Daily Log of Chemtrail Spray Events: Log #19: July 2022
July 31
Overnight: Typical night of spraying. Ambient intensity was 7.5 with plumes on rough 2-hour intervals on odd hours (1 am, 3 am, 5 am, etc.) calculated based on the times I was awake. Peak intensities ranged from 7.75 to 8.25. Type was Model Cement and Barium with Inflammatory and Mercury additives. The Barium type was the dominant component throughout the night.
12:35 pm - We were hit with a plume at about noon. Type is the same as it was throughout the night: Model Cement and Barium with the Inflammatory and Mercury additives. Intensity is now 8 and rising slowly.
10:28 pm - Today we have had pretty toxic air all day. The type was Barium with the Inflammatory and Mercury additives throughout the day. Intensity peaked every 90 to 120 minutes but the delta (rate of change) was relatively gradual on the up and down sides. This indicates high altitude spraying with diffused edges. Intensity ranged from 7.5 to 8.25. We both felt sedated all day.
We have had no breaks, even tonight. As I type this we were hit with another plume at about 10:15 pm. This plume was of type Model Cement with the Inflammatory and Mercury additives. Intensity is now 8.5 and rising at a medium rate. The Inflammatory additive is the dominant component.
The attack on all life continues.
11:54 pm - We are now being hit with a plume of type Model Cement with Biologics, Inflammatory, and Mercury additives. Intensity is 8 and rising quickly.
July 30
Overnight: Typical night of spraying with evenly-spaced plumes throughout the night. Ambient intensity was 7.5 with plumes on approximately 2-hour intervals (calculated based on the times I was awake). Peak intensities ranged from 7.75 to 8.25. Type was Model Cement with Inflammatory and Mercury additives. The Mercury additive was the dominant type throughout the night.
11:59 am - We had another plume at about 11:30 am. Type was Model Cement with Inflammatory and Mercury additives. Intensity peaked at 8.25.
12:30 pm - At about 12:15 pm we were hit with a plume of type Sedative-Stimulant with Inflammatory and Mercury additives. Intensity is now 8 and rising at a medium rate.
1:51 pm - A few minutes ago we were hit with a plume of type Sedative-Stimulant with Inflammatory and Mercury additives. Intensity is now 7.75 and rising at a medium rate.
3:16 pm - A few minutes ago we were hit with a plume of type Sedative-Stimulant with Biologics, Inflammatory and Mercury additives. Intensity is now 8 and rising at a medium rate.
3:28 pm - The previous plume intensity is now 8.75 and still rising. And yes, this plume contains Biologics.
5:09 pm - We are being hit with a plume of type Mode Cement and Copper with Inflammatory and Mercury additives. Intensity is now 8 and rising at a medium rate.
12:51 am (7/31) - I spent the evening in Bangor tonight. We were hit with 2 plumes. The first at about 7 pm and the second just after 9 pm. Both were of type Model Cement with Inflammatory and Mercury additives. The 9 pm plume reached intensity 8.5+ and maintained that level until after 11 pm. The Mercury additive was the dominant component, yet the Inflammatory additive was strong as well.
Some time after 11 pm, intensity fell to 7.75+ and remained there.
It's now 12:57 pm and intensity is about 7.5+. The plume type is the same.
"And the nations were angry; and Thy wrath is come, and the time of the dead, that they should be judged, and that Thou shouldest give reward unto Thy servants the prophets, and to the saints and them that fear Thy name, small and great, and shouldest destroy them that destroy the earth.” -Revelation 11:18
For those who are participating in the destruction of the earth, know that God has promised that you have a destiny. If you do not repent of your destruction of the earth, you will be destroyed yourself and forgotten as if you never existed. If you never watched the movie "The Butterfly Effect", watch it and realize that you will become like the lead character; like someone who never existed. There is very little time left. Change now or you may deeply regret it for the rest of your short existence.
1:36 am (7:31) - Just after finishing the previous entry, we were hit with another Model Cement type plume with Inflammatory and Mercury additives. Peak is now 8.75 and rising at a medium rate. The Inflammatory additive is the dominant component.
So we're hit roughly every 2 hours: 7 pm, 9 pm, 11 pm (although this was too subtle to log), and now after 1 am.
July 29
Overnight: The air was a fairly steady 7.5 intensity throughout the night with the Model Cement type and the Inflammatory and Mercury additives. In fact, it has been this way all morning.
4:58 pm - We were just hit with a plume of type Model Cement and very strong Copper with Inflammatory and Mercury additives. This plume is causing a painful sensation in my sinuses inducing an immediate headache. Intensity is already 8.5+ and rising fairly quickly.
This is poison folks. Wake up world. You are just about out of time and there will be a grave consequence to pay for your apathy.
The earlier part of the day here was just like Bangor yesterday. The air was a steady 7.5 mix of the Model Cement type with Inflammatory and Mercury additives.
As I'm typing this, Laura, who does not smell chemtrails and does not know that I am now logging, just asked me, "What is going on with the air? I'm feeling dizzy." She feels the effects but does not smell or taste it unless it's extremely intense for me. I just asked what else she is feeling. She said, "My ears are screaming, I'm dizzy, and I'm getting a headache."
The pain for me with this new type begins in my sinuses. It's immediate. When the taste is in the air, the pain is my sinuses in seconds. Within 2 minutes I began getting pain behind my eyes. Several minutes later the pain begins in the crown of my head. At about the same time, I begin have heart anomalies which I will not go into at this time.
This reaction sounds like inflammation. The reaction with brain and heart point to mercury. Mercury's highest affinity in the body is the CNS (brain and nervous system) and heart. Mercury affects every body system and organ over the long term, but short term deposition is in the CNS and heart.
Is the "Copper" type a form of aerosolized mercury? Remember, I name them based on the taste, not the actual content. I don't know what each plume contains, but I do know the taste and the associated symptoms in myself and in those around me.
5:40 pm - About 10 minutes ago we got hit with a very strong [/b]Biologic[/b] type plume. This is horrible.
11:51 pm - Since the previous entry we have had no discrete plumes. The air has been a very consistent 7.5 in intensity. The type in the air has been the typical Model Cement with the Inflammatory and Mercury additives.
At 11:47 pm we were hit with a plume of type Model Cement with the Inflammatory and Mercury additives. This is a fast-rising plume and is already at 9 and still rising. The Model Cement type and the Inflammatory additives are the dominant components.
Notice they have not hit us with discrete plumes all day, then at night they begin to hit us. I'm sure you know how important sleep is. If they can lessen the quality of your sleep, they can shorten your lifespan.
As I type this the time is 11:57 pm and the intensity is up to 9.25+. The air is simply horrible and I wish everyone could smell this because this would be a huge motivator to everyone who is on the fence about whether or not they believe this is actually. I have met many hundreds who so smell and taste it and they know - they have zero doubt - that this is really happening. Why? Because you can't smell or taste something that isn't there. This is happening and it is a nightmare.
It's been less than 15 minutes and my wet mask is absolutely saturated with the odor of model cement which smells like finger nail polish (toluene).
We are witnessing the largest and most destructive attack against humanity - and all life - that has ever been committed. Many still don't believe this is happening, but historically, many didn't believe their own countries were committing historic and murderous crimes against their own citizens.
The only thing that actually keeps people from learning about and believing in chemtrails is the personal entitlement that coerces them to believe what they want instead of what the evidence reveals.
It's now 12:11 am (7/30) and the intensity of the previous plume has fallen to 8.5.
Overnight: Based on the times I was awake, it seems that we were hit on 2-hour intervals throughout the night. It was a typical+ night with intensity ranging from 7.5 to 8.25. Mercury symptoms were/are soaring along with the taste in the air that always accompanies mercury symptoms. The most pronounced of these mercury symptoms is tinnitus (ringing in the ears). The type through the night was Model Cement and Drywall Dust with Inflammatory and Mercury additives.
