and is the reason we have the wide array of diseases we have today.
The entire morning we have not had a single discrete plume. Intensity increased from the overnight level to the current level of 7.75+. This is enough to tire or exhaust a person in an hour or two. The odor and taste in the air is still plainly apparent for sensitive persons like myself.
We have a constant drizzle outsize. They hypernucleated away the incoming valuable rain to leave us with worthless micro-drizzle which effectively collects and carries the poisons into the soils.
2:59 pm
There still have been no discrete plumes hit us today. The overall intensity of the air has been continuous and has slowly risen all day. The current intensity is 8+.
Although I can detect no discrete "hits", the Biologic type has become detectable during this slow intensity rise since the last log entry. So technically, this would constitute a "hit", but since it rose so slowly, I did not note the time it became detectable, although it was some time since the previous log entry. The Biologic is TYPE II, means that it is associated with outbreaks of flu. The TYPE I, II, and III all have different, yet related odors, and cause different types of outbreaks.
As I keep saying, one day this will all come out. The world will finally realize what has been done to them and they will wish to God they had listened.
5:36 pm
At about 5:15 pm we were hit with a plume of type Model Cement, Chalky-Bitter-Pharma, Burnt Electronics/Fungal with Inflammatory and Mercury additives. Intensity is rising at a medium rate and is now 8.25.
8:17 pm
The previous plume peaked at 8.75. It lingered in the air for a long time.
At about 8:10 pm we were hit with a plume of type Model Cement, Chalky-Bitter-Pharma, Burnt Electronics/Fungal with Inflammatory and Mercury additives. Intensity is rising at a medium rate and is now 8.25.
10:22 pm
We had our nightly break from about 9 pm until 10:10 pm
Intensity dropped to 7.5- and remained there until about 10:10 pm. Intensity began creeping up at a medium-slow rate and is now at 8 and still rising.
The type profile is Model Cement, Chalky-Bitter-Pharma, Burnt Electronics/Fungal with Inflammatory and Mercury additives.
11:21 pm
At about 11:10 pm we were hit with another plume of type Model Cement, Chalky-Bitter-Pharma, Burnt Electronics/Fungal with Inflammatory and Mercury additives. Intensity is rising at a medium-fast rate and is now 8.5-.
12:09 am (3/24)
The previous plume has not subsided, or more likely, they are layering. Intensity continues at 8.75+ with the same horrific mix. Nothing more to say. The Inflammatory component is dominant, by far.
Wake up world.
March 22
Overnight
The air was horrible until after 1:30 am when it began to subside last night. Not good.
The remainder of the night was a typical but slightly milder night of spraying with ambient intensity between 7.5 and 7.75-. The type profile was Model Cement with Inflammatory and Mercury additives, as usual. The Mercury additive continues to be stronger than other components.
10:46 am
There have been no discrete plumes yet today.
Air poison intensity remains at 7.5 with the common mix of Model Cement with Inflammatory and Mercury additives.
11:23 am
At about 11:10 am we were hit with a wide-spectrum plume of type Model Cement, Chalky-Bitter-Pharma, and Burnt Electronics/Fungal with Inflammatory and Mercury additives. Intensity is rising at a medium rate and is now 8.25. The Model Cement component is dominant.
12:52 pm
We are just now getting hit with a wide-spectrum plume of type Model Cement, Chalky-Bitter-Pharma, and Burnt Electronics/Fungal with Inflammatory and Mercury additives. Intensity is rising at a medium rate and is now 8. The Model Cement component is dominant.
1:08 pm
The intensity of the previous plume is now 8.75+ and still rising.
1:34 pm
The intensity of the previous plume is now 9.25+ and still rising. The Model Cement component is still dominant.
2:30 pm
At 1:48 pm we were hit with a plume of type Barium, Chalky-Bitter-Pharma, and Burnt Electronics/Fungal with Inflammatory and Mercury additives. Intensity is rising quickly and is now already at 8.75+ and still rising. The Barium type is the dominant component. This plume hit us before the previous plume cleared. The previous plume has only declined to 8.75 by the time this plume hit.
It's another one of those horrific spray days.
3:40 pm
At about 3 pm we were hit with a plume of type Model Cement, Chalky-Bitter-Pharma, and Burnt Electronics/Fungal with Inflammatory and Mercury additives. Intensity rose at a medium-fast rate and peaked at 9. Intensity is now 8.25+ and falling. The Burnt Electronics/Fungal type is the dominant component. Once again, this plume hit us before the previous plume cleared. This is now the norm.
6:04 pm
The air has been consistently toxic since the last log entry. I looked out the window a few times only to see short, non-persistent plume spraying the typical "horizontal layering" pattern. First one sprays off in the distance, then 10 minutes later another spraying parallel to the first but a couple miles apart, then again, and again. This is clearly a way of covering wide areas in a systematic way.
As I type this, air intensity is 9.25. The type profile is Model Cement, Sharp Metallic, Chalky-Bitter-Pharma, Burnt Electronics/Fungal with Inflammatory and Mercury additives.
We have never, ever had such a large number of individual components used at the same time. This is historic and has been happening for only a few weeks now. It began here and there, then more often, and now daily. That is how they always "introduced" new types to the population; using gradualism.
The toxic attack on all life continues.
6:23 pm
At about 6:15 pm we were hit with a plume of type Barium, Sharp Metallic, Chalky-Bitter-Pharma, Burnt Electronics/Fungal with Inflammatory and Mercury additives. I have noticed this pattern over the past few days. They are spraying the same array of components by alternating between Model Cement and Barium as the dominant component. In this plume Barium is far dominant.
6:42 pm
The intensity of the previous plume is now 9.5+ and still rising.
7 pm
The intensity of the previous plume peaked at 9.75+ a few minutes ago. Intensity is now 9.25 and descending.
7:14 pm
At about 7:05 pm, we were hit with a plume of type Barium, Sharp Metallic, Chalky-Bitter-Pharma, Burnt Electronics/Fungal with Inflammatory and Mercury additives. Intensity of the previous plume had dropped to 8.75, but now this new plume has rapidly pushed intensity back up to 9.5- where is stands now.
This is another very intense day of spraying. Keep in mind that the intensity scale is 1 to 10.
8:53 pm
At about 8:10 pm, we were hit with a plume of type Model Cement, Sharp Metallic, Chalky-Bitter-Pharma, Burnt Electronics/Fungal with Inflammatory and Mercury additives. Intensity rose at a medium-fast rate and is now 9.5 and still rising.
You cannot have this type of toxicity without resulting in mortality. Consider the implications of this.
10:39 pm
By about 9:15 pm, air intensity had dropped to intensity 7.25+. This was the beginning of our evening break. It always feel amazing when intensity drops to this level. All my aches and pains go away, all the stress disappears, and I feel calm and peaceful. 7.5 is far from perfect, but it's below a threshold at which my body chemistry can return closer to normal.
At 10:28 pm we were hit with a plume of type Model Cement, Chalky-Bitter-Pharma, and Burnt Electronics/Fungal with Inflammatory and Mercury additives. This plume is rising slowly and only now reached intensity 7.75+. The Inflammatory component is dominant. We'll see what happens next.
12:39 am (3/23)
Just before midnight we were hit with a plume of type Model Cement, Sharp Metallic, Chalky-Bitter-Pharma, Burnt Electronics/Fungal with Inflammatory and Mercury additives. Intensity rose at a medium rate and is now 9.75.
The attack on all life - all those you love and care about - continues day and night.
March 21
Overnight
A typical but slightly milder night of spraying with ambient intensity between 7.5 and 7.75-. The type profile was Model Cement with Inflammatory and Mercury additives. The Mercury additive continues to be stronger than other components through the night and last night was, again, no exception.
At about 5:30 am we were hit with a plume that peaked at 8.75.
At about 8:35 am we were hit with a plume that has reached 8.5+ but continues to rise slowly.
Both plumes were of type Model Cement with Morgellon's, Inflammatory, and Mercury additives. Yes, they are using the Morgellon's type this morning. Why are they suddenly using this type for the past 2 weeks (mostly at night)? What does this type consist of that makes it produce the strange symptoms?
The 8:35 am plume continues to rise and has now reached intensity 9.25. The Morgellon's component is strongest, but all other components are not far behind. Is it going to be another horrific day of spraying?
10:58 am
A few minutes ago we were hit with a wide-spectrum plume of type Model Cement, Chalky-Bitter-Pharma, and Burnt Electronics/Fungal with Inflammatory and Mercury additives. Intensity is rising quickly and is already at 9.25+. The previous plume has not cleared when this plume hit us, thus the current intensity is already so high.
4:16 pm
"The Killing Skies"
At 12 n (they hit us at this time almost every day) they hit us with this horrible mixture: Sharp Metallic, Drywall Dust, Chalky-Bitter-Pharma, with Inflammatory and Mercury additives. Intensity rose at a medium rate and hit 9.5, which is nightmarishly strong. It then continued to climb slowly reaching intensity 10 at about 2pm. We have had no breaks today!
This mix continued at this intensity (10) until about 3:30 pm when it began to decline at a medium rate eventually hitting intensity 8 by 4 pm.
At about 4:05 pm we were hit again with this type: Model Cement, Sharp Metallic, Chalky-Bitter-Pharma, Burnt Electronics with Inflammatory and Mercury additives. Intensity is rising at a medium-fast rate and has already reached intensity 8.75+ as I type this.
We have never experienced this intensity of spraying, ever.
It is absolutely unbelievable that the public is not talking about this activity every day, every where they go. I know the main reason is because the public, for the most part, cannot smell it. Many can, and those who cannot should absolutely be listening to those who can.
This is the largest, most destructive crime against humanity in human history. One day the entire world will realize how many loved ones they lost to this attack long before their time.
What can you do to help?
Make it personal !
Let people know that the health issues they have can be attributed to the poisons known to be in these plumes: lead, arsenic, mercury, cadmium, aluminum, strontium, barium, manganese, and more. This is what you are breathing.
I went out for a few minutes today and saw 1 jet without a trail. It did not look commercial but I was unable to check it at the time.
There is a haze everywhere when visibility should be crystal clear. The haze consists of the nanoparticles that you are breathing, intentionally, for a purpose, and that purpose is not good for anyone other than those directing the operation at the highest levels.
Stopping this is up to every one of us. Become educated quickly, then become vocal, and most of all...
MAKE IT PERSONAL ! Because it is.
4:37 pm
The intensity of the previous plume is now 9.5+ and still rising. Absolutely insane. They are hurting us folks.
4:46 pm
I just went outside to start my car and a jet was headed directly over my house leaving a short, non-persistent trail. I just checked flight tracking to see if it was commercial. It was not. Here is a screen shot that I just took now at about 4:45 pm. I life east of Bangor, and as you can see, there are NO commercial jets there:
5:46 pm
Since the previous plume, intensity has continued to increase and has now reached intensity level 10 again. The type profile is the same as outlined in the log entry of 4:16 pm.
7:12 pm
The previous intensity did not begin to decline until about 6:40 pm. Beginning at that time it began to decline at a medium rate and is now 8.5-.
That has been the worst spraying day in recent history.
8:03 pm
At 7:15 pm, just a few minutes after I made the previous log entry, we were hit with a plume of type Model Cement, Sharp Metallic, Chalky-Bitter-Pharma, and Burnt Electronics/Fungi with Inflammatory and Mercury additives. Intensity rose at a medium rate to intensity 9.5 and then subsided at the same rate. Intensity is currently at 8.25+.
8:31 pm
At about 8:15 pm we were hit with a plume of type Model Cement, Sharp Metallic, Chalky-Bitter-Pharma, and Burnt Electronics/Fungi with Inflammatory and Mercury additives. Intensity is rising at a medium rate and is now 8.5+. This plume hit us before the previous plumes cleared, which is the norm for the past few weeks.
10:54 pm
The previous plume rose and peaked at 9.75 and then fell at the same rate.
Air intensity finally fell back close to "ambient" levels at about 9:15 pm. Intensity did not fall all the way back to 7.5 but 7.75 and remained there until 10:44 pm.
At 10:44 pm we were hit with a plume of type Model Cement, Sharp Metallic, Chalky-Bitter-Pharma, and Burnt Electronic/Fungal with Inflammatory and Mercury additives. Intensity is climbing at a medium rate and is now at 8.5-.
While the world continues to pretend everything is OK, the world is under a systematic attacks on many levels. There is so much more going on than many realize. It will all come out in the end.
12:58 am (3/22)
Right on schedule, we were hit shortly before 12 midnight. The type profile was the same type that has been in our air most of the day: Model Cement, Sharp Metallic, Chalky-Bitter-Pharma, and Burnt Electronic/Fungal with Inflammatory and Mercury additives. Intensity rose at a medium-fast rate, peaked at 8.75, and then subsided, and is still subsiding. Current intensity is 8.25- and still falling.
Are we going to get a 1 am round of poisoning? We'll see.
In fact, as I was typing that last sentence, I'm just beginning to taste the air intensity increasing. It's now 1:01 am and we usually get hit at 12 m and 1 am every night. The type profile is the same as it has been all day. See the previous plume at 10:44 for details.
Time is now 1:02 am and intensity is 8.25 and still rising.
March 20
Overnight
A somewhat "mild" night of spraying with ambient intensity between 7.5- and 7.5+. The type profile was Model Cement and Sharp Metallic with Inflammatory and Mercury additives. The Mercury additive has been consistently stronger than other components through the night and last night was no exception.
11:21 am
We have had 3 plumes this morning so far.
At about 5:30 am we were hit with a plume of type Model Cement, Chalky-Bitter-Pharma, and Burnt Electronics/Fungal with Inflammatory and Mercury additives. Intensity rose at a medium-fast rate and peaked at 8.75.
At about 8:40 am we were hit with a plume of type Model Cement, Chalky-Bitter-Pharma, and Burnt Electronics/Fungal with Inflammatory and Mercury additives. Intensity rose at a medium-fast rate and peaked at 8.5+.
At about 11:15 am we were hit with a plume of type Model Cement, Chalky-Bitter-Pharma, and Burnt Electronics/Fungal with Inflammatory and Mercury additives. Intensity is rising at a medium rate and is now 7.75+.
The poisoning of all life continues funded by your tax dollars.
12:42 pm
At about 12 noon, as is the case most days at this time, we were hit with a wide-spectrum plume of type Model Cement, Chalky-Bitter-Pharma, and Burnt Electronics/Fungal with Inflammatory, and Mercury additives. Intensity rose at a medium rate and is now 9. Horrible!
1:32 pm
At about 1:25 pm we were hit with a wide-spectrum plume of type Model Cement, Chalky-Bitter-Pharma, and Burnt Electronics/Fungal with Inflammatory, and Mercury additives.
