Link to this page using this social media safe link:
https://gsw.bz/log2112


Daily Log of Chemtrails Spray Events: Log #12: December 2021






December 31

Overnight: Typical night with ambient levels between 7.25 and 7.5

First Plume: ~4:50 am - Model Cement type with Inflammatory and Mercury additives. Intensity peaked at 8.25.

Second Plume: ~6:58 am - Model Cement type with Inflammatory and Mercury additives. Intensity peaked at 8.5.

Third Plume: ~8:50 am - Model Cement type with Inflammatory and Mercury additives. Intensity peaked at 9.75.

Fourth Plume: 10:45 am - Model Cement type with Inflammatory and Mercury additives. Intensity peaked at 8.75.

11:08 am - The previous plume is still in the air at intensity 8.25 and declining slowly. What a horrible morning it has been for spraying.

Remember when I told you that holidays are nearly always the worst spray days? Well, it look like today is getting started early with lots and lots of mercury to be sure everyone's fear, anxiety, and general emotional state will be amplified. See the link below for more information about how mercury changes personalities.

See The Emotional Effects of Mercury

11:20 am - Just hit with a very strong plume of type Model Cement with the Inflammatory and Mercury additives. Intensity rose very quickly indicating a low-altitude release. It's now 11:33 am and intensity is 9.5 (extremely strong) and still rising. Crimes against humanity are being committed like none other in history. Besides chemtrails, here is something everyone in Earth needs to see:

See What Fauci Really Did

12:56 pm - We were just hit with a Model Cement type plume with Inflammatory and Mercury additives. Intensity currently at 8 and rising quickly.

2:52 pm - We were just hit with YET ANOTHER Model Cement type plume with Inflammatory and Mercury additives. Intensity currently at 7.75 and rising quickly. The previous plume peaked at 8.75. I have been forced to wear my wet mask a lot today. Again, this is a time when people get together so they are spraying mercury - the emotional/fear amplifier - very hard.

Also, I hope you can see the pattern. Plumes hit us roughly at 2-hour intervals. I have reported this pattern for years.

3 pm - The previous plume is now at intensity 9 and still rising. This has been a "nightmare" day of spraying.

4:40 pm - Just hit with another Model Cement type with Inflammatory and Mercury additives. Intensity is - again - rising quickly.

6:28 pm - Just hit with another Model Cement type with Inflammatory and Mercury additives. Intensity is rising quickly yet again. Many low-altitude hits today.

10:30 pm - Just hit with a plume of type Sharp Metallic. This is not a commonly-used type these days. Intensity is rising quickly.

10:49 pm - The previous plume intensity has risen to 8.75 and seems to have peaked. This plume is mixed with a Model Cement plume that became stronger with time. It's as if they were released at nearly the same time but the Sharp Metallic reached ground level first.

Despite the fact that we have been living with daily spraying for 25 years, it's still astounding that they are getting away with this and that so many people still just don't care. They don't want to face the reality that something like this could actually happen. It sounds like a horrible movie, but it's not. It's as real as it gets and many have paid the ultimate price for the apathy of the public as a whole.

11:31 pm - Hit with a plume of type Model Cement at about 11:10 pm. Intensity peaked at 9.75 and is now declining but is still at 9.25. What a horrid day.

1:16 am - Just hit with a plume of type Model Cement.





December 30

Overnight: Slightly milder than normal night averaging intensity 7.25+

We had no significant discernible plumes in the am.

I spent the day in Bangor, Maine today, so all reports in the afternoon until 7 pm relate to Bangor and not my home area.

Just before 12 noon, we (in Bangor) were hit with a strong Model Cement type plume with Biologics. This plume remained until about 4 pm and did not change much in intensity despite traveling around a large area in Bangor. This uniform, persistent coverage likely indicates a high-altitude release layered over a large area.

The air remained mild-ish until about 5:30 pm when we were driving to Shaws near downtown. We were hit with a Model Cement type plume with the Biologic, Inflammatory, and Mercury additives. Incidentally, about 10 minutes after this extremely strong plume hit, we saw 2 ambulances near Starbucks near the mall. This is a very common pattern I see when very strong plumes, namely, that ambulances are only present when a powerful plume is in the air. I have written about this in previous entries.