9:14 am - We were hit with a plume just before 9 am. Type was Model Cement and Drywall Dust with Inflammatory and Mercury additives. Intensity is now 8.5+ and rising. The Mercury additive is the dominant component. This type is really strong and is burning my sinuses inducing an immediate headache.
The attack on all life continues. This includes you, your spouse, your children, your parents, your relatives, your friends, your pet, your garden, your biosphere... all life!
10:43 pm - The previous plume never went away. In fact, intensity increased to 9.75 where it remains now.
There are no words for the pain and suffering that we - and many I know - have endured at the hands of those committing this crime against humanity. The responsibility for solving this corruption is on the people. We were warned that government quickly become madly corrupt when not purged by a diligent public, and this is where we stand today.
Remaining Log for 7/28
I'm typing this on 7/29/2022 at 5 pm because I was out of town all day on July 28th.
I spent the day and evening in Bangor. The air was at intensity 7.5 all day with only 1 plume... Yes! One plume which hit us at roughly 5 pm and dissipated in about 30 minutes. This pattern and intensity is dramatically different (less intense) from what we are experiencing at my house.
The 1 plume that hit us was a Model Cement plume with a piercing additive that I have not yet named or classified. Intensity of this plume rose to about 8 and than fell back to 7.5 in about 30 minutes.
Although intensity 7.5 will wear us down over an hour making us feel tired and fatigued, it's much better then being hit every 90 or 120 minutes with a plume peaking at 8.5 or 9 which is horrendous.
July 27
Overnight: Intensity throughout the night was milder than recent history at 7.25. Type was the typical Model Cement with Inflammatory and Mercury additives.
12:12 pm - This morning we were hit with 3 plumes. All were somewhat short-lived at about 35-40 minutes:
@ 9 am - Model Cement type and Copper with Inflammatory and Mercury additives. Peak intensity was 8.
@ 10:18 am - Model Cement type and Copper with Inflammatory and Mercury additives. Peak intensity was 8.25.
@ 11:05 am - Model Cement type and Copper with Inflammatory and Mercury additives. Peak intensity was 8.
Now 12:15 pm the previous plume has long dissipated and air intensity is sitting at 7.5 with the following components detectable: Model Cement and Copper type with Inflammatory and Mercury additives. Intensity 7.5 wears you down every hour, you feel more and more tired and achy.
1:52 pm - We are just now being hit with a plume of type Model Cement with Biolgoics, Inflammatory, and Mercury additives. The Biologic additive is the dominant component. Intensity is now 7.75 and rising quickly.
4:27 pm - At roughly 4 pm we were hit with a plume of type Model Cement and Barium with Inflammatory and Mercury additives. Intensity has risen slowly and is now 8.25+ and still rising slowly.
6:20 pm - We are just now getting hit with a plume of type Model Cement with Biologics, Inflammatory and Mercury additives. Intensity is rising at a fast rate and is now 8.25.
6:26 pm - The previous plume is still rising quickly an is now at intensity 8.75+. Quick-rising plumes are usually quick-dissipating plumes, so hopefully this poisoning session won't last too long.
6:48 pm - The previous plume has begun to dissipate. Intensity peaked at 9.5. The Inflammatory additives was the dominant component.
7:17 pm - Nothing quite like getting pummeled with poison by your government. The intensity of the previous plume dropped to 9 and then stopped dropping. It has remained at this intensity. This is likely a layered release where 2 or more jets fly in sequence several minutes from each other in order to maintain toxicity levels for a longer period of time. The Mercury additive is the dominant component. The world is asleep and we are all paying - and going to pay - a historic price for their negligence.
10:12 pm - At 9 pm we got hit with a plume of type Model Cement and Copper with the Inflammatory and Mercury additives. Intensity peaked at 8.25 and quickly dissipated. I was outside about 2 hours earlier and saw a jet leaving a non-persistent plume just upwind of my house. It released its poisons at "medium" altitude. I have found that it usually takes 90 to 120 minutes for plumes to descend from that altitude, so there is no surprise here.
Now the air is at intensity 7.5-. I can smell and taste all the components of the previous plume, and this is usually the case. Just so everyone knows, the air never clears... never.
When chemtrails began in the area I lived (Jamestown, NY) in 2005, the air would clear between plumes. I was unable to smell or taste anything in the air after a plume cleared. Over the following 2 years the "clear space" between plumes decreased until eventually there was no clear space between plumes anymore. Between then and now, the intensity between plumes increased in intensity and is now typically 7.5 nearly all the time.
As I have typed this entry, we have been hit with another plume. Type is Model Cement and Drywall Dust with Inflammatory and Mercury additives. Intensity is rising fairly fast and is already 8.25.
"And the nations were angry; and Thy wrath is come, and the time of the dead, that they should be judged, and that Thou shouldest give reward unto Thy servants the prophets, and to the saints and them that fear Thy name, small and great, and shouldest destroy them that destroy the earth.” -Revelation 11:18
This end-time Bible prophecy predicts that there will be a group of people who "destroy the earth". This prophecy makes a reference to advanced technology because, obviously, you cannot destroy the earth with bows and arrows.
To be clear, the word "destroy" is defined in Strong's Bible Dictionary as this:
to rot thoroughly, that is, (by implication) to ruin (passively decay utterly, figuratively pervert): - corrupt, destroy, perish.to rot thoroughly, that is, (by implication) to ruin (passively decay utterly, figuratively pervert): - corrupt, destroy, perish.
So it does not mean to dissolve or "make vanish", but rather to ruin, decay, or corrupt.
This, folks, is what chemtrails are doing to the Earth. Chemtrails have been found to contain - not only a wide array of known toxic metals - but also mold spores (and more), and, as you may know, I have detected biologics in chemtrails beginning in 2009.
For those who are participating in this process of "destroying the earth", think about God's words here. He says He will "destroy those who destroy the earth."
Have you been duped into believing that you are doing something good or beneficial or helpful to humanity? Have you been convinced that you are helping your country? Have you been convinced that God approves of your participation in this attack on all life?
You have been lied to, and you are not only on the wrong side of history, you are on the path to "destruction" by God himself. If ever there was a time to change and make a difficult decision, that time is right now.
It's now 10:56 pm and the previous plume peaked at 9.5 about 15 minutes ago. My wet mask is now saturated with the odor of model cement which spells like finger nail polish. Imagine for a moment what this chemical - whatever it actually is - is doing to your lungs and organs.
You are living in a time unlike any other in human history. How will you respond?
11:14 pm - The previous plume is still in the air. Intensity is 8 and declining slowly. What a day it has been.
July 26
Overnight: Mercury was dominant last night. Intensity ranged between 8 and 8.25. Woke up with tremendous mercury symptoms.
2 pm - A few hours ago we were hit with a plume of type Drywall Dust with strong Mercury additive. Intensity peaked at 8.5.
At 1:40 pm we were hit with a plume of type Model Cement with Biolgoics and Mercury additives. The Biologic type was the dominant component. Intensity peaked at 8.
2:31 pm - At about 2:15 pm we were hit with another plume of type Model Cement and Drywall Dust with Inflammatory and Mercury additives. Intensity is now 8.25 and rising at a medium rate. The Drywall Dust type is the dominant component.
4:02 pm - At 3:57 pm we were hit with a plume of type Model Cement and Drywall Dust with Inflammatory and Mercury additives. Intensity is now 8.25 and rising at a medium rate. The Drywall Dust type is the dominant component. They just keep coming today.
10:33 pm - We've had a few plumes throughout the evening. There were 2 types:
1. Model Cement and Copper with Inflammatory and Mercury additives.
2. Model Cement with Biologics, Inflammatory and Mercury additives. The Biologic type lasted for a few hours - most of the late afternoon and early evening.
They peaked between 7.75 and 8.25.
At about 10:15 pm we were hit with a plume of type Model Cement and Copper with Biologics, Inflammatory and Mercury additives. Intensity is 8 and rising slowly.