2:53 pm
A few minutes ago we were hit with a plume of type Barium, Chalky-Bitter-Pharma, and Burnt Electronics/Fungal with Inflammatory, and Mercury additives.
Never before have been consistently sprayed at this frequency. Plumes are often 60 to 90 minutes apart.
3:51 pm
The previous plume peaked at intensity 8.75 and then began to dissipate. This plume his us before the previous plume dissipated.
A few minutes ago we were hit with a plume of type Model Cement, Chalky-Bitter-Pharma, and Burnt Electronics/Fungal with Inflammatory, and Mercury additives, just like the previous plume.
Plumes now hitting us about 60 minutes apart.
4:27 pm
The previous plume peaked at intensity 9.5- at 4:19 pm.
7:14 pm
At 6:02 pm we were hit with a plume of type Barium, Chalky-Bitter-Pharma, and Burnt Electronics/Fungal with Inflammatory, and Mercury additives. Intensity rose at a medium-fast rate and peaked at intensity 9.25 at 6:22 pm.
A couple minutes ago we were hit with a plume of type Barium, Chalky-Bitter-Pharma, and Burnt Electronics/Fungal with Inflammatory, and Mercury additives. Intensity is now 8.5 and rising at a medium-fast rate.
8:13 pm
At about 8:05 pm we were hit with a plume of type Barium, Chalky-Bitter-Pharma, and Burnt Electronics/Fungal with Inflammatory, and Mercury additives. Intensity is now 8.5+ and rising at a medium-fast rate.
8:29 pm
The intensity of the previous plume is now 9.25-.
10:40 pm
Since the last log entry, we have been hit with 2 horrific plumes.
At 9:02 pm we were hit with a plume of type Barium, Chalky-Bitter-Pharma, and Burnt Electronics/Fungal with Inflammatory, and Mercury additives. Intensity rose at a medium-fast rate and peaked at 9.5+.
Many plumes today contained the Barium type which normally precedes incoming precipitation. So I decided to check radar and saw a huge system headed our way. I have said this for years. This has been the pattern that I have witnessed for years with the Barium type. The Barium type is clearly associated with weather manipulation, specifically, hypernucleation which stops rain and snow and causes the atmosphere to hold the moisture and dump it later.
Those who have been watching know that this was the cause of both the California drought and also the cause of the flooding in the mid-west. The moisture coming in to California was hypernucleated for years and then dumped on the midwest in the mid 20-teens destroying many people's homes and lives. One day the world will realize what these monsters have done to us and to the entire world.
This is also whey it's clearly there are multiple programs going on here. Weather manipulation is one program, as evidenced by the association between type plumes and the weather systems. The other program is clearly much more devious and, I have no doubt, has already shortened many lives, more than most realize.
At about 9:50 pm we were hit with another plume of the same type as the one at 9:02 pm. This one also rose quickly and peaked at intensity 9.5, which is a nightmarish intensity. It also dissipated at a medium-fast rate.
The plumes have been sprayed so close together that air intensity never subsided throughout the day, until about 9:50 when intensity finally fell to 7.5. Now, for the first time today we have breathable air.
As I type this, intensity is 7.25+, and it feels great. I don't think it will last long. This is our evening break which happens most nights about this time.
The attack on your family and everyone you love continues.
1:13 am (3/21)
At just before 12 midnight, we were hit with a very slow-rising plume of type Sharp-Metallic and Barium with Morgellon's, Inflammatory, and Mercury additives. Yes, we have the Morgellon's type at night, once again.
The intensity if this nasty plume has inclined slowly since midnight and has now reached the intense level of 9.5+. The Sharp Metallic and Mercury components are dominant. What a nightmare this is.
May God help us.
1:24 am (3/21)
The intensity of the previous plume is now 9.75.
March 19
Overnight
The intensity throughout the night was a somewhat stronger than usual with ambient intensity between 7.5+ and 8. The type profile was Model Cement and Sharp Metallic with Inflammatory and Mercury additives. The Mercury additive has been consistently strong for perhaps the past year; stronger than it has been prior to that.
This morning we were hit at about 9:30 am with a very slow-rising plume of type Sharp Metallic, Model Cement, and Chalky-Bitter-Pharma with Morgellon's, Inflammatory, and Mercury additives. Yes, we were hit with the Morgellon's additive again. Intensity rose slowly and has now reached intensity 8.5 as I type this.
Based on this mornings consistent poisoning, I presume this entire afternoon they will keep the poison in the higher ranges between 8 and 9. Let's hope they don't.
Don't be afraid to speak out on this subject because, that same people who will complain that you are talking about these things will be the same people who complain that you don't once it's common knowledge.
In short, you can't please everyone, so just do the right thing and please God.
So, the attack on all life continues on our watch.
2:02 pm
As predicted, the intensity of the air has been relatively high-ish this afternoon being between 8 and 8.5. Like yesterday during this time of the day, we have not had discrete plumes, but intensity has risen and fallen in the shape of a sine wave. So, these are likely distant plumes that have drifted to my location over time causing the plume edges to soften resulting in the sine wave shaped intensity curve.
The type profile of the poison in the air all afternoon is Model Cement and Chalky-Bitter-Pharma with Inflammatory and Mercury additives.
At about 2:30 pm we were hit with a direct hit. Plume type is Barium (remember we have incoming precipitation) and Sharp Metallic, with Inflammatory and Mercury additives. Intensity is rising at a medium fast rate and is now 8.75 and still rising. The Barium type is the dominant component.
4:09 pm
At about 3:45 pm we were hit with a full-spectrum plume of type Model Cement, Chalky-Bitter-Pharma, and Burnt Electronics/Fungal with Inflammatory and Mercury additives. Intensity is rising at a medium rate and is now 8.75 with the Burnt type being dominant.
6:12 pm
At 5:15 pm we were hit with another wide-spectrum plume of type Model Cement, Chalky-Bitter-Pharma, and Burnt Electronics/Fungal with Inflammatory and Mercury additives. Intensity peaked at 8.75 with the Burnt type being dominant.
At about 6 pm we were hit with plume of type Model Cement, Chalky-Bitter-Pharma, and Copper with Inflammatory and Mercury additives. Intensity is rising at a medium rate and is now 8.75.
7:57 pm
At roughly 7 pm we were hit with plume of type Barium, Chalky-Bitter-Pharma, and Copper with Inflammatory and Mercury additives. Intensity has risen at a medium-slow rate and is now 9.25+.
8:10 pm
The intensity of the previous plume is now at 9.75+.
10:03 pm
The previous horrific plume finally dissipated at about 8:45 pm. Air intensity dropped to to 7.25+ until 9:45 pm. It felt fantastic. I felt my inflammation dissipate. Aches and pains all over my body faded, but not completely. Nevertheless, these days it's amazing to feel amazing, even if for only a few minutes.
At 9:45 pm we were hit with another plume. Type was Model Cement, Chalky-Bitter-Pharma, and Burnt Electronics/Fungal with Inflammatory and Mercury additives. Intensity rose very quickly and hit 8.5 then dropped just as rapidly to the current intensity of 7.75.
This was clearly a partial hit. The plume hit us vertically as it was travelling horizontally. So we only got hit with the part of the plume that had not already passed us by before reaching ground level.
Knowing how they often carpet spray in parallel lines, the next plume will possible be a fully hit with maximum intensity and duration. The next may be less intense with softer edges, and so on. We'll see. These days they sometimes randomize the schedule, so although there are many repeating patterns, sometimes they change completely for a short while.
In the mean time, we're still breathing the globs poison with the passive consent of the population. Sad.
12:02 am (3/20)
We have just been hit with plume of type Barium, Chalky-Bitter-Pharma, and Burnt-Electronics/Fungal with Inflammatory and Mercury additives. Intensity is rising at a medium-fast rate and is now 7.75. So. this is our usual midnight hit.
How much longer?
12:59 am (3/20)
Right on schedule. We are now getting hit with another plume of the same type. Intensity is rising quickly and is now up to 8.25.
So, just like most nights, we got hit with 3 plumes. Usually they hit us almost exactly at 11 pm, 12 midnight, and then 1 am, but tonight the first of these 3 was at 10 am, then 12 midnight and 1 am.
Patterns, for years I have been watching all the patterns.
March 18
Overnight
After last night's crushing plume at about 11:45 pm, the remainder of the night was a slightly stronger than usual night of spraying with ambient intensity between 7.5 and 7.75+. The poison types in the air are the typical types we see day-after-day: Model Cement with Inflammatory and Mercury additives.
10:35 am
At 6:45 am we were hit with a fast-rising plume of type Model Cement and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. Intensity rose quickly peaking at 9.5- by 7:20 am. The Inflammatory component was dominant.
At about 9:15 am we were hit with another fairly-fast-rising plume of type Model Cement and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. Intensity rose quickly peaking at 9.25 by 9:35 am. The Inflammatory component was again the dominant type.
At roughly 10 am we were again with another identical type plume which is now (10:39 am) at intensity 9.5-. This plume rose a little more slowly than the previous plumes. If you look closely, you will see this morning's pattern in that each successive plume rises a little less quickly. This indicates either a higher altitude release or a release a little farther away. In this case I believe it was a little farther away. Why?
I have seen for years a spraying pattern where a jet crosses the sky. Then a little later, another jet crosses parallel to the previous jet but it's a little farther south, perhaps a mile. Then a little later, yet another jet crosses parallel to the previous 2 jets but still a little farther south.
This type of pattern is what you would expect when they are attempting to systematically blanket a wide area with their poisons - and yes, they are poisons.
So being that I am in a fixed location, when the poisons from the most local jet hits my location, it rises quickly, peaks at a high value, then drops quickly. Then the poison from the next parallel jet, which is a little farther away, rises a little less quickly, peaks a little less intensely, and drops in intensity a little more slowly. The distance this plume has to travel before reaching my stationary location is farther from the origin - the jet itself - thereby giving the plume more time to dissipate, particularly around it's edges, resulting in "softer" edges. From my stationary perspective, this results in slow intensity rise-times and fall-times, and this is exactly what I witness day-after-day, week-after-week.
So it's now 10:49 am and intensity has dropped to 8.75. This fall-time is a little slowly than the previous plume, exactly what we expect from this type of parallel carpet-bombing operation.
This afternoon has been characterized by air intensity moving up and down slowly in the shape of a sine wave. This is not uncommon.
I believe this indicates plumes hitting ground level some distance away and then drifting over us once the edges have become diffused. This results in the toxic intensity of the air slowly moving up and down in the profile of a sine wave. We have had about 4 of these plumes drift over us since the last log entry.
At about 5:30 pm we were hit with a direct plume that rose at a medium-fast rate and is now at intensity 8.75 and still rising. The type profile is the - now common - wide-spectrum combination containing the types Model Cement, Chalky-Bitter-Pharma, Burnt Electronics/Fungal with Inflammatory and Mercury additives. The Chalky type is the dominant component.
Is the Chalky type a carrier for lithium? The symptoms sure do line up. You can find more information about this type here: The Chalky Type.
6:13 pm
At about 6:05 pm we were hit with a plume of type Barium with Inflammatory and Mercury additives. The Barium type is typically sprayed before incoming precipitation. For this reason, I just checked radar and - sure enough - we have a large system headed directly for us. This system is not dense, but is it huge, and they are clearly hyper-nucleating in front of the system. This is what they always do.
It is now 6:24 pm and this plume peaked at about 6:20 pm at intensity 9.5-. In this plume, both the Barium and Mercury components are nearly equally as strong. This is normally the case when they spray the Barium type.
The current intensity of this plume is 8.75+.
That attack on all life continues.
7:16 pm
At about 6:45 pm we were hit with a plume of type Barium and Chalky-Bitter-Pharma with Morgellon's, Inflammatory, and Mercury additives. Yes, they hit us with the Morgellon's additive tonight. This has been happening in the past 2 weeks, but before that the Morgellon's additive was only used in the morning. All elements of this plume are nearly equally as strong. Intensity rose quickly and peaked at 9 at about 7:05 pm.
We can hypothesize that this plume was a direct hit because the edge resolution was high (sharp), well-defined.
Zooming out to see the big picture throughout the day; They hit us with spaced, parallel, horizontal layering producing plumes increasingly far away. Eventually, they begin the cycle again and we suffer several direct (or near direct) hits. Then again, plumes fall increasingly far away starting the pattern over again. This is likely the scenario that produced the fallout pattern we had here today.
As I type this, intensity is still high at 8.75 and decreasingly slowly.
At 7:35 pm we were hit with another plume. Type profile is Model Cement, Chalky-Bitter-Pharma, Burnt Electronics/Fungal with Inflammatory and Mercury additives. Intensity is rising quickly and it already at 9.5- and still rising. The previous plume had not completely cleared when this plume hit us. The Model Cement and Inflammatory components are dominant.
10:21 pm
The previous plume dissipated back to ambient levels (7.5) at about 8:40 pm where it remains as I type this. This likely won't last long. Between now and 11 pm is the time we normally get hit. We'll see.
Intensity 7.5 is not mild. It's just tolerable, but still exhausting, truly. So there is still a mix of poisons in the air that I can taste and/or smell. So the current type profile is Model Cement and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. The Model Cement and Inflammatory are the strongest components.
11:57 am (3/19)
Last night we were hit with 2 more plumes at 11:40 pm and 1:40 am (3/19). The type profile for both were the same: Model Cement, Chalky-Bitter-Pharma, and Sharp Metallic with Inflammatory and Mercury additives. In both plumes the Sharp Metallic and Inflammatory components were dominant.
The first plume peaked at intensity 8.5. The second plume peaked at intensity 9.25. Overall, we are experiencing the hardest, more frequent spraying schedule in hsitory.
For quite some time, we normally get hit at about 11 pm, then 12 midnight, when 1 am, but last night was different as we were hit with 2 plumes instead of 3, plumes the timing was different in that we were hit at 11:40 pm and then 1:40 am. Whatever the reason, this is what happened.
March 17
Overnight
A slightly stronger than usual night of spraying with ambient intensity between 7.5 and 7.75+. This intensity only began after the last plume of the night ended after 1:30am, which is usually the case. If you look at the log, you will see the patterns everywhere.
This is not something that comes from commercial jets. I can smell the kerosene when I'm driving near airports, which is what real jet fuel smells like (kerosene). No. This - that they are dispersing on us - is filled with something very different with unique tastes and odors, and it is released in many easily identifiable patterns (to those who are paying attention).
This is not "the unintentional side effect of jet fuel additives" as a few deceived activists claim. This is absolutely intentional.
9:02 am
At about 5:30 am we were hit with a full-spectrum plume of type Model Cement, Chalky-Bitter-Pharma, and Burnt Electronics/Fungal with Inflammatory and Mercury additives. This plume intensity rose and fell at a medium rate and peaked at 9.5- at about 6:20 am. The Inflammatory component was very strong and was dominant among the other component.