After arriving home we were hit with strong Model Cement type plume with the Inflammatory and Mercury additives at 7:20 pm. It's now 7:49 pm and this plume intensity is now 8.75 (extremely strong).

Over the past few days, I have again witnessed people who are not able to smell/taste chemtrails, have physical reactions, some severe. These reactions always occur in sync with strong plumes.

The most common, non-severe reaction that I witness is tiredness in response to the Inflammatory additive. When this additive is strong, people all yawn and get very tired within minutes of each other. I have witnessed this response for many years.

Barium is one of the common components in chemtrails according to numerous tests by many, including professionals in the industry. Barium induces heart issues - including heart attacks - by rapidly depleting the body of potassium. You can read details here:

My Chemtrail Heart Attack




December 29

Overnight: Typical ambient levels, but with a couple very early morning plumes and late plumes (see yesterday's entry) as well. Ambient type in the air is the usual Model Cement type with the Inflammatory and Mercury additives.

~5:20 am - We were hit with a very strong Model Cement type plume with the Inflammatory and Mercury additives. Intensity peaked at 8.5.

~7:30 am - Another Model Cement type plume, same as previous. Peaked at 8.25.

9:20 am - Another Model Cement type plume, peaked at 8.25.

~ 11 am - Hit with another plume of type Model Cement with the Inflammatory and Mercury additives. This was likely a layered plume (they are doing this a lot lately) because this plume is still in the air as I type this (12:19 pm). Stay strong. Detox continually because you are being "toxed" continually. Glutathione, NAC, and vitamin B12 are your friends.

12:53 pm - We are still under the previous plume. They have, several times in the past months, layered plumes so that they stayed consistent in the air for hours or for most of the day. Is that what they are going to do today? The air now is horrible at about intensity 8 with the Model Cement type with Inflammatory and Mercury additives.

6:51 pm - Got hit with a few plumes this afternoon but didn't record the times.

Now, we were just hit with a very strong, fast-rising plume of type Model Cement with very strong Inflammatory and Mercury additives. This is typical for the evenings, namely, that additives are particularly strong. Intensity it currently 8.75 and rising.

8:26 pm - Just hit with another plume of type Model Cement with the Inflammatory and Mercury additives. Intensity is rising but is currently at 7.75.

8:38 pm - The intensity of the previous plume is now 8.5 and may be at its peak. The largest crime against humanity continues day-after-day.

10:50 pm - Getting hit with another Model Cement plume with the Inflammatory and Mercury additives. Intensity rising fast and is now at 8.





December 28

Overnight: Medium intensity night staying around 7.5 with typical Model Cement type.

~5 am - Woke up to a strong plume of type Model Cement type which peaked at 8.25.

8:08 am - Woke up again to same time of plume which peaked at 8.5

9:40 am - Hit with another plume. Intensity rose slowly and peaked at 9.25 at 10:02 am. Type is Model Cement once again.

12:39 pm - The air has been bad all day not dropping below intensity 7.75, and that, only briefly. Right now intensity is 8.5 and type is Model Cement with the Inflammatory and Mercury additives.

1:17 pm - Just hit in the past 10 minutes with a plume of type Drywall Dust with very strong Mercury additive. Intensity is 8.75 and rising. Mercury symptoms are soaring. The Drywall Dust Chemtrail type.

3:21 pm - Just hit with another plume of type Drywall Dust with the Mercury additive. Intensity is rising as I type this.

12:08 am - Spent the afternoon and evening in Bangor. I didn't record the times of the early afternoon plumes, but later in the afternoon, we were hit with several strong plumes:

~ 4:15 pm, ~ 7:30 pm, 9:36 pm - The type of plumes were Model Cement and they were all very strong ranging between 8.5 and 9.5.

It's now 12:14 am (12/29) and the air is typical for nighttime. Intensity is 7.25+.

I hope it stays "mild" tonight. Goodnight.