July 25
Overnight: Terrible night of spraying. We had several plumes spaced out between 90 and 120 minutes (based on the times I was awake). Type was Model Cement and Drywall Dust with Inflammatory and Mercury additives. The Drywall Dust and Mercury were the dominant components. Intensity of each plume peaked between 8.75 and 9.25.
11:53 am - The ambient air intensity between plumes is 8.25 so it's not declining much between plumes. As I type this intensity is 8.5. To breath feels like there is very fine power in the air. It's like breathing air saturated with baby powder. This is a typical symptom of the Drywall Dust type. It feels like you cannot get enough oxygen; like you cannot fully catch your breath.
1:42 pm - Air intensity continues to oscillate up and down as each new plume falls. Right now intensity is 8.5 with the Drywall Dust type being the dominant component. We continue to feel oxygen deprived as the air feels like is "thick" with dust and hard to breath.
I wonder what these particulates are doing to our lungs.
3:46 pm - The air has continued to be horrible today... and now we have Biologics. AT about 2:30 pm - roughly - we were hit with a plume of type Model Cement and Drywall Dust and Biologics with the Inflammatory and Mercury additives. Intensity peaked at 8.5 and is now 8.25 and declining slowly.
5:28 pm - The air literally tastes like a sleeping pill! They are spraying us so hard with the Sedative-Stimulant type that is makes us have no energy and feel completely lethargic, but we still push through it. Yes, this is ALL being caused by chemtrails.
At about 4:30 pm we were hit with a plume of type Barium, Copper, and Sedative-Stimulant with the Inflammatory and Mercury additives. This plume peaked at 8.75 and is now 8 and declining slowly.
The attack on all life continues on our watch. Wake up world. This is happening.
10:08 pm - The air has been consistently terrible all day until about 9 pm. At that time, we had our nightly "break" where intensity dropped down to 7.25.
Then, at 9:50 pm air intensity began climbing. Now, intensity is back up to 8.75- and rising at a medium rate. Type profile is Model Cement with the Inflammatory and Mercury additives. The Inflammatory additive is the dominant component.
July 24
Overnight: Based on the times I was awake, we had plumes at rough 2-hour intervals throughout the night. Type was Model Cement with Inflammatory and Mercury additives. The Mercury additives was the dominant component. I woke up with strong mercury symptoms from the spraying.
11:21 am - The air at this moment is at intensity 7.75. Type is Model Cement with Inflammatory and Mercury additives. The Mercury additive is the dominant component.
1:08 pm - The air has been steady at intensity 7.75 (see above), until now. Just a couple minutes ago, the air intensity began increasing quickly an is now at 8.25 and rising quickly. This plume continues the Model Cement and Copper types along with the Inflammatory and Mercury additives.
You can learn more about chemtrail types here: Chemtrail Types
9:52 pm - I spent the day in Bangor. Intensity throughout the day was between 7.25 and 7.5. Type was the typical Model Cement type with Inflammatory and Mercury additives. At 6:38 pm I was at Shaw's near downtown. At the moment we got hit with a plume of type Model Cement and Copper with the Inflammatory and Mercury additives. Intensity rose quickly but I soon headed home.
This chemtrail combination (Model Cement and Copper types with Inflammatory and Mercury additives) continued all the way home, but this is not surprising because I know the jets that poison the entire Bangor area (and beyond) come from the east and I live east of Bangor.
Intensity dropped to typical ambient levels (7.25 to 7.5) after a while. From about 8 pm to 9:45 pm we had our nightly "break". During this time intensity dropped to 7.
At about 9:45 pm we were hit with a fast-rising plume of type Model Cement and Copper with strong Inflammatory and Mercury additives. As is usually the case during this time of the evening, the dominant component in this plume was the Inflammatory additive. Fast rising plumes are typically fast-declining and so it was tonight. It's now 10:08 pm and air intensity has dropped to 7.5+.
It is my hope and prayer that the entire world will wake up to what is being done to all of us and that this horror can be pushed back to some distant time in the future. But if this epic crime against humanity is not stopped, then we will all soon be experiencing the most horrific time in human history.
May God help us.
July 23
Overnight: We had a series of strong plumes evenly-spaced through the night. Type was the typical Model Cement with Inflammatory and Mercury additives. The Inflammatory additive was the dominant type.
1:25 pm - We've already had 2 Biologic plumes this morning beginning at roughly 10 am. The full type profile is Model Cement and Biologic with Inflammatory and Mercury additives. As I type this, this combination type containing biologics is still in the air. Intensity of these plumes peaked between 8.5 and 8.75. The current intensity is 8.25.
What a sad situation.
10:29 pm - This has been another horrible day of spraying. From early afternoon until about 8 pm the air has been continuously at intensity 8.5. The type has been Model Cement and Barium with the Inflammatory and Mercury additives. It's interesting how much they have been using the Barium type lately despite that fact that there is no incoming precipitation.
At about 8 pm intensity decreased to 7.5- in just over 20 minutes. This was our evening "break". Intensity remained at that level until about 9:45 pm when it began increasing very slowly. Now, intensity is at 8 and rising very slowly.
Overnight: Strong night of spraying. Besides the plumes that hit us at 11:30 pm and 1:30 am (reported in yesterday's log), we had additional plumes during the night, but I didn't mark the times. Overall intensity during the times I was awake ranged from 7.75 to 8.25.
10:36 am - At about 10:15 am we were hit with a plume of type Model Cement with Inflammatory and Mercury additives. The Model Cement type is the dominant component. Intensity now is at 8.5 and rising at a medium rate.
12:59 pm - A few minutes ago we were hit with a plume of type Model Cement with Inflammatory and Mercury additives. Intensity now is at 7.75 and rising at a medium rate. The Model Cement type is the dominant component.
1:34 pm - The intensity of the previous plume is now 8.5 and rising. This may be a layered release (where 2 jets fly a mile parallel offset by just a few minutes).
1:37 pm - This second plume must be another separate plume. Intensity is rising quickly and is already at 8.75+. The Model Cement is the dominant component.
1:45 pm - The previous plume is still rising rising quickly. Intensity is now at 9+. My wet mask is now saturated with the odor of toluene.
3:15 pm - A few minutes ago we were hit with a plume of type Model Cement with Inflammatory and Mercury additives. Intensity now is at 8 and rising quickly. The Model Cement type is the dominant component. You can see this is quite a busy day.
The attack on all life continues.
12:11 am (7/23) - This has been a horrible day of spraying. I'll try to keep this short.
I went into Bangor later this afternoon. The air was very strong and this intensity stretched all the way to Bangor.
By the time we were headed home, intensity dissipated to 7.75.
On the way home about 20 minutes from my home, intensity increased to 8.25, plus the Copper type became present at the same location.
By the time I got home, the plume (type: Model Cement and Copper with Inflammatory and Mercury) increased to intensity 9.5 (a nightmare) and remained at that level until about 9:30 pm. At that time is decreased to 7.5 in just 20 minutes. During this time of intense spraying, the Model Cement type, Inflammatory additive, and Copper type were all extremely intense at the same time.
It remained at intensity 7.5 until about 11 pm. At that time intensity increased to 8.5 and remained there until about midnight. It's now 12:22 am and intensity has decreased slowly and is currently 7.75.
There is so much I could say, but in short, this has been an absolutely horrible day of spraying.
July 21
Overnight: Milder-than-usual night of spraying. Intensity was between 7 and 7.25 most of the night (based on the times I was awake). Type was Model Cement and Barium with Inflammatory and Mercury additives.
1:54 pm - The morning was without discrete plumes, until now. We were hit at about 1:45 with a plume of type Model Cement and Barium with the Inflammatory and Mercury additives. Intensity is now 7.75+ and rising at a medium rate.
The attack on ALL LIFE - this includes you and your family - continues day-after-day with the consent of those who remain silent.
2:22 pm - The previous plume intensity has risen to 8.5 and is still rising. The Barium type is the dominant component.