At about 8:10 am we were hit with a full-spectrum plume of type Model Cement, Chalky-Bitter-Pharma, and Burnt Electronics/Fungal with Inflammatory and Mercury additives. This plume intensity rose and fell at a medium rate and peaked at 9.25+ at about 8:50 am. The Inflammatory component was dominant among the other component.
A trend that I'm seeing now is this. Instead of blasting us with the Chalky and Burnt types in all plumes, they are now lowering the intensity of these components in most plumes. They still hit us hard with these types at certain times, but more often they are "sitting back in the mix" as a sound man would say.
Based on my research, one of the real real reasons for The Patriot Act is to monitor the population for feedback based about spray intensity. They do not want the public to discover what is being done to them, but at the same time, they need to spray as hard as possible to achieve the desired effect. Early whistle blowers revealed that they were responsible for reporting hospital attendance to a third party daily. They eventually concluded that this was directly for monitoring the effects of the spraying on the population. This was their own independent conclusion reached by two separate whistle blowers.
There is much more to this program than most people realize, in terms of logistics, control, monitoring, and feedback, this is undoubtedly the largest single military operation in human history. And make no mistake, it will eventually come out that this operation is run by the military, just as the CV operation over the past 2+ years has been revealed to be by leaked documents.
We should not be surprised to learn the Jefferson warned the people that a standing military would eventually be used against their own people. We are now there. In fact, we have been there for many years.
At about 10:10 am we were hit with another full-spectrum plume of type Model Cement, Chalky-Bitter-Pharma, Burnt Electronics/Fungal with Morgellon's, Inflammatory, and Mercury additives. Intensity rose at a medium-fast rate and is now (10:37 am) 8.75 and still rising. The Morgellon's and Inflammatory components are dominant.
12:39 pm
At roughly 12 noon we were hit another full-spectrum plume of type Model Cement, Chalky-Bitter-Pharma, Burnt Electronics/Fungal with Inflammatory, and Mercury additives. This one does not contains the Morgellon's additive. Intensity is rising at a medium rate and is now 8.75 and still rising. In this plume, the Chalky-Bitter-Pharma (Lithium?) component is dominant.
The Chalky type clearly depletes electrolytes in the body: magnesium, potassium, and sodium. This effect is most pronounced with magnesium, so much so that it may induce heart arrhythmia in some persons. This is dangerous and may potentially lead to heart attacks. In this plume, the Chalky type dominates all other types, so this is clearly not good.
Having said this, I should mention that, in all the research I have done over the years regarding health and my own health conditions that I have suffered, I have concluded that virtually all health issues that I have suffered have been induced by the actions - or inactions - of government regulators.
We all know that government regulators work for the industries they are supposed to regulate. This condition is referred to as "captured regulation" and is not uncommon historically. So, it makes sense that regulators captured by the health care industry enact policies that profit the health care industry. This means their policies make more people sick; a lot more people sick.
This is the reason, for example, that the FDA has never banned amalgam, mercury-containing dental fillings as many other large countries have. In fact, in states that offer state dental assistance, new dental fillings will ONLY BE COVERED BY THE STATE if they contain mercury. Who does this profit in the long run? Big pharma and the health care industry, of course. Who does it harm? You and your family.
Why do so many countries know about the dangers of dental amalgam - so much so that they have BANNED them, yet the U.S. continues to promote them, and in fact force those on assistance to get them? Again, it profits the same industry. This same industry happens to be owned and controlled by the same families that are pushing so hard for digital money and global government.
So, we could write a book on this subject, but suffice it to say, my health struggles have been for their profit, and it has virtually ALL been intentional. One day the entire world will know this and ask, "What was wrong with that generation that they could not see this corruption?"
Air intensity as I type this remains at 8.75. The poison is strong today, and again, who do you think this profits? And who do you think is promoting it?
We have been hit a couple times since the previous log entry. I was not able to log the exact times of the previous hits.
Currently we are being hit with a plume that landed at about 4:14 pm. This is another full-spectrum plume of type Model Cement, Chalky-Bitter-Pharma, Burnt Electronics/Fungal with Inflammatory, and Mercury additives. Intensity is rising at a medium-fast rate and is now at 8.5 and rising. The Chalky and Inflammatory components are dominant.
7:01 pm
Since the last plume, they have maintained the air between intensity 8.25 and 8.75. This is the result of layered spraying. No breaks between plumes. Just continuously toxic air for hours.
The type profile in the air is the typical full-spectrum of type Model Cement, Chalky-Bitter-Pharma, Burnt Electronics/Fungal with Inflammatory, and Mercury additives. The Inflammatory and Mercury components have been dominant, by far. Some of the other components are detectable, but have been at a much lower intensity.
The largest human operation ever mobilized is in full force. Who is the target?
8:32 pm
By about 7:20 pm intensity dropped to 7.5+. It remained at that intensity until just now.
At about 8:25 pm, intensity began to rise at a medium-fast rate. As I type this (8:36 pm), intensity is now at 8. The type profile is the same as it has been all day: Model Cement, Chalky-Bitter-Pharma, Burnt Electronics/Fungal with Inflammatory, and Mercury additives. They seem to be using this huge, awful mix more and more. The Model Cement is dominant as I type this.
Sometimes, the intensity of individual components changes in relation to each other. This is especially true of the Burnt type. I have noticed that the Burnt type usually peaks in intensity 5 to 15 minutes after the others components. It also tends to persist in the air longer.
The Burnt type is different than other types in that it's the only type that can be removed from the air using HEPA filtration. This implies that it has a larger particle size. This likely has much to do with its unique behavior.
Even as I type this, the Model Cement type is already subsiding while the Burnt type is still slowly increasing.
One day we will have all the answers. We'll know what they have sprayed us with, and we'll know how it was manufactured, transported, pumped out of the jets, and how they have kept most of those involved from speaking out.
The previous plume was clearly a partial hit because it is already declining in intensity. Even the Burnt type seems to have peaked.
I personally believe millions have already died before their time because of this historic attack against all life. The poisons manifest in hundreds of common diseases, many of which are fatal.
At about 10:15 pm the air began increasing with the same type profile they have used all day. In this plume, however, the Inflammatory additive is far dominant over the other types (except 1). Intensity rose at a medium-slow rate and is now 8.75 with the Inflammatory component dominant and the Chalky type not far behind.
I believe there is a chance that the Chalky type actually contains lithium which has very serious health implications, including life-threatening heart issues. The symptomology of the Chalky type is identical to lithium and some precipitation tests have shown lithium in the environment to be extremely high.
At about 11:45 pm we were hit again with the same type of wide-spectrum plume that we have had all night. Intensity has risen at a medium-fast rate and is now 9.25 and still rising.
12:20 am (3/18)
The intensity of the previous plume is now 9.5+. The Model Cement and Inflammatory components are dominant.
March 16
Overnight
A typical night of spraying with ambient intensity between 7.5 and 7.75.
At about 5:30 am we were hit with a plume of type Model Cement with Inflammatory and Mercury additives. The Mercury component has been strong for months, but last night it was particularly strong as morning mercury symptoms are spiking. This plume intensity rose and fell at a medium-slow rate and peaked at 8.75+ at about 6:30 am. It's now (6:49 am and intensity has fallen back to 8+.
Just got back from spending the morning in Bangor. I saw 1 (one) chemtrail (non-persistent) during the entire trip while on my way to Bangor.
Air intensity when I left my house was about 7.75-. In Bangor it was about 7.5+ everywhere I went. Arriving close to home intensity was a little higher at 7.75.
The type profile in the air was Model Cement with Inflammatory and Mercury additives. The Model Cement was - and is - the dominant component.
Now that I'm home there are still no visible plumes in the sky.
3:36 pm
At about 2:20 pm we were hit with a plume of type Model Cement, Chalky-Bitter-Pharma, and Burnt Electronics/Fungal with Inflammatory and Mercury additives. Intensity rose at a medium-fast rate and peaked at intensity 9.75+ at 3 pm. Intensity has now dropped to 8-. The Model Cement and Mercury types were the dominant components.
5:17 pm
At 4:30 pm we were hit with a plume of type Model Cement, Chalky-Bitter-Pharma, and Burnt Electronics/Fungal with Inflammatory and Mercury additives. Intensity rose at a medium-fast rate and peaked at intensity 9.75 at 4:55 pm. Intensity has now dropped to 8.25. The Model Cement and Mercury types were the dominant components.
6:28 pm
Just after 5:30 pm we were hit with a plume of type Chalky-Bitter-Pharma and Burnt Electronics/Fungal with Inflammatory and Mercury additives. Intensity rose at a medium-fast rate and peaked at intensity 9.5 at about 5:10 pm. Intensity has now dropped to 8-. The Chalky type was the dominant component.
Watching this pattern, I wonder if we will be hit at 6:30 pm
7:12 pm
Yes, it happened.
At 6:43 pm we were hit with a plume of type Chalky-Bitter-Pharma and Burnt Electronics/Fungal with Inflammatory and Mercury additives (same as the previous plume). The Chalky type was the dominant component.
At about 7:10 pm (just a few minutes ago) we were hit with a plume of type Model Cement, Chalky-Bitter-Pharma and Burnt Electronics/Fungal with Inflammatory and Mercury additives. Intensity is rising at a medium-fast rate and is now 8.25+. The Model Cement type is the dominant component.
Remember, not long ago we were almost always hit on 2-hour intervals with some breaks throughout the day. Now look at the difference. We are now hit at 2-hour, or 1-hour, or 90-minute, or sometimes only 30 minute intervals. It has never been like this before. It has never been this bad.
7:50 pm
The frequency of the plumes hitting us is unprecedented! Again this one and the previous one were only about 30 minutes apart.
At about 7:45 pm, we were hit with a plume of type Barium, Chalky-Bitter-Pharma and Burnt Electronics/Fungal with Inflammatory and Mercury additives. The Barium type is the dominant component.
8:02 pm
The intensity of the previous Barium type peaked at 8.75 just a few minutes ago.
You know how I have said for years that the Barium type almost always sprayed ahead (4 to 12 hours, sometimes more) of incoming precipitation?
Because we are getting hit hit so hard with the Barium type right now, I decided to check radar, and this is what is headed directly towards us right now:
10:21 pm
By 9 pm intensity dropped down to 7.25 which was an amazing break. When this happens, I feel fantastic, peaceful, and relaxed. To think that this is what I'm supposed to feel like all the time, but I'm not allowed.
This break lasted until just a few minutes ago. At about 10:10 pm we were hit with a slow-rising plume that has just pushed the air toxicity level back up to intensity 7.5+ where it is right now. The type profile is Model Cement, Chalky-Bitter-Pharma, and Burnt Electronics/Fungal with Morgellon's, (yes, the Morgellon's type again at night), Inflammatory and Mercury additives.
The world is very polarized right now. To people on one side of this issue, chemtrails are ridiculous. To those on the other side, chemtrails are self evident.
Why such a divide?
There are 2 values in the world. One value places self and emotion above truth. The other value places truth above self.
Those who value their emotional comfort first are easily deceived. This is why glob's-owned media constantly coerce the public to follow their heart. The globs pretend they are empowering people when in fact, they are doing just the opposite. They are taking away their power to discern thereby making it easier for the globs deceive them.
Propaganda does not work against logically-minded researchers will to sacrifice their comfort for truth.
Propaganda works wonderfully against those who want to believe it; those who are inclined to do what they want ("Do what you want is the whole of the law" as the globs say). Propaganda is emotionally appealing because truth is hard, and propaganda typically offers you a more desirable lie; an easier-to-swallow pill.
"Jet trails are harmless water vapor" is a desirable lie.
"Jet trails are intentionally-distributed toxic substances" is a hard truth.
It's time the world grew up and began facing hard truths. You don't try to heal your body by pretending you're not sick, yet that is precisely what those in denial are doing.
It's time to stop pretending. The consequences of this denial and emotional self-worship are devastating, and countless people are suffering because many continue to live in their own comfortable delusion.
It's now 11:02 pm and the intensity of the current plume is 8.5- and still rising.
The Morgellon's additive and Chalky type are the dominant components.
9:32 am (3/17) - At about 1:10 am (early morning) we were hit with a full spectrum plume type containing the Model Cement, Chalky-Bitter-Pharma, and Burnt Electronics/Fungal types with Inflammatory and Mercury additives. intensity rose quickly and peaked at 9.5+ at about 1:35 am. The Burnt and Inflammatory components were dominant.
March 15
Overnight
After another late night of poisoning us, we had an average+ night of spraying through the night. Intensity ranged from 7.5 to 7.75+. Type in the air was the typical Model Cement with Inflammatory and Mercury additives.
10:53 am
At about 8:45 am we were hit with a wide-spectrum plume consisting of these components: Model Cement, Chalky-Bitter-Pharma, Burnt Electronics/Fungal with Inflammatory and Mercury additives. Intensity rose at a medium rate and peaked at 8.5+.
At 10:48 am we were hit with another identical plume: A wide-spectrum plume of type Model Cement, Chalky-Bitter-Pharma, Burnt Electronics/Fungal with Inflammatory and Mercury additives. Intensity is rising quickly and has already reached intensity 9 as I type this (10:55 am).
The attack on all life continues.
12:32 pm
The previous plume peaked at intensity 9 and has now dissipated to 8.
Interestingly, we did not have a 12 noon plume today, nor did we have a 12 midnight plume last night.
...for what it's worth.
1:17 pm
At about 1 pm we were hit with a plume of type Model Cement, Chalky-Bitter-Pharma, Burnt Electronics/Fungal with Inflammatory and Mercury additives. This is, once again, the wide-spectrum combination plume that they have been using very often lately. It is a horrible mixture causing symptoms in some people. This poison is undoubtedly causing damage to everyone's bodies. Intensity is rising at a medium rate and is now at 8.75+.
1:42 pm
The intensity of the previous plume peaked at intensity 9.5 at 1:35 pm and is now declining at a medium rate.
3:52 pm
At about 3:40 pm we were hit with another wide-spectrum plume of type Model Cement, Chalky-Bitter-Pharma, Burnt Electronics/Fungal with Inflammatory and Mercury additives. Intensity is rising at a medium rate and is now at 8.5.
5:35 pm
At about 5:14 pm we were hit with another wide-spectrum plume of type Model Cement, Chalky-Bitter-Pharma, Burnt Electronics/Fungal with Inflammatory and Mercury additives. Intensity is rising at a medium rate and is now at 8.75-.
6:50 pm
At about 6:40 pm we were hit with another wide-spectrum plume of type Model Cement, Chalky-Bitter-Pharma, Burnt Electronics/Fungal with Inflammatory and Mercury additives. Intensity is 8.5 and rising at a medium-fast rate.