12:23 am - Well, I just finished making the entry above, and just minutes later, we got hit with another plume. It's now 12:24 am and a Model Cement plume just hit us. It has the Inflammatory and Mercury additives. Intensity is rising at a medium speed. Spraying the public with known poisons is a history crime against humanity, but this is only the beginning of the things you will soon see.The world has been so apathetic that it has provided globalists the opportunity to take over everything.

Want to know they own? The answer is here: Who Owns The World?




December 27

Overnight: Intensity ranged from 7.5 to 7.75 with the Model Cement type.

At 5:11 am I was awakened by a strong Model Cement type plume with the Inflammatory and Mercury additives. Intensity peaked at 8.5.

At 8:08 am were hit with another plume of the same type. Intensity peaked at 8.5 but the plume was short-lived lasting (detectable) for only about 30 minutes.

At about 9:20 am +/- we were hit with another plume of the same type that peaked at intensity 8.75.

10:24 pm - This last plume was clearly a layered plume because it still persisting at a raised intensity of 9.5.

Layered plumes are sprayed in succession between 1 and 30 minutes apart to keep the air intensity toxic for a longer stretch of time. This certainly will increase bodily harm by no allowing the body a span of time to recover between plumes. Layering began roughly in late 2019 when overall average spray intensity increased dramatically.

Portland: The Big Picture

On our way to Portland, as we left the house, the air was horrific. We passed through Bangor about 12:15 pm and the horrible air continued. Type was Model Cement with the Inflammatory and Mercury additives. Intensity was 9.5+ (extreme). I was wearing a wet mask which became saturated within minutes.

I spent most of the day near Portland, Maine (Cumberland) today, hence the big time-gap in logging above. Air was typical, but the real story begins on the ride home. I began home at about 6 pm. When reaching Augusta (the capitol of Maine), I began tasting a Pharmaceutical type plume that was strong. Intensity was about 8.5. It made both Laura and I feel very sleepy, which is one of the known effects of this plume type. This type persisted all the way into Bangor and even home.

Once again, when about 5 minutes from home, I detected a metallic type in the air that was not in the air for the entire trip. This is typical when getting within about 5 minutes of my house and this has been the pattern for many years. Typically, the prevailing type being sprayed continues over my home area, but this metallic type become detectable within 5 or 10 minutes of my house.

In case you don't already know: Biden Drops Out of 1988 Race for Lying and Plagiarism.

Biden is an openly-self-proclaimed globalist which means that he is dedicated to reducing the U.S. to third-world status, yet there are some Americans that still support him, although the numbers are much fewer than mainstream media would try to make you believe:



Full Story: YouTube Disables "Dislike" Button After Biden "Dislike Disaster"




December 26

Overnight: Average-to-mildish night of spraying. Intensity ranged from 7.25 to 7.5. It began at 7.5 and seemed to dissipate to 7.25 later in the night/morning.

We were hit with the first plume at roughly 10 am. Type is Model Cement with some Inflammatory and Mercury additive. Intensity is now 7.75-.

Have you seen what has happened in the past few days? Spraying was much stronger during holiday days and the night before. This is yet another pattern that I have been reporting for years. I talked about the "holidays-are-sprayed-harder" phenomenon a few days ago in the log (see below).

I hope you have a good day despite the ongoing attack against all life.

I will share with you one of my favorite videos:

What Vaccines are Doing to Your Body

11:48 am - We were hit with a strong plume of type Model Cement at about 11:30 am. Intensity rose fast indicating a low-altitude release. Intensity peaked at 8.5 and is now 7.75. The short duration of this plume indicates that the plume landed on us having already partly passed by horizontally before reaching ground level.

6:01 pm - At about 2 pm and then again at 4:30 pm we were hit with a very strong plume of type Model Cement which peaked at 8.5 and 9 respectively. Both plumes included the Inflammatory and Mercury additives as usual. It's been about 2 hours since the last plume so I wonder if we'll have another soon.

6:14 pm - Just as I said a few minutes ago, we were going to be hit soon. It happened. Just a couple minutes ago we were hit with another plume of type Model Cement with strong Inflammatory and Mercury additives. When will this attack against you, and I, and all life end?