2:38 pm - The previous plume intensity is now 8.75. The metallic taste in the air is absolutely horrible.
2:46 pm - The previous plume intensity is now 9. The metallic taste in the air is getting worse and worse. They Barium type is still the dominant component.
6:22 pm - At about 5:55 pm we were hit with a plume of type Model Cement and Copper with the Inflammatory and Mercury additives. Intensity rose at a medium rate to the current level of 8.5+. The Copper type is the dominant component.
1:41 am (7/22) - At roughly 11:30 pm we were hit with another plume of type Model Cement and Copper with the Inflammatory and Mercury additives. Intensity peaked at 9.
At about 1:30 am we were hit with another plume of the same type. Intensity is at 8.25 and rising at a medium rate.
The mass-poisoning continues.
July 20
Overnight: Very strong night of spraying. We were hit every 2-hours at roughly 30 minutes past the top of the hour (2:30 am, 4:40 am, etc.). Intensity ranged from 8.25 to 8.75. Type was a combination of Model Cement and Barium with Inflammatory and Mercury additives.
10:38 am - The air continues to be horrible. Right now intensity is 8.5+ and the type is the same as it was all night: Model Cement and Barium with Inflammatory and Mercury additives. The Barium type is the dominant component. The air is very drying. I am wearing a wet mask that is already partly-dry after only 30 minutes of use.
The attack on all life continues.
1:09 pm - At about 12:30 pm we were hit with a plume of type Model Cement with Inflammatory and Mercury additives. Intensity is now 8.5+. The Mercury additives it the dominant component.
3:51 pm - We have been breathing the Barium chemtrail type with the Inflammatory and Mercury additives all afternoon without breaks. Intensity was 8.5 a few minutes ago. They have been releasing plume after plume just up-wind of my house. I can see the beginning and end of each plume. They are very short and just a few hundred feet north-west of my house. What a world we live in.
10:47 pm - We have had 3 plumes since the previous entry. Times were 7:30 pm, 9:48 pm, and 10:40 pm. Each of these plumes have been the same type: Model Cement and Barium with Biologic, Inflammatory, and Mercury additives. The Biologic and Inflammatory additives have been mild but detectable. The Barium type has been dominant. Peak intensity of each plume was 8, 8.25, and the current plume is at 7.75. The Biologic component of the current plume is very subtle but detectable.
11:10 pm - The plume that just hit us at 10:40 pm has risen in intensity to 8.25. The Inflammatory additive is the dominant component; this is usually the case in the evenings.
It's been a strange day because the Barium type is usually only sprayed in front of - and during - rain or snow. Today it was sunny but they sprayed the Barium type anyway.
The attack against all life continues.
July 19
Overnight: Horrible night of spraying. We were hit just before the top of every odd-numbered hour (~12:50 am, ~2:50 am, ~4:50 am, ~6:50 am, ~8:50 am, 10:50 am). They have been spraying the Barium type with the Inflammatory and Mercury additives since 7 pm last night with I was doing a life talk show. Intensity of each plume throughout the night ranged from 8.25 to 9.
11:05 am - Current intensity is 8.25+. Type is Barium with Inflammatory and Mercury additives. They are using the Barium type because we are having rain, but only a little. This chemtrail type is how they prevent or minimize rain using a process called hyper-nucleation.
Barium exposure dramatically reduces potassium in the body and can induce heart arrhythmias and heart attacks.
2:06 pm - 5 Minutes ago we were hit with a plume of type Model Cement with the Inflammatory and Mercury additives. Intensity is rising quickly and is now at 8. The historic crimes against humanity continue.
3:44 pm - A couple minutes ago we were hit with another plume of type Model Cement with the Inflammatory and Mercury additives. Intensity is rising quickly and is now at 8.25.
11:07 pm - The entire afternoon the air was full of the Model Cement and Barium type with the Inflammatory and Mercury additives. Intensity was between 7.5 and 8.
At about 11 pm we were hit with a plume of type Model Cement and Copper with the Inflammatory and Mercury additives. The Inflammatory additive is the dominant component. Intensity is currently 8.25.
11:29 pm - The previous plume intensity has risen to 9.
11:36 pm - The previous plume intensity has now risen to 9.25.
12:29 am - Between 11:50 pm and 12:20 am air intensity dropped to 7.5. Now it's 12:30 am and we have been hit by another plume. The type is the same as the previous plume and has already increased in intensity to 8.25.
July 18
Overnight: Strong night of spraying. Intensity ranged from 7.5 to 8.25. Type profile: Model Cement with Inflammatory and Mercury additives. Based on the times I was awake, I estimate toxic plumes reached ground level every 2 hours beginning at about 2:30 am. I woke up with numerous mercury symptoms and inflammation associated with heavy spraying.
12:06 pm - About 30 minutes ago we were hit with a plume of type Model Cement with Biologic, Inflammatory, and Mercury additives.
We are witnessing the largest most destructive crime against humanity in human history.
1:42 pm - About 35 minutes ago we were hit with a plume of type Model Cement with Inflammatory and Mercury additives. Intensity rose at a medium rate and is now 8.75+. My wet mask is already saturated with the odor of toluene (model cement).
Imagine what this is doing to your live and kidneys.
11 am (7/19) - The air continued to be bad throughout the afternoon, although I did not record the specific times we were hit with plumes.
Beginning at 7 pm we had a strong, fast-rising plume hit us. Type was Barium with Inflammatory and Mercury additives. Intensity quickly rose to 8.25+. This happened while I was being interviews on a radio talk show so I told the host about the event.
Plumes continues throughout the evening and night (see next day's log).
July 17
Overnight: Typical+ night of spraying. Intensity ranged from 7.5 to 8. Type profile: Model Cement and Sedative-Stimulant with Inflammatory and Mercury additives. I don't have hard information on the times sprayed, but based on the times I was awake, I would estimate they reached ground level every 2 hours beginning at 2 am.
9:42 am - Current type profile: Model Cement and Sedative-Stimulant with Inflammatory and Mercury additives. Intensity is currently 8 and falling slowly.
2:30 pm - At roughly 1 pm we were hit with a Biologic plume. Intensity of this plume quickly rose to 8.25+ and has been steady since. The previous plume has maintained it's intensity at 8 to 8.25 since reaching ground level at 9:42 am (see above).
7:46 pm - We were hit with a horrible plume of type Model Cement with strong Inflammatory and Mercury additives at about 7 pm. Intensity rose quickly and is now 8.75 and rising quickly. The Inflammatory additive is the dominant component.
July 16
Overnight: A median night of spraying. Intensity ranged from 7.25 to 7.75. Type was Model Cement with the Inflammatory and Mercury additives. Plume timing hit us in near 2-hours intervals, but contrary to previous nights, they are hitting us near even hours instead of odd hours; example 2, 4, 6, 8 am instead of 1, 3, 5, 7 am. The mercury symptoms were dominant through the night.
10:35 am - Air is currently at intensity 7.5 and steady. Type in the air is Model Cement and subtle Barium with Inflammatory and Mercury additives.
12:25 pm - The intensity of the previous plume has not changed, but I am now smelling/tasting a new component, specifically the Sedative-Stimulant type. Intensity of this type is rising at a medium rate and is now 7.75+. It is common these days that different types are layered together so they are released 30 to 60 minutes apart but remain in the air together.
This is toxic poison being intentionally released into the air and I have seen for many years how it affects people and their health, and it is not good. You are witnessing the largest crime against humanity in human history happening right now. These plume are not only poisonous (Mercury, Barium, Strontium, Lead, Cadmium, Arsenic, etc), but they induce inflammation which is deadly over the long-term. Do you think they don't know this?
Wake up world. This is happening on your watch.
12:33 pm - Well, that didn't take long. I am now tasting the Copper type in the air. The overall air intensity has now risen to 8.25- and consists of the Model Cement type, the Sedative-Stimulant type, the Copper type, and the Inflammatory and Mercury additives.