7:59 pm
We are just now getting hit with a wide-spectrum plume of type Model Cement, Sharp Metallic, Chalky-Bitter-Pharma, Burnt Electronics/Fungal with Inflammatory and Mercury additives. Intensity of the air is 8.25 and rising at a medium rate.
The previous plume had not yet fully cleared (back to ambient levels) when this plume hit us.
The assault on all life continues.
8:21 pm
The intensity of the previous plume is now 9-.
10:41 pm
The previous plume finally dissipated by about 9:15 pm back t near ambient levels of 7.5+. Since that time, air intensity has been hovering between 7.5- and 7.5+. This is the only real break we have had all day. It has been a brutal day of poisoning. The taste and smell have been horrid.
What more can be said. I'm here, writing all these words, hoping some day someone with the right level of power and authority will be moved to put an end to this attack on all life. As if the crime against humanity we have read in the textbooks aren't enough, this crime surpasses them all by orders of magnitude, and yet the population ignores it all while being quick to complain about the apathetic populations of history.
What a bizarre time we live in.
12:25 am (3/16)
Well, this was quite a long break. Not until about 12:15 am (10 minutes ago) were we hit with another plume.
This plume is of another full spectrum plume with the Morgellon's additives. This will be the third night in a row that the Morgellon's additive has been used against us at night. As I have mentioned previously, historically, this additive has only been used in the am.
So this plume type is Model Cement, Chalky-Bitter-Pharma, Burnt Electronics/Fungal with Morgellon's, Inflammatory, and Mercury additives. What an unbelievable mix this is.
Intensity is already 9 and rising quickly.
There are truly no words to express the irony in the fact that this can happen in a day when the truth is still relatively accessible from nearly any computer. Yes, they have made it harder to get to, but it is still available.
12:35 am (3/16)
The previous plume intensity has reached 8.25+ and is still rising.
March 14
Overnight
An average night of spraying. Intensity ranged from 7.5- to 7.75-. Type in the air was the typical Model Cement with Inflammatory and Mercury additives.
11:22 am
We have been hit with a couple plumes already this morning. We have a winter storm coming in so I expect some temporary pattern changes.
Plume hit times were: Just before 6 am, then again at roughly 9:40 am. There were likely more while I was sleeping. The type of these 2 plumes was Model Cement with Inflammatory and Mercury additives.
I once again have to mention the ominous absence of the HAARP Hum. It used to be on daily and was very loud; easily audible. Now I've only heard it a couple time in the past few months and it was very quiet.
12:06 pm
Here we go... Right on schedule. We have just been hit with our daily noon hit. Type is another "full-spectrum" combination of Model Cement, Chalky-Bitter-Pharma, and Burnt Electronics/Fungal with Inflammatory and Mercury additives. Intensity is now 8 and rising at a medium-fast rate.
12:46 pm
About 10 minutes ago we were hit with a plume of type Barium with Inflammatory and Mercury additives. Intensity is rising at a medium rate and is now 8.5+ and still rising.
This is why I often say that, all evidence shows that there are 2 individual programs going on. The program using the Barium type does not spray according to a schedule as the other types do. This program is temporally associated with weather events. This Barium type plume is completely expected because we have an incoming storm, and they nearly always spray the Barium type ahead of storms/precipitation.
1:24 pm
At about 1:15 pm we were hit with a plume of type Model Cement, Chalky-Bitter-Pharma, and Burnt Electronics/Fungal with Inflammatory and Mercury additives. Intensity is rising at a medium-fast rate and is now at 8.75-. The Model Cement type is the dominant component.
3:49 pm
The previous plume dissipated by about 2:15 pm and air intensity returned to "ambient" levels of 7.5 (it should be zero and would be without spraying).
At about 3:45 pm we were hit with another "full-spectrum" plume of type Model Cement, Chalky-Bitter-Pharma, and Burnt Electronics/Fungal with Inflammatory and Mercury additives. Intensity is now already at 8.75- and rising quickly.
At about 4:35 pm we were hit with another "full-spectrum" plume of type Model Cement, Chalky-Bitter-Pharma, and Burnt Electronics/Fungal with Inflammatory and Mercury additives. Intensity is now at 8.25 and rising quickly.
5:44 pm
The previous plume peaked at intensity 8.75.
At about 5:35 pm we were hit with another "full-spectrum" plume of type Model Cement, Chalky-Bitter-Pharma, and Burnt Electronics/Fungal with Inflammatory and Mercury additives. Intensity is now at 8.25- and rising at a medium-fast rate.
6:23 pm
The intensity of the previous plume is now 9+.
7:59 pm
At about 7:15 pm we were hit with another "full-spectrum" plume of type Model Cement, Chalky-Bitter-Pharma, and Burnt Electronics/Fungal with Inflammatory and Mercury additives. Intensity peaked at 9.25 and is now 8.75. The Model Cement type was the dominant component.
9:01 pm
At about 8:40 pm we were hit with a plume of type Barium with Inflammatory and Mercury additives. Intensity rose quickly and peaked at 8:55 pm and is now 8.5 and falling. The Barium type was the dominant component.
10:06 pm
At about 9:55 pm we were hit with a plume of type of type Sharp Metallic, Chalky-Bitter-Pharma, and Burnt Electronics/Fungal with Inflammatory and Mercury additives. Intensity is rising at a medium rate and is now 8.25-.
They have been using the Sharp Metallic more often in the past couple months.
The attack on all life continues.
10:46 pm
Well this is interesting.
We are now getting hit with another plume with this type profile: Sharp Metallic with Morgellon's, Inflammatory, and Mercury additives. The Morgellon's type has historically only been sprayed in the morning. Last night it was included in the mix late at night. So this is an interesting change.
I wonder what type of metal the Sharp Metallic type contains.
1:20 am (3/15)
At about 1:10 am we were hit with a plume of type of type Model Cement, Chalky-Bitter-Pharma, and Burnt Electronics/Fungal with Inflammatory and Mercury additives. Intensity is rising at a medium rate and is now 8.5-.
We didn't get hit with the usual 12 midnight plume.
March 13
Overnight
Continuing from last night's log entry, intensity finally fell off later in the night to near ambient levels (7.5+). The Mercury and Inflammatory additives dominated the night. In fact, they have been using these additives harder and stronger for weeks now (in relation to the other components) during the night leading to a host of chronic-mercury symptoms that I am very familiar with. See My Mercury Story
Here is what mercury does to you emotionally: The Emotional Effects of Mercury. This works out very well for the globs in keeps the population in fear, because essentially, mercury is "The Fear Drug". Besides causing over 200 of the most common diseases today (according to researcher Dr. Huggins), mercury profoundly affects emotions.
8:59 am
Just after 7 am we were hit with a slow-rising plume that gradually brought air intensity back up to the current (9 am) level of 8.5+ (which is quite horrible). Intensity continues to climb. The type profile is again wide-spectrum: Model Cement, Chalky-Bitter-Pharma, Burnt Electronics/Fungal with Inflammatory and Mercury additives. The Inflammatory and Mercury additives continue to dominate the air as I type this.
If you have been following this log you know that they have really be concentrating the Inflammatory and Mercury plumes overall, even during the day on most days. This is a new pattern that has emerged in just the past few months.
They are raising overall average intensity whereas they used to spray plumes 2-hours apart. This used to give us a little break in-between plumes to catch our breath. No longer. Most days, most of the time, the air is now continuously bad for many hours at a time without any breaks.
Why would they do this?
To keep it short, people have been recognizing the pattern. Even those who don't smell and taste the toxins in the air (as I do) saw that every 2-hours their health symptoms would flare up. This is bad for those committing this crime. They don't want the public to discover how their health is being affected (decimated actually) by the poisons they are releasing. So their logical response is to upgrade their logistics to increase the frequency of plume-releases while slightly decreasing individual plume intensity.
The increased frequency of releases removes the "breaks" (when intensity falls back to "ambient" levels) between plumes.
The result is a continuous intoxication of the population without any patterns that can be recognized by the public. The 2-hour symptomatic surges are now gone. So now the majority of the general public, who cannot smell or taste these poisons in the air, will not have periodic surges of their health symptoms which removes the element of artificiality.
This continuous, short-interval (high-frequency) release pattern is what I call "layering".
So the attack on all life continues while much of the population still believes jet trails are "harmless contrails". I have vocalized my observations on this subject here: Global Skywatch Exposes the Contrail Myth
Pilots have called me thanking me for speaking out on this subject. Every one of these pilots told me that they had never seen jet trails historically before this entire debacle began. They were all older persons who had been flying commercial and/or carrier (UPS, et. al.) jets for decades. They are old enough to know that this phenomenon did not exist historically despite the fact that big media continues to claim that it did.
This has been a horrible day of spraying, as expected. The only milder spell we had was just after 11 am. Intensity began to fall and reached 7.75-. In about an hour, just after 12 noon, intensity rose back up again and has at that level ever since.
They are layering the air so there are no discrete plumes for long periods of time. Intensity simply hovers between 8.5 and 8.75. The type profile in the air is Model Cement, Barium (because we have incoming precipitation), Chalky-Bitter-Pharma, Burnt Electronics/Fungal with Inflammatory and Mercury additives. The dominant components are the Inflammatory additive and the Barium type, which I could have predicted based on recent history.
Although we often do not have discrete plumes for long periods of time, we still are hit with discrete plumes (just to be clearly about my post above). And what just happened is a perfect example.
Intensity was hovering around 8.5+ but at about 1:18 pm we were hit with a discrete plume. This one has a very powerful Model Cement type with the usual Inflammatory and Mercury additives. Intensity is rising quickly and is already at 9-.
Before this plume hit, the Model Cement type was not dominant but was much lower than the other components. In this plume, the Model Cement type is far dominant. The odor that builds up in my wet mask from this plume, in the period of 10 minutes, is so strong that it literally smell as if I have my nose directly over a tube of model cement, which smells a lot like finger nail polish.
They clearly remove the scent-causing compound from these chemicals, but the scent is not completely removed, and as the material is caught by my wet mask, the odor quickly increases until I have to change the washcloth with a new, clean one.
We were just hit with a plume containing the Burnt Electronics/Fungal type.
Is this a slower-descending component of the previous plume, or is this a separate plume al together? We don't know, but one day we will know all about what they are doing.
The Burnt component that just hit us rose quickly to intensity 8.75-.
4:55 pm
The previous plume dissipated at about 2:45 pm with the air returned to ambient levels of 7.5+.
Air intensity remained at that level until 4:48 pm when we were hit with the current Plume. Type profile is full-spectrum with Model Cement, Chalky-Bitter-Pharma (Lithium?), and Burnt Electronics/Fungal with Inflammatory and Mercury additives. Not surprisingly, the Inflammatory and Model Cement components are dominant. Current intensity is 9.25- and still rising at a fast rate.
The attack on all life continues.
5:07 pm
The intensity of the previous plume is now 9.5-.
5:34 pm
The intensity of the previous plume is now 9.75+ (of 10).
6:23 pm
The intensity of the previous plume has reached 10 and has been at 10 for the past 30+ minutes.
Why do you suppose they are trying to induce so much inflammation in the population? For most people, this type makes them tired and/or sleepy. For others it can induce tremendous inflammation which could be dangerous and even fatal.
7:01 pm
The intensity of the previous plume is still at intensity 10 (of 10). No words.
7:29 pm
The intensity of the previous plume is still at intensity 10 (of 10).
The Inflammatory additive has been - and continues to be - the dominant component since this plume hit us.
8:29 pm
It wasn't until about 7:45 pm that the previous plume began to subside. It happened slowly but the air is not at ambient levels now because we've been hit by another plume in the mean time.
At about 8 pm we were hit with a new plume before the previous one completely subsided. The type that we are breathing now is another full-spectrum poison containing the Model Cement, Chalky-Bitter-Pharma, and Burnt Electronics/Fungal types with the Inflammatory and Mercury additives. Intensity rose at a medium-fast rate and is now back up to 9.5-. The dominant components are the Inflammatory additive and the Chalky type; the 2 worst types.
One of the most frightening things about being spraying is this.
It helps you to realize how bad things will have to become before much of the population will lift a finger to do anything. Not just to do anything, but before they will even be willing to learn about what is being done to all of us. They just - don't - want - to - know... and this level of denial is stunning.
This is the reason this world is in so much trouble. This is the reason we are on the brink of such historic suffering. ...And to think that none of this had to be this way.
As someone who has suffered much in my life, I know the value of being responsible and involved.
We can spend our lives living out 1 of 2 values. Either you do what you want, or you do what is right. The two are often-or-usually mutually exclusive.
Responsibility. Accountability.
Love. Truth.
Love brings responsibility. Truth brings accountability.
With both, you have peace and safety... a powerful combination.
Oh what a place the world could have been, if only...
10:08 pm
At about 9:10 pm we were hit with a plume of the same wide-spectrum type: Model Cement, Chalky-Bitter-Pharma, and Burnt Electronics/Fungal with Inflammatory and Mercury additives. The 2 dominant components are the Chalky type and the Inflammatory additive. Intensity peaked at 8.75 and is now declining. Will we get a change to breath?
What a time we live in.
11:24 pm
They are layering again.
Since the previous plume rose to 8.75, it declined very little to 8.5+ and has remained there ever since. The Inflammatory additive is dominant. The Chalky type is not far behind.
Chemtrails cause disease. Inflammation leads to many diseases.
12:07 am (3/14)
The previous plum intensity finally began to dissipate at about 11:50 pm. Intensity has now (finally) fallen to 8. The Inflammatory additive is still dominant.
I wonder if we will have a 1 am hit tonight.
1:03 am (3/14)
In my last post I asked if we will get a 1 am hit. The answer is "yes". We got a 1 am hit.
More precisely the time was 12:54 pm when we were hit. The type is the typical Model Cement with Inflammatory and Mercury additives. As expected, the Inflammatory additive is the dominant type, by far. Intensity rose quickly and is already at 8.75 right now.
No words. Just patiently waiting for the public to wake up.
Addendum: I forgot to mention that the 1:03 am plume contained the Morgellon's additive, which was fairly strong in the mix. This is very unusual because this is usually only used every 4 to 8 weeks for a stretch of a few day, and then only in the mornings between about 7 am onward. To have this one used at 1 am is very unusual.
March 12
Overnight
A milder than usual night of spraying. Intensity ranged from 7.25 to 7.5+ throughout the night. I'm grateful for nights like this when we have them, although every night should be like this - better than this actually; not with 7.25 intensity but with ZERO intensity.
3:08 pm
First, let me mention that we did not have any morning plumes. This rarely happens. Air intensity throughout the morning was 7.5- and steady. This is far, far different than most mornings that have plumes hitting us at 5 am, then 7 am, then 9 am, then 12 noon, etc., etc.
We have, however, been hit with 2 plumes so far.
At ~11:55 am we were hit with a plume of type Model Cement with Inflammatory and Mercury additives. Intensity rose to 8.25- and then slowly dissipated. The Model Cement type was dominant.
At just before 1 pm we were hit with a plume of type Model Cement and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. Intensity rose to 8.5+ and then slowly subsided. The Model Cement type was the dominant component.
Air intensity as I type this is 7.75+ and seems to be falling slowly.
There should no plumes in the air... zero... none whatsoever.
We are witnessing - actually experiencing - suffering through - the largest and most devastating crime against humanity in human history.
When will the disease and suffering be enough? It does not have to be this way.
Just a little gem I hope you will share...
5:29 pm
At just before 3 pm we were hit with a wide-spectrum plume of type Model Cement, Copper, and Chalky-Bitter-Pharma with TYPE II (flu) Biologics, Inflammatory and Mercury additives. Intensity peaked at 8.5+.
At 4:20 pm we were hit with a plume of type Model Cement, Chalky-Bitter-Pharma, and Burnt Electronics/Fungal with TYPE II (flu) Biologics, Inflammatory and Mercury additives. Intensity peaked at 8.75-.
At ~5:20 pm we were hit with a plume of type Model Cement, Chalky-Bitter-Pharma, and Burnt Electronics/Fungal with TYPE II (flu) Biologics, Inflammatory and Mercury additives. Intensity is now 8.25+ and rising at a medium rate.
6:57 pm
At ~6 pm we were hit with a plume of type Model Cement, Chalky-Bitter-Pharma, and Burnt Electronics/Fungal with Inflammatory and Mercury additives. Intensity peaked at 8.5- is now 8 and falling at a medium rate..
8:02 pm
We have had 2 plumes since the previous one.
Just after 7 pm we were hit with a full-spectrum plume of type Model Cement, Chalky-Bitter-Pharma, and Burnt Electronics/Fungal with Inflammatory and Mercury additives. Intensity peaked at 8.25. Intensity barely dropped to 8.25- until the next plume hit. They are likely layering.
Just before 8 pm we were hit with yet another full-spectrum plume of type Model Cement, Chalky-Bitter-Pharma, and Burnt Electronics/Fungal with Inflammatory and Mercury additives. Intensity is increasing at a medium-fast rate and is now up to 8.75-.
Do you see the frequency of spraying? They hit us nearly every hour near the top of the hour.
The taste of the air is absolutely disgusting and makes us both feel really bad in many ways. I have documented all the trail types and the symptoms they produce here: https://gsw.bz/types
What a world we now live in. This is happening on our watch.
9:42 pm
Since the past plume hit us, the air has continued to be horrible. Intensity has been consistently at 8.5+ until the past few minutes when it began to drop. They are clearly utilizing layered spraying to keep the intensity up like this.
The type profile has not changed during this time. The type profile is Model Cement, Chalky-Bitter-Pharma, and Burnt Electronics/Fungal with Inflammatory and Mercury additives. The Inflammatory additive has been the dominant component, as is usually is in the evening. At about 9:30 pm intensity began to drop a little, so the current intensity is now 8-.
8:49 am (3/13)
Regarding air quality after the last post last night...
Before 12 midnight, air toxicity intensity continued oscillating between 8- and 8.5.
At about 12:10 am this morning (3/13) intensity finally began to fall off rapidly. By 12:30 am (3/13) intensity had dropped to 7.5+ after hours of intensely disgusting toxic and all the related symptoms.
At about 1:20 am (3/13) we were hit with another plume that drove intensity back up to 8.5+. Intensity took hours to fall back never reaching ambient levels (7.5). The Inflammatory and Mercury additives dominated the night, but intensity finally fell to somewhat-above ambient levels later in the night.
Why are they working so hard to keep toxic intensity high continuously?
March 11
Overnight
After last night's toxic assault on our air (which was horrible), the night was a typical night with toxic intensity between 7.25 and 7.75 throughout the night (based on the times I was awake). The type profile in the air was the typical Model Cement (toluene? - which damages the kidneys, liver, and more), with the Inflammatory and Mercury additives. For many months the Mercury additive has been very strong throughout nearly every night. The same is true for the Inflammatory additive. Nevertheless, a typical night of spraying.
10:22 am
At 7:50 am we were hit with a very strong plume of type Model Cement (toluene?) with Inflammatory and Mercury additives. Intensity rose quickly to 9. Intensity has been at that level every since.
Normally (since 2005), plumes rise in intensity and then dissipate quickly, usually within. In the past months however, they have been spraying us with plumes that then remain high in intensity without dissipating.
How do they do this? It's a process that I call "layering" or "layered releases".
This simply means that they release several plumes in rapid succession to keep the toxic intensity high in the air. By "rapid", I mean perhaps 10 to 15 minutes apart, so the new toxic plumes hits ground level before the previous toxic plume has time to dissipate. This process keeps the toxic intensity high and most certainly increases damage to the body.
Not only have they begun layering our area daily in recent history, but the successive plumes contain additional components, which brings us to our second major even this morning.
At just after 10 am, 2 new components were added to the already toxic mix in the air. The previous plume did not dissipate because of layered releases, but this new plume added new components to the air.
The new components were the Chalky-Bitter-Pharma and Burnt Electronics/Fungal types. Keep in mind that the previous components had not dissipated when these new components were added.
So now, as I type this, I am breathing, tasting, and/or smelling this very toxic, nauseating mix of toxic types in the air:
Model Cement - This smells like toluene. Easy to detect when using a wet mask with peppermint oil to capture the petroleum component. This may be a delivery agent for mercury. A _histle _lower years ago said that they were using petroleum-based chemicals as a carrier for exotic metals. He didn't specifically name mercury, but this type is nearly always associated with mercury symptoms, so this makes sense with my observations.
Chalky-Bitter-Pharma - This likely is (or at least contains) lithium which displaces critical electrolytes in the body, including magnesium, potassium, and sodium. It does it so rapidly that it can induce heart arrhythmia and I'm sure much worse in sensitive persons. Lithium also induces nausea, tremors (shaking), vertigo, cold hands and feet, and damages the kidneys over time. The symptomatic match of lithium toxicity is stunningly similar to Raynaud's disease.
Burnt Electronics/Fungal - This is the newest type and is one of the few plume types that has more odor than taste. This type can be removed with HEPA filtration whereas none of the other types can. This indicates that the particulate size of this toxin is 0.3 microns or larger whereas the other types are less than 0.3 microns, likely quite a bit smaller so they cannot be removed with HEPA filtration.
Inflammatory and Mercury additives - These 2 components are so common that I classified them as "additives" because they nearly always occur with every plume type, and they nearly always occur together. Although the intensity of these additive varies throughout the day, they still occur at the same time. Mercury is extremely inflammatory. When in vapor form, it causes lung inflammation mimicking the symptoms of asthma. Studies actually say that mercury causes asthma.
Is this why asthma is now the #1 childhood disease today?
The |_inks at the top of this log page |_inks to webpages with all the details on the different types they have used against us over the years. There are a number of different types that were used for some time and then phased out. A few types were used only for a few months. When large segments of the population began to smell them, they were quickly stopped. This includes the sulfur type and the insecticide type which are no longer used, at least not that I have detected in my travels from Maine to Florida over the course of the past decade.
And so it continues. As I type this, we have this "broad-spectrum" of toxic |\|ano _articles in the air, which are much more toxic then normal particles because they have a dramatically larger surface area per unit making them much more reactive thereby causing much more damage to the body at a lower material cost. Of course, the public is financing this entire operation, so they're likely not too worried about the cost. Mantra national financial reports a U.S. government line-item entitled "Aircraft Services" that, in the early 2010's, cost taxpayers over $1.2 billion ANNUALLY.
Wake up world. This is happening.
2:09 pm
At 2:01 pm we were hit with a strong, fast-rising, full-spectrum (of poisons) plume of type Model Cement, Chalky-Bitter-Pharma (Lithium?), and Burnt Electronics/Fungal with Inflammatory and Mercury additives. Intensity has risen quickly and is already at 9.25+ and still rising. The Model Cement type is the dominant component with the Chalky type not far behind.
3:05 pm
Right on queue. Only 60 minutes later and they are poisoning us again.
A couple minutes ago we were hit with another full-spectrum-poison plume of type Model Cement, Chalky-Bitter-Pharma, and Burnt Electronic/Fungal with Inflammatory and Mercury additives. In this plume all the components are there but the Inflammatory additive is dominant whereas in the previous plume the Model Cement type was dominant. Intensity is rising at a medium rate and is now 8.25.
6:03 pm
We have been hit with 2 plumes since the last log entry, each about an hour apart.
At about 4:50 pm we were hit with a plume of type Barium and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. Intensity rose at a medium rate to 8.75 and then dissipated over the next hour.
At about 5:55 pm we were hit with a strong, fast-rising, full-spectrum plume of type Model Cement, Chalky-Bitter-Pharma (Lithium?), and Burnt Electronics/Fungal with Inflammatory and Mercury additives. Intensity is rising quickly and is already at 9 and still rising. The Model Cement type is the dominant component with the Chalky type close behind.
Today was one of those artificially-hazy days with the sun only partially visible most of the day. The make the sky overcast nearly every day now. We seldom have a truly sunny, although I have noticed that Saturdays are much more often clear or semi-clear (like today) than any other day of the week.
All it takes to lose your country is nothing. Only a motivated, proactive, impassioned population has any chance.
How the world really works..
6:56 pm
At about 6:50 pm we were hit with a plume of type Barium and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. Intensity is rising at a medium-fast rate and is now 8.25. The Barium type is the dominant component.
You see? They are now often hitting us every single hour. It has never been this frequent, or this consistently intense.
7:07 pm
A few minutes ago the Sharp Metallic type began "peeking through" the toxic mix that we are now under. This happens fairly often now and may be a result of rapid layered spraying. Nevertheless, the Sharp Metallic component has risen quickly and is now at intensity 8.75-. This has surpassed the intensity of the other components of the previous plume which are now at 8.5+.
One day, hopefully soon, the enormity and impact of this taxpayer-funded devastation will be common knowledge. At that time people will wonder with amazement how the population largely decided to ignore it.
8:40 pm
The previous plume dissipated by about 8 pm and we had a little "break" which we often get in the evening.
However, a few minutes ago we were hit with a fast-rising plume of type Model Cement with Inflammatory and Mercury additives. Intensity is already at 8.5 and rising.
10:23 pm
The previous plume did not fully dissipate when the next plume hit us.
A little before 10 pm we were hit with a plume containing only the Inflammatory and Mercury additives. The intensity rose at a medium-fast rate and is now at intensity 9.5-.
There have been a few times in the past weeks that they have used only these 2 components.
11:42 pm
The previous plume, containing only the Inflammatory and Mercury additives, only began to dissipate in the past few minutes.
At about 10:40 pm we were hit with another plume. Type profile is Model Cement and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. Intensity is rising quickly and is now already 8.25. The Model Cement type and Inflammatory additive are the dominant components.
Although part of the spraying is about weather, this hourly spraying of these horrible toxins have nothing to do weather. What do you think they related to?
12:17 am (3/12)
Right on schedule. Well actually, a few minutes late. They hit us near midnight nearly every night.
At about 12:10 am (3/12) they hit us with a wide-spectrum plume of type Model Cement, Chalky-Bitter-Pharma, and Burnt Electronic/Fungal with Inflammatory and Mercury additives. Intensity is rising at a medium-fast rate and is already at 8.5. All components are strong, but the Inflammatory additive is dominant.
The attack on all life continues.
12:55 am (3/12)
Again, right on schedule. They hit us at about 11 pm, 12 m, and 1 am most nights.
At 12:50 am (3/12) they hit us with another wide-spectrum plume of type Model Cement, Chalky-Bitter-Pharma, and Burnt Electronic/Fungal with Inflammatory and Mercury additives. The previous plume has not fully dissipated when this plume hit us. Intensity is rising at a medium rate and is now at 8.75-. All components are strong, but the Inflammatory additive is again dominant.
March 10
Overnight
A typical night. Looking at last night's log, we were being poisoned well past 2 am this morning heavily. The remainder of the night was typical with intentional toxic levels between 7.5- and 7.75- throughout the night
11:17 am
We were hit this morning at 9:20 am with a plume of type Model Cement, Chalky-Bitter-Pharma, and Burnt Electronics/Fungal with Inflammatory and Mercury additives. Intensity rose at a medium-slow rate reaching intensity 8.5 by 10 am and climbing to intensity 9 by 10:30 am. As I type this, Intensity has risen to 9.25+.
This, folks, is what I call layered releases (or spraying). We often do not have discrete (single) plumes. Instead, they spray with a higher frequency slowly raising the overall intensity over a period of time and maintaining that level for hours, or through entire afternoons or even complete days. Layering is not new, but the fact that they are doing it daily is new. A year ago this was an occasional event. Now it is daily.
This kind of continuous toxic exposure increases the rate at which disease occurs, and this is clearly the goal. You don't spray populations with mercury (extremely toxic to every body system, lead, arsenic, cadmium, aluminum, barium, strontium to benefit the public. No! These metals cause disease that eventually end lives after long battles with disease. Long battles with diseases are profitable for big medicine. It is devastating for you and your family. There is no way around this.
Why do I keep saying, "The attack on all life continues"?
For those who keep ignoring this - maybe because you can't smell or taste it and you don't yet have strong symptoms from it yet - remember this: You will. People you know and love are already affected. Some are no longer with us. Without the past 25 years of intentional poisoning, they may have lived 20 or 40 more years. This is what chronic toxic exposure does, and because the battle with diseases from such exposure usually lasts years, it is very profitable for big medicine.
At 12 n we were hit with a plume of type Model Cement, Chalky-Bitter-Pharma, and Burnt Electronics/Fungal with Inflammatory and Mercury additives. Intensity rose at a medium rate peaking at intensity 8.5+. This happened before the previous plume had subsided much.
At just before 1 pm intensity had dropped back to "ambient" levels of 7.75+ where it remains as I type this.
2:08 pm
At about 2 pm (a few minutes ago) we were hit with another full-spectrum toxic plume of type Model Cement, Chalky-Bitter-Pharma, and Burnt Electronics/Fungal with Inflammatory and Mercury additives. Intensity is rising at a medium rate and is now at intensity 8.5-.
4:41 pm
They are really hitting us hard again today... no surprise.
Just after 3 pm they hit us with a plume of type Model Cement, Chalky-Bitter-Pharma, and Burnt Electronics/Fungal with Inflammatory and Mercury additives. Intensity rose at a medium rate and peaked at intensity 9 at about 3:40 pm.