You can learn all about different chemtrail types here: Chemtrail Types
2:13 pm - From about 1:40 pm to 2:05 pm air intensity decreased to 7 which was nice. However, at about 2:05 pm we were hit with a very fast-rising plume of type Model Cement with Inflammatory and Mercury additives. Intensity is already up to 8.5+ and still rising.
10:25 pm - Intensity throughout the afternoon was 8 +/-. Type was the same as the previous type.
At about 8:30 pm intensity dropped to about 7.25 for about 90 minutes.
About 30 minutes ago intensity began rising slowly to the current level of 8. Type is Model Cement and Copper with the Inflammatory and Mercury additives. The Copper type is the dominant component.
"The price good men pay for indifference to public affairs is to be ruled by evil men" -Plato
10:55 pm - The intensity of the previous plume is now at 9 and still rising. What a world we live in.
July 15
Overnight: A median night of spraying. Intensity ranged from 7.25 to 8. Type was Model Cement with the Inflammatory and Mercury additives. We are getting hit at roughly 2-hour intervals beginning at 1 am.
10:25 pm - I spent the day in Bangor today. The air amazingly consistent, and not in a good way. The chemtrail fallout type in the air was Model Cement with Biologic, Inflammatory, and Mercury additives. The Biologic additive was the dominant type. Intensity throughout the day has been 7.75.
TYPE III Biologics - For a few months now I have reported that Biologics have been used most days. This is, of course, a dramatic change from years past. The biologics that have been used during this time are different from previous biologics. I have reported them as TYPE II biologics because I needed to see if the change was consistent and not just a fluke before I would create a new category. TYPE II biologics cause flu-like symptoms, and this new type is similar but has some key differences. So TYPE III biologics will be added to the list of biologic types that I have encountered from chemtrails.
TYPE III biologics cause body aches as if you have a severe flu but without the runny nose and congestion. It makes joints and muscles hurt very badly. I spoke to a friend who experiences it and he described it as being through a dryer. I agreed. It was a great analogy. What is interesting is that many experience no symptoms from this type except perhaps some fatigue, but no pain. This fact makes it likely this is an engineered biologic, but why should this surprise us after what we've seen this past couple years.
12:41 am - For the past 30 minutes or so, we have the Copper type in the air. The previous plume remains unchanged except that the Copper type is now added to the mix. Intensity of the overall plume is 8 and the Copper type is now the dominant component.
The attack on all life continues.
July 14
Overnight: A median night of spraying. Intensity ranged from 7.25 to 7.75. Type was Model Cement and Copper with the Inflammatory and Mercury additives. The Copper component was subtle but present. The Inflammatory additive was dominant. Reverse-engineering based on the times that I was awake and the intensity delta/direction, I would say that we were hit every 2 hours as usual: 3, 5, and 7 am.
11 pm - I spent the day in Cumberland and Freeport today. The air was milder than usual all the way from Bangor to Portland. Intensity was a pretty steady 7.5. Type was Model Cement with the Inflammatory and Mercury additives. The Model Cement type was the dominant component.
While in Portland, at 5:28 pm we were hit with a plume that raised the air intensity from 7.5 to 7.75 - a somewhat subtle change. The type was again the Model Cement type with the Inflammatory and Mercury additives.
On the way home, between Waterville and Bangor, air intensity rose to 8.25+. As we got closer to home, intensity rose again to 8.5 peaking when I arrived home at 8.75.
If you have been tracking this log, you know that the area within 5 minutes of my town is - on average - the heaviest-sprayed area I have encountered in this state. Is this luck or fate? I do not know. I only know that I am so tired of being poisoned and I'm so saddened by a population that largely does not care. My faith in humanity is restored by those dedicated and brave souls that are willing to tell the truth regardless of how difficult it is - on multiple levels.
Right now it's 11:14 pm and we are now getting hit with another plume. Intensity is now 8 and rising at a medium rate.
Just another night being systematically poisoned by people who believe the world is overpopulated. Wake up world. Your time is short.
11:27 pm - The previous plume intensity has risen to 8.75. Pure evil.
July 13
Overnight: A medium night of spraying. Type profile: Model Cement and Barium types with Inflammatory and Mercury additives. Intensity was between 7.5 and 7.75 throughout the night. The Mercury additive was dominant, once again.
1:34 pm - A medium/heavy day of spraying. We've had a couple plumes in the past few hours. Type profile: Model Cement and Barium types with Biologic, Inflammatory, and Mercury additives. Intensity of the first peaked at 8. The Intensity of the plume that is currently on us is 8.5 and rising quickly. This plume has non-diffused edges indicating a low-altitude plume (it traveled less distance to reach us).
I have pointed this out before, but it's worth repeating in a different way. I have noticed that the different elements on plumes sometimes reach ground level at different times. For example, with the plume we are breathing now, the Biologic component hit us about 20 minutes before the Model Cement component. So the question is: Is this 2 separate releases or do these component just descent at different rates? This has been occurring often in the past few months. It did not happen much before that, so the question remains.
It's critical also to note that there are no persistent plumes in the air, although you can see the haze in the air. The haze is always present and has been for many years. The takeaway is this: You cannot judge the intensity of the poison at ground level by the presence of visible chemtrail plumes in the sky. Sometimes you can, but most of the time in our area, the correlation between persistent visible plumes and ground-level intensity is zero. There is, however, a correlation between the sum total of all plumes, whether they be persistent or non-persistent. So for example, right now we have no persistent plumes in the air, but if you go outside and watch, there will be numerous short, non-persistent plumes being dropped at medium and low altitudes.
So the moral of this dissertation is this: They are attempting to hide the plumes from the public by spraying non-persistent plumes at higher altitudes. It's critical to know this if you are trying to correlate health symptoms but cannot smell or taste chemtrails. The following article explains this in detail:
It's now 1:46 pm and the air intensity of the current plume has dropped to 8.25 - still very strong. My wet mask is saturated with the odor of Model Cement which is the odor of highly-toxic toluene.
6:48 pm - At 5:30 pm we were hit with a plume of type Model Cement with Inflammatory and Mercury additives. Intensity peaked at 8.25 and quickly dissipated.
At 6:22 pm we were hit with another plume of the same time. Intensity is now extreme - 9.75 and still rising. The Inflammatory additive is the dominant component. The people doing this to us are monsters. One day soon the entire world will know this. For now... we suffer.
7:30 pm - The previous plume intensity is still high. It's currently at 8.75 intensity.
10:30 pm - At 9 pm we were hit with a plume of type Model Cement and Copper with the Inflammatory and Mercury additives. This plume surged in 30 minutes to a peak intensity of 10. The Copper type was nauseating. The Inflammatory additive was intense. The mercury symptoms we horrid. There are no words for this time in history; A time when the largest crimes in history are being committed but the public is fundamentally entitled to ignore it.
What a nightmare.
The intensity in the air is now (10:35 pm) 7.75. It should be zero. Monsters rule the world.
10:40 pm - That didn't take long. Just 5 minutes ago we were hit with another plume of type Model Cement and Copper with the Inflammatory and Mercury additives. Intensity is rising quickly and is already at 8.5. God help us. This plume is nearly identical in composition to the previous plume.
July 12
Overnight: A heavy night of spraying. Type profile: Model Cement and Barium types with Inflammatory and Mercury additives. Intensity was between 7.75 and 8.25 throughout the night. The Mercury additive was dominant.
You may have noticed the addition of the Barium type which is rarely present during nighttime spraying. I have neglected to mention that, for the past several weeks, this type has been added to the nightly mix on most (>50%) nights. This component has been used at a lower intensity than other components, but it is certainly still present. This type causes dry mouth and sinuses among other symptoms. If you have been waking up with a dry mouth and wondering why, now you know. I will be sure to include it in the future even if it's used at a lower intensity.
9:21 am - The air is still thick with the same mix that was used overnight (see above). Intensity is currently 8.