At 4 pm they hit us with a plume of type Barium, Chalky-Bitter-Pharma, and Burnt Electronics/Fungal with Inflammatory and Mercury additives. Intensity rose at a medium-fast rate and peaked at intensity 9.25 at about 4:25 pm.
The previous plume fell quickly back to intensity 8.5- after it peaked. Then at 4:38 pm they hit us with another full-spectrum plume of type Model Cement, Chalky-Bitter-Pharma, and Burnt Electronics/Fungal with Inflammatory and Mercury additives. Intensity is rising at a fast rate and is now back up to 8.75. The Chalky type is especially strong in this plume.
All of these plumes are inducing many health-related symptoms, but all of them produce symptoms of mercury toxicity in addition to the other symptoms.
The attack on all life continues every house or less. This is so bad here.
6:17 pm
At about 5:40 pm they hit us with a broad-spectrum plume of type Barium, Chalky-Bitter-Pharma, and Burnt Electronics/Fungal with Inflammatory and Mercury additives. Intensity rose at a medium rate and peaked at intensity 9.25 at about 6:05 pm.
6:53 pm
The intensity of the previous plume is now at 9.5.
I wonder just how many nauseas nights and days Laura and I must endure of this nightmarish poisoning until Americans - and everyone around the world - wakes up to what is happening. The air is truly horrendous and has been all day.
8:55 pm
At about 8:15 pm we were hit with a plume of type Chalky-Bitter-Pharma with Inflammatory and Mercury additives. Intensity rose very quickly to 8.5- and then fell just as quickly. This likely means this plume fell vertically directly on us when it was already partly passed. This is probably the reason it didn't last very long. The Chalky type was the dominant component.
I think there is a reasonable chance that the Chalky-Bitter-Pharma type is (or contains) lithium which competes with magnesium, potassium, and sodium in the body. This can induce symptoms that affect the heart and all other body systems that suffer from depleted magnesium.
In fact, the energy molecule for each cell in your body - ATP - requires magnesium to be produced. Large doses of lithium can kill you because your electrolytes are required for heart beat. When they are out of balance, you can have heart arrhythmias leading to death.
In short, lithium, in larges doses is lethal.
We should ask, why then is lithium showing up in huge doses in dew-collection water tests?
9:25 pm
Well, that didn't take long.
At 9:15 pm we were hit with another plume identical to the last plume. The Chalky-Bitter-Pharma type is very strong and rose very quickly. It's only been 10 minutes and intensity is already up to intensity 9 and still rising.
God help us.
1:27 am (3/11)
At about 12:10 am (3/11/) we were hit with a plume of type Model Cement and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. Intensity rose slowly and reached intensity 8.5+ by about 12:55 am. Intensity is now decreasing slowly. The Chalky type is the dominant component.
March 9
Overnight
Another typical+ night of poisoning, with a twist this morning.
After the intense spraying past midnight last night (which is the norm now), intensity ranged between 7.5+ and 8+ throughout the night. Type profile was the usual Model Cement with Inflammatory and Mercury additives.
9:32 am
At about 6 am (roughly) this morning, we were hit with a powerful plume of type Model Cement with Inflammatory and Mercury additives. Intensity push all the way up to 9.75 (of 10) with the Inflammatory additive being the dominant component.
It's now 9:34 am and the air stands at intensity 8+. The type profile is Model Cement with TYPE II (flu) Biologics, Inflammatory, and Mercury additives. The Biologic additive is the dominant component. This makes sense as we are getting a little snow today so those who get wick will "blame it on the weather".
The attack on all life continues.
8:46 pm
The logging below was done live, on the road today while traveling.
Logged While Traveling
The Biologics continued into the late morning and into the afternoon.
At about 12 n while driving into Bangor, the biologics jumped suddenly and dramatically from 8 to 8.75+. I make this point intentionally to show that these dropped plumes are just that; they are plumes. They travel through the air like smoke. If a toxic release is from a low-altitude, the edge of the plume will be "sharp" and well-defined, like it was here.
Have you ever been driving and got a headache for no apparent reason? You may have driven into a plume.
This is exactly how it works. Laura, who often does errands in Bangor, tells me that, on the way home, as she approaches the area where the air is usually much stronger (near my house), she begins feeling bad; headache, nausea, fatigue, tiredness, body aches/pains, etc. She does not smell or taste the trails except occasionally when they are exceptionally strong. Yet, she feels the symptoms of the poison in the air. In fact, this is true of almost everyone I spend time with locally. They do not smell or taste the plumes in the air, yet they all began feeling "off" with one symptom or another at the same time which, when I'm around them, taste and smell the increase in intensity just before the symptoms set it for everyone.
Coincidence? No. Cause and effect. Simple poisoning resulting in health symptoms.
While headed south on I95 the Biologics continued at the same intensity along with all the other components mentioned above.
The plume, along with the Biologics additive, continued past Wateville, about 1 hour away.
About 30 minutes later, entering I-295, the full-spectrum toxic plume with Biologics continued at intensity 8.5.
2:20 pm
Now in Cumberland. The Model Cement type and Chalky-Bitter-Pharma with Inflammatory and Mercury additives have declined a little to intensity 8. The Biologics additive has slowly faded as we entered Cumberland.
At about 3 pm while still in Cumberland we were hit with a plume of type Model Cement, Chalky-Bitter-Pharma, and Burnt Electronics/Fungal with Inflammatory and Mercury additives. This plume jacked the intensity up to 8.5 where it remained until we left.
6:33 pm
At about 4:30 pm we headed south to Portland. Air intensity was a little less intense than Cumberland at 8.25.
We returned to Cumberland and spent about an hour there. During that time air intensity increased from 8.25 to 9. The type profile was exactly the same: Model Cement, Chalky-Bitter-Pharma, and Burnt-Electronics/Fungi with Inflammatory and Mercury additives. The Chalky type was the dominant component.
6:40 pm
We are now headed home on I-295 N. Intensity has dropped somewhat here north of Cumberland to intensity 8.5- with the same type profile as above.
6:59 pm
We're 15 minutes south of Waterville headed north. Intensity has climbed somewhat and is back up to 8.75+
7:56 pm
Pulling into Bangor and the air is close to what it has been, just somewhat worse. Intensity is higher at intensity 9.25+. The type profile is the same as above.
8:48 pm
I'm back at my desk.
About half way home from Bangor, intensity dropped to 8.5. Then when about 5 miles from my house, intensity spiked back up to 9.25+.
Fortunately, in the past 20 minutes since I've been home, intensity has dropped to 8.5+.
90% of the time, this happens...
I get home, get out of the car, and there is a jet flying in the air above my house or nearby. Yes folks, 9 times out of 10, and it happened again tonight. In fact, and I really mean this, when it does not happen I am genuinely surprised.
Tonight, the jet was flying directly above my house at medium-low altitude. I could not tell if there was a trail or not because it's dark outside.
9:34 pm
At about 9:15 pm we were hit with a plume of type Model Cement, Chalky-Bitter-Pharma, and Burnt Electronics/Fungal with Inflammatory and Mercury additives. Intensity has risen at a medium-fast rate and is now already up to 9 (of 10). The Burnt type is dominant, but the Inflammatory additive is nearly equally as strong.
12:34 am (3/10)
At almost exactly 12 midnight we were hit with a plume of type Model Cement and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. Intensity rose at a medium-fast rate peaking at 9.25 at 12:25 am. The Model Cement type and the Inflammatory additives are both the dominant types.
Do you see the pattern here? On most nights in recent history we are hit at about 11 pm, 12 m, and 1 am. The 12 m hit is usually very consistent. The 11 pm hit is sometimes a little earlier or later. The 1 am hit is usually between 1 am and 1:20 am. There are many patterns and they are all quite consistent.
1:27 am (3/10)
Just after 1 am we were hit with a plume of type Model Cement and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. Intensity is rising at a medium and is 8.75+ as I type this... and still rising. The Chalky additive is the dominant type.
March 8
Overnight
A typical night of poisoning.
First, they sprayed us into the night well after midnight last night.
Then, the night was typical with intensity ranging from 7.5 to 7.75+.
Then they hit us this morning at roughly the following times. I did not record the exact times, but they were 2-hours apart: Just after 7 am, 9 am, then 11 am.
7:30 pm
I spent the day in Bangor today doing various errands. The air was horrible all day ranging between intensity 8.5 and 9.5. What was most shocking is that they used a type I have not seen in many months (if I remember correctly): The Salty Metallic type. The air also contained the Chalky-Bitter-Pharma type and the Burnt Electronics/Fungal type with the Inflammatory and Mercury additives. This was an unusually strong spray day in Bangor.
The entire time I was there I saw only 1 chemtrail plume; only 1, and that was while I was driving home.
Why no more plumes? What happened to the 30 to 50 plumes that used to fill the sky each and every day in Bangor?
This article has the answer. Please make the effort to share it:
This is yet another blatant, glaring evidence that the plumes are fake.
1. First there were none.
2. Then from 1995 to 2005 the sky became covered with them all over the world.
3. Then from 2009 onward they began to disappear again.
What happened? Why did they disappear?
Clearly to hide this activity from the public. The air is absolutely no better than it was when the skies were covered with plumes, so please don't be deceived about this.
Now they are leaving much shorter, non-persistent trails in many/most areas and flying at higher altitudes all to keep this historic criminal activity out the sight-and-mind of the public.
So, tonight...
I got back home. From 6 pm to now (7:42 pm) the air has gotten worse and worse slowly.
When I first arrived home, intensity was about 7.5-
Now intensity is 8.75-.
The type profile is: Model Cement and Sharp Metallic (they have been using this more lately) with Inflammatory and Mercury additives.
This is what happened today in your country. You have 2 choices:
And while you're making your decision, ponder where you would be right now if the founders of your country choose #1.
8:36 pm
At about 8 pm we were hit with a powerful, full-spectrum plume of type Model Cement, Chalky-Bitter-Pharma, and Burnt Electronics/Fungal with Inflammatory and Mercury additives. This plume rose very quickly and peaked at intensity 9.25 and is now dissipating.
9:03 pm
We were just hit a few minutes ago with another powerful, full-spectrum plume of type Model Cement, Chalky-Bitter-Pharma, and Burnt Electronics/Fungal with Inflammatory and Mercury additives. This plume is rising very quickly and is already at intensity 8.75. The previous plum has not fully cleared when this one hit.
Folks, this is the most intense, continuous campaign that I have ever witnessed. It has never, in my 18 years of monitoring, been this frequent or this strong or has this many plume types consistently combined at one time.
With all the incredibly-wicked evil being exposed in government and corporate leadership, this should be absolutely no surprise at all.
Why?
Because they know a tired, fatigued, overwhelmed, hyper, emotionalized, and sick population does not get involved in politics, and that's exactly the way they want it.
Sadly, on the current trajectory, the future is very dark.
Push back in the next few months or there will not be another chance. We are on the edge folks... The very edge.
10:23 pm
At 10:03 pm we were hit with a very fast-rising, wide-spectrum plume of type Model Cement, Chalky-Bitter-Pharma, and Burnt Electronics/Fungal with Inflammatory and Mercury additives. Intensity rose quickly and peaked at 9 then subsided just as quickly. The fast rise and fall times means it was likely a low-altitude release.
Normally this plume would have had the Inflammatory additive as dominant, but this time is was not so. The Burnt type was dominant. It is very interesting that they are using the Burnt type so much. I don't know what they strategy is, but it sure seems they have some kind of reason for using it so often and so suddenly.
I have not yet done a write-up on the Burnt type, but in short, it really caused full body and joint aches. It just makes us sensitive people feel like we have been thrown on the floor several times.
The poisoning of the world continues on our watch.
10:58 pm
Just after I finished typing the previous log entry, we were hit with a plume Chalky-Bitter-Pharma with Inflammatory and Mercury additives. OK, so now the plumes were only 1/2 hour apart. Intensity is rising at a medium rate and is now (11:01 pm) at intensity 8.75- and still rising. The Blunt Metallic type is dominant but the Mercury component is extremely strong as well.
Why do you think they have increased the spraying/poisoning intensity? This likely means that very bad times are getting closer quickly.
11:48 pm
With the crazy-busy morning that I had, I forgot to mention that the one of this morning's plumes contained the Morgellon's additive. I don't remember which one, unfortunately, but it's worth mentioning being that this additive is very unique and is also sprayed according to a fairly well defined pattern.
Right now the previous plume that hit us at about 10:30 pm is still dissipating. Current intensity is 8.25-.
12:31 am (3/9)
At about 12 m we were hit with a plume containing only the Inflammatory and Mercury additives. This has been happening more often lately. The Mercury is extremely strong as I type this. Intensity is 9.5 and may have peaked.
If you have seen recent videos of people acting "crazy" online - as if they are losing their minds - mercury will do this to some people.
The Mad Hatter in Alice In Wonderland became "mad" (crazy) because we was a hat maker. The felt used in hat making is cured with mercury vapor. The Hatter was exposed to mercury and eventually became "mad".
This is almost certainly the reason dentists historically have the highest suicide rate of any profession. They are exposed to mercury if they use dental "amalgam" in their practice, and about 50% of U.S. dentists still do. Even though much of the world has outlawed mercury amalgam fillings, the U.S. still supports them. In fact, in states that offer dental assistance (welfare), these states will only pay for mercury fillings, NOT other low-toxicity types.
Why?
Almost certainly because of the numerous diseases they cause in the future life of the dental patient. This profits big-pharma to the tune of billions annually when you consider the huge number of ailments caused by mercury.
As you can see from yesterday's log, intensity continued into the night well after midnight.
The remainder of the night was typical compared to recent history. Intensity was between 7.5 and 7.75+ throughout the night. The type profile of the plumes was typical: Model Cement with Inflammatory and Mercury additives. The Inflammatory additive was the dominant component, as usual.
We were hit several times already today, and it's been brutal.
At about 6:20 am we were hit. Type was Model Cement with Inflammatory and Mercury additives. The Inflammatory additive was dominant. Intensity peaked at 9.25.
We were likely hit at about 8:10 am, but I cannot be sure because I was not awake to record it.
At 10:20 am we were hit again. Same type as the previous plume. Intensity peaked at 8.5-.
At about 11:10 we were hit again. Same type as the previous plume. Intensity peaked at 8.5.
At 12:20 pm we were hit again. This this was very different. Type was Model Cement and Chalky-Bitter-Pharma (Lithium?) with Inflammatory and Mercury additives. Intensity peaked at 9.75+. The Chalky type was dominant.
At 2:20 pm we were hit again. This plume was also different. Type was Model Cement and Chalky-Bitter-Pharma (Lithium?) with Biologics, Inflammatory and Mercury additives. This peaked at intensity 9-. The Biologic plume was the dominant type, by far.
I horrible criminal, intentionally toxic day. They are polluting the Earth so they can blame it on a lack of global rulership to justify an all-powerful central government which they reduce global population. They cause destruction, blame it on the people/population, then use their destructive activity to justify the "need" for global government. This is what is happening.
At about 3:20 pm we were hit with a plume of type typical Model Cement, Burnt Electronics/Fungal and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. Intensity peaked at 8.5+.
It interesting to note that, a little while after this plume hit us, I went into the basement and found that the Burnt component remained very strong in the basement even though it had already cleared in the rest of the house. As I had mentioned before, the Burnt Electronics/Fungal type (which is the newest type they have used against us), is clearly not small-particulate as all the other types are. This type can be filtered with a standard HEPA filter, however, all other types are barely affected by HEPA filters, if at all. You can see the results of my tests here:
I'm curious if this new type tends to settle to lower floors more quickly because of it's particle size. Just a thought. There will have to be many more experiences before we can form a hypothesis.
It's currently 4:50 pm and air intensity is 8-. The current mix in the air is Model Cement, Burnt Electronics/Fungal, and Chalky-Bitter-Pharma with Inflammatory and Mercury additives.
Nevertheless, the attack against all life continues.
6:28 pm
Since the previous plume the air has been loaded with the Chalky-Bitter-Pharma (Lithium?) virtually the entire time. We have had no real breaks. They are clearly using layered spraying to maintain air intensity at these levels (8.25+) for extended periods of time.
Lithium competes with your body's critical electrolytes (magnesium, potassium, sodium) depleting these elements from your body. When lithium is too high in the body, it produces symptoms virtually identical to Raynaud's disease.
Why do so many people now have to supplement constantly with magnesium just to maintain normalcy in the body? Why has magnesium supplementation grown to become it's own industry in the past few years?
The air has continued to be horrible hovering between intensity 8.25+ and 8.5-.
The primary poison in the air has been the Chalky-Bitter-Pharma type (Lithium?).
At roughly 8 pm we were hit with a plume of type Model Cement and Burnt Electronics/Fungal with Inflammatory and Mercury additives. Intensity is now 8.75-. This type smells horrible to those who can smell it.
The poisoning of the Earth continues.
11:17 pm
We have had 2 plumes since the last log entry.
At 9:45 pm we were hit with a full-spectrum plume of type Model Cement, Chalky-Bitter-Pharma, and Burnt Electronics/Fungal with Inflammatory and Mercury additives. Intensity rose quickly and peaked at 9 then dissipated quickly.
At 10:20 pm we were hit with another plume of the same type which also rose quickly in intensity, peaking at 8.5+.
At 11:19, just a couple minutes ago, we were hit with yet another plume of the same type.
I have never seen such frequent toxic drops as they are doing now. It used to be they hit us every 2-hours sometimes with longer breaks throughout the day. Now it is an onslaught where they don't even let the air return to ambient levels. The 2 newest toxins are horrible. The intensities are higher than ever.
How bad will it have to become before people decide to get involved and do the right thing.
We are still in the first phase of ending this crime; Exposing it to the public.
If you want to get involved, here is a list of things you may consider doing to help. We need tens-of-thousands working together to make an impact, but at this rate, Armageddon will be over long before we have enough people helping to expose this.
The intensity of the last plume has risen to 8.5 and is still rising at a medium-fast rate.
11:42 pm
The intensity of the previous plume is now at 9.25+ and still rising. The Inflammatory additive has risen to become the dominant component.
11:56 pm
The intensity of the previous plume is now at 9.75+ and still rising. The Inflammatory additive is still the dominant component.
12:37 am (3/8)
The intensity of the previous plume is now at 10. The Inflammatory additive is still the dominant component.
1:06 am (3/8)
At about 1 am we were hit with a full-spectrum plume of type Model Cement, Chalky-Bitter-Pharma, and Burnt Electronics/Fungal with Inflammatory and Mercury additives. Intensity is rising quickly is now already at 8.5. The previous plume did not clear before this plume hit us.
1:34 am (3/8)
A few minutes ago we were hit with plume of type Sharp Metallic with Inflammatory and Mercury additives. Intensity is rising quickly is now already at 8.25. The previous plume did not clear before this plume hit us.
The hit frequency today may be unprecedented. I do not believe I have seen this frequency of hits historically.
March 6
Overnight
Besides the warlike assault that we have been enduring most nights at about 11 pm, 12 m, and 1 am, the remainder of the night was a typical night of spraying with the typical types: Model Cement with Inflammatory and Mercury additives. Intensity ranged from 7.5+ to 8-. The Mercury additive was dominant throughout the night, and this has been the case for months now. We have number unique mercury symptoms.
We were hit with 3 major and very strong plumes this morning and with our typical 12 noon hit. Times for each plume were 6:30 pm, 8:25 pm, and 10:35 pm. All assaults were of the same type: Model Cement, Burnt Electrical/Fungal, and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. In all 4 plumes, the Inflammatory additive was the dominant type. Remember, they are using this type much more frequently and strongly in recent history.
So, the assault on the population continues while big media continues to promote the lie that we don't know why so many people are sick or dying.
1:32 pm
At 1 pm we were hit with another plume - as we are nearly daily at this time. This was the typical Model Cement and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. Intensity peaked at 8.75+ and is now at 8.25+ and declining.
The attack on all life continues.
2:11 pm
At about 2 pm we were hit with another plume of type typical Model Cement, Burnt Electrical/Fungal, Chalky-Bitter-Pharma with Inflammatory and Mercury additives. Intensity is now 8.5- and rising at a medium rate.
2:55 pm
The intensity of the previous plume is now at 9.5-, extremely intense.
3:35 pm
Just after 3 pm we were hit with a plume of type typical Model Cement, Burnt Electrical/Fungal, Chalky-Bitter-Pharma with Inflammatory and Mercury additives. Intensity is now 9.25+. The Burnt type is by far the dominant component. The odor is so strong it dominates all other odors.
5:17 pm
At about 5 pm we were hit with yet another plume of type typical Model Cement, Burnt Electrical/Fungal, Chalky-Bitter-Pharma with Inflammatory and Mercury additives. Intensity rose quickly and is now 8.75+. The Burnt type is the dominant component.
This has been a nightmarish day of spraying. Absolutely horrible.
6:03 pm
At about 5:50 pm we were hit with yet another plume of type typical Model Cement, Burnt Electrical/Fungal, Chalky-Bitter-Pharma with Inflammatory and Mercury additives. Intensity is rising quickly and is now already at 8.75. The Burnt type is the dominant component once again.
This is like living in the apocalypse; Truly!
7:34 pm
At about 7:20 pm we were hit with yet another plume of type typical Model Cement, Burnt Electrical/Fungal, Chalky-Bitter-Pharma with Inflammatory and Mercury additives. Intensity is rising quickly and is now at 8.75. The Burnt type is the dominant component once again.
8:30 pm
At 7:55 pm we were hit with yet another plume of type typical Model Cement, Burnt Electrical/Fungal, Chalky-Bitter-Pharma with Inflammatory and Mercury additives. Intensity rose at a medium rate and is now 8.5. The Inflammatory additive is the dominant component.
10:17 pm
We had our nightly break after the previous plume dissipated. Intensity dropped down to intensity 7. It felt amazing. Every ache and pain disappeared. The mercury-induced anxiety dissipated. My entire body relaxed. It's amazing how good I feel when I'm not being poisoned.
After this we were hit by 2 more plumes.
The first plume hit us at 9:40 pm. The second plume just a few minutes ago. Both were of same type: Sharp-Metallic with Inflammatory and Mercury additives, a combination that has become a little more common in recent history.
The first plume, at 9:40 pm, rose quickly for a few minutes and then dropped quickly within 10 minutes. This was likely a partial hit which fell on us after it had already mostly past us. This is likely why is was so short-lived.
The second plume is now rising and has now (10:32 pm) reached intensity 9.75-. The Inflammatory additive is the dominant component.
It's often so difficult to zoom out and see my entire life. The first 35 years were ruined by a corrupt system that promoted the use of highly-toxic mercury in vaccines and dental fillings. The second half of my life has been ruined by the same types of toxins from the same type of corrupt system continuing its quest for power leaving a trail of devastation in its wake.
What a life it could have been. My only option has been to turn the suffering into information that may help others avoid the same kind of suffering, in as much as this is possible. My life is a lemonade stand. Hope keeps me pushing on.
11:10 pm
The intensity of the previous plume is now 10.
1:03 am (3/7)
We got hit twice again at about 12 m and just a few minutes ago. If you have been following this log you will see this it the new nightly pattern: 11 pm, 12 m, 1 am.
The plume type for both hits was the same: Model Cement and Burnt-Electronics/Fungal with Inflammatory and Mercury additive. The Burnt type and inflammatory additive are the dominant components.
The 12 m plume peaked at 8.5-.
The current plume is now at 9.25- and still rising.
March 5
Overnight
A typical night of spraying with the typical types: Model Cement with Inflammatory and Mercury additives. Intensity ranged from 7.5+ to 7.75+.
The night before, however, the spraying was horrible and continued well past 1:30 am in the morning with the new Burnt-Electronics/Fungal type and the strong Inflammatory additive. See last night's log entry for details.
11:39 am
This morning there has been no discrete plumes. Air intensity has hovered between 7.5 and 7.5+. We will see what the rest of the day brings.
The mass poisoning of the world continues. Why are they doing this?
Just after the previous log entry we were hit with a plume of type Model Cement and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. Intensity is rising slowly and now 8+ and still rising.
1:28 pm
The previous plume is being layered so there have been no breaks and the intensity has steadily increased to the current level of 8.75. The type profile is the same except that the newest type is now in the mix. So we can conclude that one of the layered releases (released after the initial plume was released) contained the new type, which is called the Burnt-Electronics/Fungal type. This new component itself is now at intensity 8.25.
4:46 pm
By just after 2 pm, the horrible air intensity subsided back to 7.5+ and remained there until 3 pm
At just after 3 pm we were hit with a plume of type Model Cement, Chalky-Bitter-Pharma, and Burnt-Electronics/Fungal with Inflammatory and Mercury additives. Intensity rose at a medium rate up to 8.25+. By 4:10 pm intensity had dropped back down to ambient levels (7.5).
These are examples of non-layered plumes. They hit us, rise in intensity, peak, then fall in intensity back to ambient intensity all on 1 continuous motion.
It's now 4:50 pm and a few minutes ago we were hit with another plume. Intensity is rising slowly+ and is now at 7.75.
The attack on all life continues.
5:28 pm
The intensity of the previous plume is now 8.5+.
5:43 pm
A few minutes ago we have been hit with a plume of type Model Cement and Burnt-Electrical/Fungal with Inflammatory and Mercury additives. Intensity is now 8.75 and rising.
This is an example of layering. This new plume hit us before the previous plume cleared. They just layer one plume on another and keep the intensity up as much as possible.
7:56 pm
At about 7:20 pm we were hit with a plume of type Model Cement and Burnt-Electrical/Fungal with Inflammatory and Mercury additives. Intensity is now 8.75 and rising. The Burnt type is the dominant component.
8:48 pm
The previous plume fell in intensity quickly and by 8:30 was back to ambient levels (7.5).
At about 8:40 pm we were hit with another plume but this one is slower-rising. Type is the same however: Model Cement and Burnt-Electrical/Fungal with Inflammatory and Mercury additives. Intensity is now 7.75 and rising slowly. The Burnt type is the dominant component.
10:41 pm
The previous plume peaked at about 8.25 and then decreased fairly quickly in intensity.
Intensity remained at about 7.75- until about 10:30.
At that time intensity began rising against at a medium-slow rate and is now at 8.25-. The type profile is Model Cement, Chalky-Bitter-Pharma and Burnt-Electrical/Fungal with Inflammatory and Mercury additives. The Inflammatory additive is the dominant component. The Chalky and Burnt types are not far behind.
11:48 pm
At about 11 pm we were hit with a powerful plume of type Model Cement, Chalky-Bitter-Pharma and Burnt-Electrical/Fungal with Inflammatory and Mercury additives. The Inflammatory additive is - by far - the dominant component. The intensity of this plume peaked at 9.5 at about 11:40 pm and has now fallen back to 8.5-.
The attack on all life continues.
1:04 am (3/6)
The air has never dropped back to ambient levels since the last plume. As I type this, intensity is still at 8.5.
2 am (3/6)
Whatever the Burnt-Electronic/Fungal type consists of, they really, really want us to breath a lot of it. The air is saturated with this horrible odor right now and has been for a while. Intensity is a torturous 9.5+. Unbelievable. Truly.
March 4
Overnight
A typical night of spraying with the typical types: Model Cement with Inflammatory and Mercury additives. Intensity ranged from 7.5+ to 7.75+.
10:27 am
Just after 6 am we were hit with a plume of type Model Cement and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. Intensity peaked at 8.5- and subsided slowly. The Inflammatory additive was the dominant component.
We may have had others plumes that I was not awake to log.
It's snowing out (again), so it's no surprise that just before 10 am we were hit with a plume of type Model Cement and Sharp-Metallic with Biologic, Inflammatory, and Mercury additives. This plume is now at intensity 8.75-. The Inflammatory and Biologic additives are the dominant components.
Again, no surprise that they are spraying Biologics during precipitation. This is very often the case as they want the public to blame their illness on the weather.
This day has been like most others in recent history. The intensity throughout the morning - and often the afternoon - never subsides.
The previous plume that hit us at about 10 am has never cleared, so clearly they are utilizing high-frequency layered-releases to keep the intensity upon us without breaks.
The lowest intensity that we have had since 10 am is 8, but intensity as I type this is 8.75-. The type in the air now is Model Cement with Inflammatory and Mercury additives. The Model Cement type is the dominant component. The Biologic component has subsided and is still detectible in the air, but at a much lower intensity.
So, the attack on all life continues.
2:24 pm
The air was horrible all morning and for the first part of the afternoon.
By 1:30 pm, the air intensity of the previous series of layered plumes dissipated back to intensity 7.5.
At about 2 pm we were hit with a strong plume of type Model Cement with Biologic, Inflammatory and Mercury additives. Intensity is rising at a medium rate and is currently 8.5 and still rising. The Model Cement type is the dominant component. The Biologic type is at intensity 8.25 withing this mix.
I don't usually break down the intensity of the individual components within plumes simply because it would take a lot of additional time, nevertheless, it's important to know that individual components are usually airborne at different intensities.
This leads me to conclude that the components that are released are likely stored in different containers on the jet. These different components are very likely pumped by computer-controlled diaphragm pumps enabling each jet to control the amount of each component released over a given area at any given time. When computers are used in the flight logistics operation (and most certainly they are), when you incorporate wind velocity into the equation, and when you know the ailments and diseases that each component causes, you will be absolutely able to precisely control the resulting levels of certain ailments in selected areas. This empowers them to keep hospitals near (or at) capacity with a balance of health issues that they preselect.