2:28 pm - The air has been thick all morning, but it's been decreasing in intensity very slowly. At this time, intensity is down to 7.75 which is the best it's been all day. Type is the same it's been throughout the night (see above). We have had no breaks.
The intentional attack on all life continues, and it will only get worse until the public pushes back.
3:11 pm - About 10 minutes ago intensity of the plume began to increase at a medium rate. It's now at about 8.25 and rising. The type is the same mix that we have had all night (see "Overnight" section above.)
10:34 pm - The day was horrible... all day. The type was the same all day with no changes. We had 2 peaks in intensity in the late afternoon and then again in the early evening. I didn't mark the times.
At roughly 8:30 pm we had our evening "break". Intensity gradually dropped down to 6.75 and stayed there until about 10:25 pm. Then it began to rise slowly. The current intensity is 7.75+. The type is the same type that we have been breathing all day.
11:23 pm - The previous plume dissipated about 20 minutes after my last entry, but now we're getting hit with another. Intensity is rising at a medium rate and is currently at 8. Type is the same type we have had all day.
July 11
Overnight: We had a horrific night of spraying. Plume type profile: Model Cement with the Inflammatory and Mercury additives. The Mercury additive was, by far, the dominant component throughout the night, although the Inflammatory additive was also powerful. Based on the times I was awake, and I'm awake a lot during the night, we had the typical 3, 5, 7, and 9 am plumes. I woke up with horrible mercury symptoms from the plumes. And yes folks, I know the plumes are the cause of the mercury symptoms because the plume coincide with mercury symptoms in both myself and Laura precisely and they have coincided since we were first sprayed in 2005. That is a long time and a lot of data.
4:39 pm - Spent most of the day in Bangor. The air was thick with the Inflammatory and Mercury additives throughout the late morning and afternoon. The air in Bangor had the same composition but was somewhat less intense, as is usually the case compared with my home. At about 1 pm
I began smelling/tasting the Biologic additive in the air. Intensity rose slowly and reached 8.25 by 2 pm.
At roughly 3 pm I began tasting/smelling the Inflammatory additive which, of course, causes inflammatory in us. This also rose slowly.
The assault on all life continues. Will you be part of the solution? If so, then spread the word by sharing links to this and other chemtrail-related websites to everyone you know. We are experiencing a historic crime against humanity like no other time in history and there is little time left. Please get involved now.
10:20 pm - The bad air continued all day. The type was the same all day all the way from here to Bangor and back. Mercury was dominant. Inflammatory was strong.
Finally, at roughly 8 pm, intensity began to drop. By 8:30 pm intensity was down to 7.25. By 9:30 pm intensity had dropped to 6.5. It felt amazing. All my inflammation disappeared. All my pain went away. I felt peaceful, calm, and focused. I felt like I did when I first had my amalgam fillings removed.
It's now 10:25 pm and intensity has begun to rise. It's already back up to 7.75- and rising slowly. The inflammation is setting back in along with all the associated pain. I have lived in chronic pain that has been artificially induced by the super rich of the world who believe they have the privilege to hurt and kill others. I have lived in this chronic pain since chemtrails began in 2005. This is what they have turned my life into. I know many others are suffering as well. Many, I have no doubt, have died as a result of the spraying.
The level of crime we are experiencing is historic. The damage being done is historic and being ignored (intentionally) by mainstream media. Why? because they are completely controlled by the same super-rich conducting the spraying.
The worse part is that so much of the public does not care that they ignore is all. These people are the enablers. Without them, such crimes could not exist. It is a difficult debate to determine if the enablers or the financiers are more wicked. This is a sad, sad situation.
July 10
Overnight: They used the Sedative-Stimulant tonight. Intensity through the night was between 7.5 and 7.75 (medium).
6:02 am - About 15 minutes ago we were hit with a combination plume of type Model Cement and Sedative-Stimulant with the Inflammatory and Mercury additives. Intensity is now 8.5 and increasing rapidly. The Model Cement type and Inflammatory additive are the dominant components.
6:15 am - The intensity of the previous plume is now at 9.5+ and still rising.
6:51 am - The Copper chemtrail type with the Inflammatory and Mercury additives is now present in the air. Intensity is now 9.5 and still rising. We were hit at about 6:30 am. The Inflammatory additives is the dominant component.
12:18 pm - We were hit with another plume at 10:30 am. Type profile: Model Cement with Inflammatory, and Mercury additives. intensity peaked at 9.75. The Mercury additive was the dominant component. The mercury as so strong that I began having screaming tinnitus.
At about noon we were hit with a Biologic type plume with strong Inflammatory and Mercury additives. This plume peaked a few minutes ago at intensity 9.
Wicked men are destroying the world, but this is being allowed by a population unwilling to care.
12:50 pm - We are just now getting hit with a plume of type Sedative-Stimulant and Copper. Intensity is already 8.25 and is rising at a medium rate. Looks like it's going to be a busy day as they poison entire counties.
I was told by people online that a copper taste is associated with some radioactive metals and that copper was tasted in the air at Cherynobyl at the time of the nuclear disaster there. It's likely no coincidence then that many, including myself, are seeing rapidly rising uranium levels in our blood tests. Yes folks, we are seeing this increase at the same time over large areas of the U.S.
Why are these plumes so close together temporally? It's likely because we are seeing 2 different programs spraying. We have depopulation spraying mercury, biologics, and inflammatory agents while the weather control program is spraying hypernucleation agents.
For at least part of this day, you will see the coarse 2-hour spraying pattern provided by the depopulation program, and you will also see the intervening plume related to hypernucleation. You can see this pattern because the 2-hours interval spraying continues but is interleaved with the other type of spraying. So simply put, you have 2 overlapping patterns from 2 separate "programs".
Also, I just found out that Laura and I woke up at exactly the same time last night. We are not married, not boyfriend/girlfriend, and we don't share bedrooms. We only share a house which we live on separate ends of. Yet, we, very often, wake up at the same times throughout the night. The explanation is simple. Strong plumes in the night wake us up and since the plume penetrates both side of the house at the same time, we wake up at the same time.
This is happening folks.
1:42 pm - The intensity of the Copper type in the air is now at 9.25. The taste is nauseating and it burns my sinuses with a piercing pain, plus causes other symptoms. Yes folks, these symptoms are caused by the spraying of these known toxic metals and chemicals into the air.
I was outside for just a few minutes and 2 jets passed by. The trails being left are very short, non-persistent. These are chemtrails, not "contrails" as the media claims.
10:20 pm - This day has been milder than usual, although not mild. The plumes we have been hit with have been very mild. It seems they have traveled a long distance before hitting us. Intensity has been between 7.5 and 7.75.
At about 10:10 pm we were hit with a plume of type Model Cement and Copper with strong Inflammatory and Mercury additives. Intensity is rising at a medium rate and is currently at 8.25.
I am so sick of being poisoned. What is worse is that the public is largely apathetic about it. This world is in so much trouble. We are on a trajectory for absolute disaster and what is such a shame is that it didn't have to be this way. The disaster that is coming upon us could have been avoided, but I think it's too late. I wish it weren't true. Apathy may be the ultimate expression of selfishness and payday is coming. What an absolute mess.
The world will wake up. The only question is this: Will it be by free-will or by apocalyptic disaster? I know that answer.
12:38 am (7/11) - We are getting hit with a plume of type Model Cement and Copper type with the Inflammatory and Mercury additives. Intensity is now 8 and rising at a medium rate.
July 9
Overnight: A medium night of spraying. Intensity ranged from 7.5 to 8.25. Type profile: Model Cement with Inflammatory, and Mercury additives. The Inflammatory additive was the dominant component. Plumes hit us at the usual times, roughly, slightly before 1 am and 3 am, and then slightly after 5 am and 7 am. All this is extrapolated based on the times I was awake.
1:12 pm - At 12:50 pm we were hit with a very strong, very fast-rising plume. Type profile: Model Cement type with Inflammatory, and Mercury additives. This plume rose very quickly to a peak intensity of 9.5 in just 20 minutes. It's now 1:15 pm and intensity has begin to drop and is now at 8.75 and dropping quickly.