Have you noticed how full hospitals are without completely overflowing these days? Then, when they build new hospitals, those hospitals become full without overflowing.
In Dunedin, Florida, spray intensity in the early 2010's was only 30% of the intensity it is here in Maine. After they built 2 brand new hospitals, the air intensity there rose to an overall mean (average) of 50-60% of the intensity in Maine.
How is this possible? Is this all by luck of the pharmaceutical complex? Is this all by wild chance?
Not likely. In all likelihood it's simply computer-controlled logistics.
3:07 pm
The intensity of the previous plume is now 9.75+ of 10. The Model Cement component is so strong that it's irritating my eyes. Unbelievable.
4:42 pm
At about 4:30 pm we were hit with a plume of type Model Cement and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. Intensity is rising at a medium-fast rate and is now 8.75-. The Model Cement type is the dominant component.
5:23 pm
At about 5:15 pm (45 minutes after the previous plume) we were hit with a plume of type Model Cement and Burnt-Electronics/Fungal with Inflammatory and Mercury additives. Intensity is rising at a medium-fast rate and is now 8. The Model Cement type is the dominant component.
The new plume type I described in detail in yesterday's log - Burnt-Electronics/Fungal. This type is most often sprayed in the morning in evening although we have had it sprayed on us some afternoons.
6:31 pm
They are just killing us here today. Symptoms are horrible for both of us.
At about 6:10 pm we were hit with a plume of type Model Cement and Burnt-Electrical/Fungal with Inflammatory and Mercury additives. Intensity is rising at a medium-fast rate and is now 8.75. The Burnt-Electrical/Fungal type is the dominant component.
8:16 pm
The previous plume, obviously layered to keep intensity up for an extended period of time, has only now subsided back to intensity 7.75-. It's been a long and very hard day of spraying. I can still smell the Burnt-Electrical/Fungal type in the air.
Perhaps this is our evening break and we won't get hit again until 11 pm. We'll see.
10:52 pm
At about 9:30 pm we were hit - partially - with a "near miss" plume. Intensity began to rise quickly and then just turned around and fell after about 10 minutes. Peak intensity was only 8. This is likely a plume that hit us from above while drifting horizontally, but was already mostly past us when it hit. This is likely why the duration was so short. Type was the Model Cement and Chalky-Bitter-Pharma with Inflammatory and Mercury additives.
I few minutes ago we were hit with another fast-rising plume, but this one is already at intensity 8.75 and still rising quickly. Type is again the Model Cement and Chalky-Bitter-Pharma type with Inflammatory and Mercury additives. The Model Cement type is the dominant component.
The attack on all life continues, and sometimes I feel like I live right in the middle of it all.
11:41 pm
At about 11:35 pm we were hit with a plume of type Model Cement and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. Intensity is rising quickly and is already at 8.5+. The Chalky type is the dominant component.
Most places are not sprayed as hard as they are spraying here. Because most people cannot taste or smell these horrible plumes and biologics being released on us day-after-day, they falsely believe it will never affect them.
They could not be more wrong.
Soon enough, they will increase the spray intensity... again. They have done it before. Then, when a person's toxicity level rises to a sufficient level, they will begin to smell and taste it. They will then wish they had listened and taken lawful action while there was still time.
This is really happening. History is littered with populations that suffered greatly because they ignored the warnings of those who knew what was really happening.
This is one of those times.
11:56 pm
Just a couple minutes ago I began smelling/tasting Biologics. This just a few minutes after the previous plume (11:41 pm) hit us.
This is not uncommon. I have witnessed several times when Biologics hit us shortly after the primary plume components hit us.
Two scenarios are possible:
1. Either these Biologics have a longer descent time than the plume's primary components, or
2. The Biologics were sprayed by another jet shortly after the primary components were released. This is possible as it's not unusual to see jets flying in a loose formation. Perhaps the second jet contains the Biologics. One day we will know it all.
12:22 am (3/5)
I few minutes ago I began smelling the new Burnt-Electronics/Fungal type. Intensity has risen quickly and is already at 8.75-. The previous plume is still strong in the air.
Obviously, this is a nightmarish night of spraying.
March 3
Overnight
A typical night of spraying with the typical type: Model Cement with Inflammatory and Mercury additives. Intensity ranged from 7.5+ to 7.75+. We certainly had some early morning plumes but I was not awake to record them.
11:05 am
At 8 am we were hit with a powerful plume of type Model Cement with Inflammatory and Mercury additives. Intensity rose quickly to 8.5+ and remained at that level until it began to slowly dissipate at about 10:45 am. The Inflammatory additive is the dominant component.
This is most certainly layered-spraying that keeps intensity high for extended periods of time. The other giveaway is that the rise time and fall time are different indicating that we are being hit with multiple plumes released at different altitudes, or at different locations yet close enough so that the plumes merge keeping intensity elevated for periods of time.
As I type this, the 8 am to 10:45 am plume which remained at intensity 8.5+ nearly 2 hours and 45 minutes is now dissipating slowly and is currently at intensity 8.25+.
The criminal attack on all life continues, day-after-day.
11:20 am
It continues. The previous plume has not fully dissipated and we have now been hit with another plume of the same type: Model Cement with Inflammatory and Mercury additives. Intensity began rising at about 11:10 am and is now already up to intensity 8.75-. The Inflammatory additive is the dominant component.
The bug-spraying of the population continues. Wake up world. This is happening.
12:02 pm
Air intensity from the previous plume is now at 8.5-.
The HAARP Hum is plainly audible today. I don't have to wait for a quiet time/place to hear it. Intensity is 4 of 5.
If you have been following this log, you will know that the HAARP Hum was not audible for months, and then for the past few weeks has been sparse and quiet usually humming at level 1 or 2 of 5. So the fact that it's clearly audible today at level 4 is a huge change.
1:05 pm
We were just hit with a plume of type Model Cement and Drywall Dust with Inflammatory and Mercury additives. Intensity is rising at a medium-fast rate and is now 8.5-. The Model Cement type is the dominant component.
2:17 pm
At about 2:05 pm we were hit with a plume of type Model Cement with Inflammatory and Mercury additives. Intensity is rising at a medium rate and is now 8.25+. The Model Cement type is the dominant component.
5:49 pm
Just before 4 pm we were hit with a plume of type Model Cement and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. Intensity rose quickly and by just after 4pm intensity was already up to 8.75+.
I drove away from the house and headed towards Ellsworth (south). About 10 minutes from my house intensity was already down to 8.25. 10+ Minutes later intensity was all the way down to 7.5-.
I have since driven to Bangor and intensity remained the same until the past hour when it rose gradually to 8-.
12:40 am (3/4)
At 8:17 pm we were hit with a plume of type Model Cement and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. Intensity rose at a medium-fast rate. By 9:30 pm intensity had hit 8.5.
Driving home, about half way to my house, intensity dropped to 8.25+. About 4 minutes up the road from my house, intensity rapidly climbed up to 8.75+. The type profile was Model Cement with Inflammatory and Mercury additives. The Inflammatory additive was the dominant component, by far.
At about 11:30 pm we were hit with a plume of type Model Cement with Inflammatory and Mercury additives. Intensity rose quickly and reached 9.5+ by 11:50 pm. It's now 12:48 am (3/4) and intensity has dropped to 8.25+.
For about 3 weeks now we have been hit with a new type of plume that I have not yet announced. I am cautious when announcing a new type because I must be sure it's something that will continue and not be a fluke or that the taste/odor is coming from some other source.
Well, now I'm sure. After 3 weeks of consistent spraying with this new type nearly every day, and now seeing that it consistently occurs at the same time as the other components, I am certain that this is indeed a new type.
This new type is different than all other types in that it is easier to smell than other types. Most types have more taste than odor, but this type has more odor, by far. The odor is horrible, strange, and hard to describe.
The best possible description I can find is that it consists of 2 distinct odors. One odor is somewhat like burnt electronic, more specifically, a burning transformer. As an electronics guy, I know that odor, and although this odor is not exactly the same, it is "in this direction". The second component is like burning mushrooms. The only reason I know what this smells like is because, many years ago, I rented a room to a Russian immigrant who would cook mushrooms directly over the flames of a gas stove. The odor was horrible, and when I first smelled this new chemtrail type, it reminded me of that odor. It's not identical, but again, it's in that general direction. So this new type consists of 2 horrible odors.
The other unique attribute of this new type is that it can be removed from the air with HEPA filters. Years ago I conducted extensive testing to determine which plume types could be removed by HEPA filtration, but I found that none of them could be removed. This is strong evidence that these particulates are smaller than 0.3 microns, which is very, very small. The particulate size of this new type must be somewhat larger than 0.3 microns.
I have not given this new type a name yet, but I will soon and will write an article providing details about it. Since they are now spraying us with this new type daily, I have to name it soon, so for now I'll call it the "Burnt-Electronics-Fungal" type.
They are including this new type daily, usually in the morning and the evening. It's present every time the Inflammatory additive is very strong, but I'll include all this information in the article about this new type.
It's now 1:08 am (3/4) and intensity of the previous plume is 7.75+. The Burnt-Electronic-Fungal type is still detectable in this mix.
The attack on all life broadens and deepens day-after-day.
March 2
Overnight
Last night broke the typical recent pattern where we are sprayed at about 11 pm, 12 m, then 1 am. Last night we did get our 11 pm poisoning at about 11:15 pm, but there were none at 12 m or 1 am. This may be because of the huge snow storm that hit us and is now on us dropping a lot of snow. Whatever the reason, the recent pattern was broken.
2:30 pm
This morning we were hit with plumes at the following approximate times: 6 am, 8 am, 9 am. All plumes had the same type profile: Model Cement with Inflammatory and Mercury additives. In all cases, the Inflammatory additive was far dominant.
Peak intensities: 6 am - 9.5+ 8 am - 8.75+ 9 am - 9.25
Since 9 am the air has oscillated up and down with gradual increases and decreases in intensity all peaking at between 8 to 8.25. The gradual delta in intensity indicates high altitude releases.
At about 2 pm we were hit with another slow delta plume of the same type we have had all morning except that it contains TYPE I Biologics. Intensity is currently 8.25- and falling slowly (slow delta).
The chemical/biological attack on all life continues.
This is another one of those afternoons where they keep the intensity above "ambient" levels all afternoon, which is 7.5 based on recent history.
We were just hit with a plume of type Model Cement and Chalky-Bitter-Pharma with Biologics, Inflammatory and Mercury additives. Intensity is rising at a medium rate and is now 8.
7:56 pm
A few minutes ago we were hit with a plume of type Model Cement and Drywall-Dust with Inflammatory and Mercury additives. Intensity is rising at a medium-fast rate and is now 8.25.
The Drywall-Dust type is sometimes used during precipitation, and we are getting lots of that right now. Like the Barium type, it is very drying.
9:26 pm
The previous plume peaked at 8.5-.
At about 9:15 pm we were hit with a plume of type Model Cement and Chalky-Bitter-Pharma with TYPE I Biologics, Inflammatory, and Mercury additives. Intensity is 8.25 and rising at a medium rate. The Biologic additive is the dominant component.
So, with all this snow, they certainly want everyone to believe the reason they got sick was from "the cold".
12:15 am (3/3)
Right on schedule, at 11 pm on the dot we were hit with a plume of type Model Cement with Inflammatory and Mercury additives. Intensity rose quickly peaking at 9. As is usually the case at night, the Inflammatory additive was the dominant component, by far.
Right on schedule again, at 12:10 am (3/3) we were hit with a plume of type Model Cement with Inflammatory and Mercury additives. Intensity is rising quickly and is currently at 8.75. As expected, the Inflammatory additive is the dominant component, by far.
If you have been watching this log, you will see the pattern. On most nights we get hit at 11 pm, 12 m, and then again at 1 am.
The attack on all life continues.
1:10 am (3/3)
Again... Right on schedule, at 1:02 am we were hit with a plume of type Model Cement with Inflammatory and Mercury additives. Intensity is rising quickly and is currently at 8.75. The Inflammatory additive is the dominant component, by far.
March 1
Overnight
The last night of February brought horrific spraying into the morning. You can read more in yesterdays' log. Another horrible day of poisoning.
Last night was another typical night of spraying. Intensity ranged from 7.5 to 8.25 into the morning. We did have a Biologic type plume (TYPE I) in the early morning, but I did not log the time.
I did not record plumes during the early AM so I will continue with daily logging below.
I will say that the HAARP Hum has become audible most evenings, although it is really quiet, usually at intensity level 1 or 2 of 5.
4:15 pm
Today we have been hit with plumes at the following times: 11:40 am, 12:45 pm, 1:50 pm (inflammatory), 2:55 pm, and 3:50 pm. All were very close to identical except for the plume at 1:50 pm which was dominated by the Inflammatory additive.
All plumes had this type profile: Model Cement and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. All plumes except the 1:50 pm plume had the Model Cement type as the dominant component. Peak intensities ranged from 8 to 8.75.
As I type this, air intensity is 8.75.
The poisoning of the Earth continues.
Expose the lies. They are designed to harm us, not to help us. Please share this page and the video below.
11:20 pm
This entire afternoon and evening intensity has risen and falling in the shape of a sine wave. Intensity rose and fell between 7.5 and 8.5. The type of all plumes was the same the entire time; Model Cement and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. I did not record the time of each plume because of the way they changed gradually.
At 11:15 pm, we were hit with a plume of the same type: Model Cement and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. Intensity rose quickly and is already at 9.5+. The Model Cement type and Inflammatory additives are the dominant components.
If you have been following this log, you will see that this is the typical pattern. We are hit at 11 pm, then 12 m, and then at 1 am most nights.
Last edited by Russ Tanner; 04/01/2305:27 AM.
Russ Tanner, Founder, Administrator, Programmer GlobalSkywatch.com My Chemtrail Story
![[Linked Image]](http://globalskywatch.com/chemtrails/ubbthreads.php?ubb=download&Number=17934&filename=20230331_120024.jpg)
![[Linked Image]](http://globalskywatch.com/chemtrails/ubbthreads.php?ubb=download&Number=17933&filename=20221103_113548.jpg)
![[Linked Image]](http://globalskywatch.com/chemtrails/ubbthreads.php?ubb=download&Number=17935&filename=20230331_130935.jpg)
![[Linked Image]](http://globalskywatch.com/chemtrails/ubbthreads.php?ubb=download&Number=17924&filename=fligh-tracking,2023-03-21_16-45-58.png)
![[Linked Image]](http://globalskywatch.com/chemtrails/ubbthreads.php?ubb=download&Number=17923&filename=Radar_2023-03-16.png)