Remember, fast-rising plumes normally drop fast. They are low-altitude releases where the edges of the plume have not had time (or distance) to diffuse and "soften". This is why their intensity rises quickly.
I also must stress that short, non-persistent plumes are just as toxic and intense as long, persistent plumes. They began shortening plumes in our area around 2009. We went from having skies that daily look like war zones to skies that look like small air shows. So remember, the number of visible persistent plumes is not proportionate to the intensity of toxic air created. The short plumes are just as strong and cause just as severe symptoms in sensitive persons. It's now 1:19 pm and intensity of this plume has dropped to 8.25.
Do you have sudden onset headaches, fatigue, nausea, or other symptoms? This may very well be the cause.
4:21 pm - Hit with another plume at about 4:10 pm. Type Profile: Model Cement type with Biologic, Inflammatory, and Mercury additives. Intensity is rising at a medium rate and is currently at 8.5.
7:43 pm - We were hit with a plume at 7:15 pm. Type Profile: Model Cement type with Inflammatory, and Mercury additives. Intensity is rising at a medium rate and is currently at 8.5.
10:46 pm - At 10:40 pm we were hit with another plume. Type Profile: Model Cement type with Inflammatory, and Mercury additives. Intensity is rising at a fast rate and is currently at 8.75. The Inflammatory additive is the dominant component. This is typical They normally inundate us with very strong Inflammatory additive in the evenings.
The world's largest crime against humanity in history continues.
July 8
Overnight: A relatively hard night of spraying. Intensity ranged from 7.75 to 8.5 throughout the night. Although I was not up enough to confirm exact times that plumes hit us, based on the times I was awake, it does seem the pattern was the same as it has been for some time, namely, 1 am, 3 am, 5 am, 7 am, and now again at 9 am (it's now 9:25 am). Type was a wide mix of Model Cement and Copper types with Biologics, Inflammatory, and Mercury additives. The dominant component was the Inflammatory additive. The Biologics are subtle, but certainly present.
11:25 am - At 10:46 am we were hit with another combination plume. Type profile: Model Cement and Copper types with Biologics, Inflammatory, and Mercury additives. Intensity peaked at 8.5 and is now subsiding.
12:35 pm - About 3 minutes ago we were hit with a fast-rising plume. Type profile: Model Cement and Copper types with Biologics, Inflammatory, and Mercury additives. Intensity is rising quickly and is currently at 8-. The Biologic component is mild but present. The Copper component is stronger than the Model Cement component.
1:57 pm - I spent a few minutes outside and saw 5 jets spewing short, non-persistent chemtrails. Yes, the short ones are chemtails just as the long ones are chemtrails. They are all chemtrails.
The air has gotten worse and is now intensity 9 with the Copper being the dominant component. These people are evil and are committing crimes that make even the worst historic tyrant look like a saint.
Please be involved daily in exposing this historic crime against humanity. There is now time left to wait.
6:30 pm - This horrific day of spraying continues. We have not had a single break. Air intensity has remained between 8 and 9.25 the entire afternoon. Type profile: Model Cement and Copper types with Inflammatory, and Mercury additives. As I type this, intensity is 8.5 and rising.
11:14 pm - We had out (almost) nightly "break" where air intensity dropped to 7.25+ for well or an hour. But beginning at about 10:30 pm intensity began rising very slowly. Type profile: Model Cement and Copper types with Inflammatory, and Mercury additives. Intensity is now 7.75- and still rising very slowly. What a few day's it's been.
July 7
Overnight: Somewhat milder-than-usual night of spraying. Type was the Copper type with Inflammatory and Mercury additives. The Mercury additive was the dominant type.
9:10 am - We are now under a plume of type Copper with Inflammatory and Mercury additives. This hit us about 8:30 am and continued rising at a slow rate. Current intensity is 8 and still rising slowly. The Mercury additive is the dominant component.
11:35 am - The air has been saturated with the Copper type with the Inflammatory and Mercury additives all morning until about 11:10 am when it began dissipating. In the past 20 minutes it completely dissipated and now the air is back to ambient intensity levels.
The current intensity ambient level is 7.25+.
1:03 pm - At about 12:30 pm we were hit with another plume of type Copper. Intensity increased at a medium rate and is now at 8.5.
2:52 pm - At about 215 pm the previous plume peaked at intensity 9+. In the past 15 minutes intensity dropped back to just-above ambient levels of 7.5. These plumes are likely layered judging by the way remain in the air for often hours and then suddenly decline within 15 minutes. I have seen this pattern for years so it's nothing new. It's not the most common pattern, of course, but it's not uncommon either.
The largest crime against humanity in human history continues.
3:20 pm - About 5 minutes ago we were hit with a plume of type Model Cement with the Biologic, Inflammatory and Mercury additives. Intensity is rising quickly and is already at 8.75. This is the most commonly type sprayed plume for years, but it's the first occurrence of this plume type today making today quite different.
4:51 pm - We are just now getting hit with a plume of type Model Cement with Inflammatory and Mercury additives. Intensity is raising rapidly.
5:01 pm - Intensity of the previous plume is now at 8.75. The mass poisoning of the world continues day-after-day.
10:51 pm - Horrible day of spraying. We've had several plumes and continuous bad air all evening and night. Our latest plume hit us at about 10:30 pm. Type is Model Cement with extremely strong Inflammatory and Mercury additives. Intensity is now 8.75 but was 9 a few minutes ago. The Inflammatory additive is the dominant type.
If they are spraying like this over a larger area, I have no doubt those with "asthma" are suffering. Did you know asthma is the new #1 childhood disease, and smoking is at an all-time low. So where is this disease coming from? I know because I've seen how it affects sensitive people and asthma is one of the symptoms.
Do you realize the massive implication of this? Government intentionally poisoning the public to the point of causing suffering and disease?
Those who have been paying attention know that they have been poisoning the people for a long time. Whether by harmful policy by FDA, or intentionally spraying toxic metals into the atmosphere, this has been going on a long time.
9:22 (7/8) - Throughout the evening and night we had continued plume with the Model Cement type and Copper type with very strong Inflammatory and Mercury additives. We had no evening "break" as we often do.
July 6
Overnight: Milder than usual night of spraying. Intensity was between 6.75 and 7.25. Type was the typical Model Cement type with Biologic, Inflammatory, and Mercury additives. The Mercury additive was the dominant type throughout the night. The Biologic intensity is low, but still present.
10:29 am - Intensity this morning has been between 7.25 and 7.5 with the same type and additives that were used overnight. The HAARP Hum is audible and currently at medium intensity.
11:46 am - The Biologic component of the previous plume has itself risen to intensity 7.75+ in the past 30 minutes. No surprise considering we have rain in the forecast.
9:03 am (7/7) - I spent the day and evening in Portland. Overall, spraying from Bangor to Portland was milder than usual. At about 7 pm we were hit (in Portland) with a plume of type Model Cement with Biologic, Inflammatory and Mercury additives. The intensity of this plume was milder - and later - than usual. If you view posts from the past when I've been in Portland, they typically are hit right about 5 pm every time I've been there, and this 5 pm plume contains strong inflammatory additive. The response that most people have to this type of plume is tiredness, and this is likely because inflammatory reduces circulation resulting in general tiredness.
So, overall, it was a milder-than-usual day of spraying all the way from Bangor to Portland.
July 5
Overnight: Typical night of spraying. Type was Model Cement with Inflammatory and Mercury additives. The Mercury additive was the dominant type through the night. Intensity ranged from 7.75 to 8.25.
4:08 pm - Air intensity has ranged from 7.5 to 8.25 all day, until now. The type has been the typical Model Cement with Inflammatory and Mercury additives. The Mercury additive has been dominant.
A few minutes ago we were hit with a strong Biologic type plume. Intensity has risen quickly and is already at 8.5 and will be at 8.75 in just a couple minutes at the current rate-of-rise.
It's interesting how often we have been getting hit with Biologic plumes in the afternoon in recent history. It's almost a daily occurrence.
The crimes against humanity continue. Public apathy about these crimes continues. We live in a sad state of affairs. People who are not willing to actively manage their country will lose it.
7:26 pm - At about 6:30 pm we were hit with an extremely powerful Biologic plume. Not surprisingly, it began raining a little during this time. The plume intensity peaked at 9.5 and has now subsided to 8.
8:21 pm - We are now being hit with another Biologic plume. Intensity is now 8.25 and rising at a medium rate.
July 4
Overnight: A heavy night of spraying. The dominant chemtrail fallout was mercury. Intensity ranged from 7.75 to 8.75. Type was Model Cement with Inflammation and Mercury additives.
9:12 am - The current toxic chemtrail fallout in the air is the typical combination of Model Cement type with Inflammatory and Mercury additives. The Mercury additive is still the dominant type. Intensity is now 8 and fairly steady.
Mercury has profound emotional effects because it affects hormone pathways dramatically and immediately upon exposure. This is the reason I felt dramatically better the same day my amalgam (mercury-based) dental fillings were removed.
I witness immediate changes in people's mood and energy levels when a chemtrail plume descends on us. The emotions induced are heightened and negative because mercury blocks neuroregulators while wreaking havoc on hormone balance. The result is fear, anxiety, anger, and a host of other emotions that derive from these.
I saw a published study years ago that plainly said that mercury toxic persons are more easily controlled as a population. I know this to be true based on the information I present here:
3:59 pm - We were hit with 2 plumes since noon. The first was at about 1:20 pm and the other was at about 3:40 pm. Both were of type Model Cement with Biologic, Inflammatory, and Mercury additives. The Inflammatory additive was dominant in both plumes. Peak intensity of the first plume was 8.25 and peak intensity of the second plume is happening now at 9.
10:30 pm - We have had 2 plumes since the last entry. Hit times were roughly 6:20 pm, 8:20 pm, and The type of all plumes have been the same: Model Cement with Biologic, Inflammatory, and Mercury additives. The Inflammatory additive has been the dominant component in every plume. The 8:20 plume peaked at intensity 9.5 (extreme).
We were hit with another plume about 10 minutes ago (10:20 pm). The plume has been the same type as previous one. Intensity is now 8.25 and rising slowly.
The attack on all life continues day-after-day.
July 3
Overnight: Typical night of spraying. Type was Model Cement with Inflammatory and Mercury additives. Intensity ranged from 7.5 to 8.5 (based on the times I was awake).
1:06 pm - We have been hit with 4 plumes since about 9 am this morning. Type for all plumes has been the Model Cement type with Inflammatory and Mercury additives. Peak intensity ranged from 8 to 9.
About 5 minutes ago we were hit with the latest plume. Type is the same as above but intensity is peaking much higher than the previous plumes and intensity rose much more quickly. Intensity is already at 9 and still rising. This is a very fast rising plume indicating a low-altitude release. Fast-rising plume also decline quickly in intensity so this likely won't last more then 30 minutes.
4:48 pm - We have been hit with 2 more plumes since the previous entry. Type for all plumes has been the Model Cement type with Inflammatory and Mercury additives. The Inflammatory additive has been the dominant component. The last of the 2 plumes hit us about 10 minutes ago. Intensity is now 8.5 and rising at a medium rate.
7:02 pm - At about 6:45 pm we were hit with a slow-rising plume of type Barium with strong Inflammatory and Mercury additives. Intensity is now 8.75 and rising slowly. The Inflammatory additive is the dominant component.
10:10 pm - We had our evening "break" from the mass-poisoning from about 8:30 pm until now. During the break intensity dropped to about 6.75 which was wonderful while it lasted. All my pain and inflammation disappeared. I felt wonderful.
A few minutes ago we were hit with another plume of type Barium with the Inflammatory and Mercury additives. Intensity is rising at a medium rate and is now 8.
I'm so tired of historic crimes against humanity.
July 2
Overnight: Medium night of spraying. We had a plume at 1 am that peaked at 8.25. Type was the typical Model Cement with Inflammatory and Mercury additives. We may have had other plumes but I was not awake during those times.
12:29 pm - The morning was milder than usual with ambient levels of the Model Cement chemical between 7.25 and 7.5.
At about noon we were hit with a plume of type Model Cement with the Inflammatory and Mercury additives. Intensity is presently 8.5 and rising at a slow rate.
3:36 pm - At 3:04 pm we were hit with a plume of type Model Cement with Biologic, Inflammatory and Mercury additives. Intensity is presently 8.25 and rising at a medium rate.
4:49 pm - Just after 4 pm we were hit with a Biologic plume. Intensity rise at a medium rate and is now at 8.75.
There are no words for the crimes being committed. Even worse is the fact that the people seem to be content ignoring epic crimes against themselves. How much longer will this be allowed to continue?
5:51 pm - About 5 minutes ago we were hit with another Biologic plume. Intensity is already at 8 and rising fairly quickly.
10:56 pm - We had our evening "break" between about 7:30 pm and 10:50 pm. Intensity dropped to 7.25. it was a nice break, but I knew it would end.
About 10:50 pm we were hit with with a plume of type Model Cement with the Inflammatory and Mercury additives. Intensity is already 8.25 and rising rapidly. As is nearly always the case in the evening, the Inflammatory additive is the dominant component, by far.
The attack on all life continues.
1:22 am - At about 1:05 am we were hit with a plume of type Model Cement with the Inflammatory and Mercury additives. Intensity is now 8 and rising at a medium rate. As expected, the Inflammatory additive is the dominant component.
July 1
Overnight: We were hit with 2 very strong Biologic plumes with the Inflammatory and Mercury additives after midnight. The first was at 3:45 am and the second at 4:15 am. Both of these plumes were very intense peaking at 8.75 and then 9.5 respectively. Although the Biologic component was dominant, the Mercury additive was extremely strong and caused mercury symptoms.
6:32 am - We were hit with a plume of type Sedative-Stimulant with the Biologic, Inflammatory, and Mercury additives at about 5:50 am. This is a very slow-rising plume. Intensity is now at 8 and rising slowly. The Biologic and Mercury additives are dominant in this plume. If you have followed this log, you know that the Sedative-Stimulant usually is released with high-mercury. This type causes dramatic mercury symptoms.
The attack on our world continues.
7:33 am - The previous plume continues to climb in intensity. Intensity of the slow-rising plume is now 8.75 and my mercury symptoms are kicking in pretty hard right now.
12:45 pm - We've had several strong plumes between the previous log entry and now. Type has been Sedative-Stimulant with the Inflammatory and Mercury additives. The Mercury additive has been dominant all morning. Mercury is a powerful immunosuppressant.
4:44 pm - We have had several more plumes this afternoon of type Sedative-Stimulant with the Inflammation and Mercury additives. Intensity is now 8 and falling slowly. It's interesting how they spray the same types for periods and then that type is not used for weeks or months.
10:09 pm - We have had more plumes throughout the early evening.The type was the same as earlier plumes
From about 8:30 pm until 10 pm we had our evening "break". Intensity dropped down to 7.25 and it was wonderful.
At about 10 pm we were hit with a plume of type Model Cement with Biologic, Inflammatory, and Mercury additives. The Inflammatory additive is the dominant component. The Biologic component is subtle.
2:31 am (7/2) - We were hit with a plume of type Model Cement with Inflammatory and Mercury additives right at 1 am. The plume peaked at 8.25 and has now dissipated to 7.75.
Last edited by Russ Tanner; 10/07/2206:05 PM.
Russ Tanner, Founder, Administrator, Programmer GlobalSkywatch.com My Chemtrail Story
![[Linked Image]](http://globalskywatch.com/chemtrails/ubbthreads.php?ubb=download&Number=17892&filename=Revelation-18-23,v02.jpg)