6:25 pm - The last plume is now at intensity 8.75. May God help us. Only He knows how many have died from this already. I know people will be shocked and horrified when the truth is finally believed. I don't say, "When the truth finally comes out", because the truth is already out. Change will come when the truth is believed.

12:14 am - The evening has had no discrete plumes except one earlier (I didn't record the time) that had very strong mercury additive, but now, we are being hit with a Model Cement type plume with the Inflammatory and Mercury additives. They have really been pouring on the mercury additive heavy for weeks.



December 25

Overnight: Another bad night of spraying. Intensity ranged from 7.5 to 7.75. Type was Model Cement with Inflammatory and Mercury additives. Once again, mercury was very strong with strong symptoms apparent in the morning.

Spent the day in Bangor, so all remaining entries for today apply to Bangor only.

From before noon (driving into Bangor) and onward, intensity was 7.75 to 8.25 Model Cement type with Inflammatory and Mercury additives.

In the mid-afternoon, we were hit with a very strong Biologic plume with Model Cement and very strong Mercury. About 15+ minutes after the hit, an older family member began having low blood sugar nausea and vertigo.

I have seen symptoms from chemtrails appear shortly after strong plumes for many years. There are no surprises here except that typical folk do not want to consider even the idea that chemtrails could be the cause, despite the years of temporal correlation between plumes and symptoms.

In the late afternoon intensity fell back with the Model Cement type and mild biologics at intensity 7.25 for a couple hours. I felt so much better during this time.

In early evening we were hit again with Biologic and Model Cement plumes all the way home with intensity back up to 8 to 8.5 over this entire drive.

When approaching my home, about 10 minutes out, Laura got a sudden headache. About 2 minutes later, I detected Copper and Aluminum type plumes in the air which. Shortly after, I began having all the usual symptoms. Laura has because so sensitive to certain chemtrail types in the past couple years that she now (usually) feels symptoms before I detect them in the air.

I have reported for years (since 2010 in fact) that spraying within 5 to 10 minutes of my house is virtually always stronger by 0.5 to 1.0 point(s) and contains one-or-more metal components that does not exist farther out from my house. I'm simply reporting the truth. Why spraying is always stronger over my house is an interesting phenomenon and I'll leave up to the reader to speculate.



December 24

Overnight: Intensity through the night ranged from 7.5 to 7.75. Type was Model Cement with Inflammatory and Mercury additives. The Mercury has been so strong for weeks now that I wake up with ringing in the ears every morning. Laura is having the same experience.

See What causes ringing in the ears?

See How I Stopped Ringing In The Ears Overnight

First plume of the day was at about 6:25 am. Type was Model Cement with the Inflammatory and Mercury additives. Intensity rose at a medium rate and peaked at 8.25.

Second plume of the day was first detected at 8:50 am. This is a slow-rising plume that peaked at about 9:10 am at intensity 8.75. It's now 9:21 am and the intensity has fallen to 8.25. All the usual symptoms that are induced by this poison were and are being experienced.

See New Data: The Jab Is KILLING 15 People To Save 1

12:43 pm - We were hit with a plume of type Barium about 12:30 pm. Intensity peaked at 8.5 and is not at 8.25. I expect holidays to be intensified and it has already begun.

What a world we live in being sprayed by our government with known poisons. What are they spraying? Mercury. Here's the study that proves it:

Contamination of the Biosphere with Mercury

I have been saying this since 2005, long before this study came out. I based that conclusion on the very specific symptom set that chemtrails cause us to have. I am very familiar with mercury symptoms because I was severely poisoned by my mercury-amalgam dental fillings, which are deceptively called "silver fillings". I have studied mercury toxicity in depth.

See My Mercury Story

10:23 pm - This afternoon and evening I spent in Brewer, not far from home. The afternoon continued with much the same.

Tonight was a different story. At 6:30 pm were were hit with a plume that was a powerful mix of Biologics, the Inflammatory additive and the Mercury additive.

The Biologics rose in intensity at a medium rate. It peaked at 8.75 and caused symptoms that I will not mention at this time.

The Inflammatory additive peaked at 8.5, but the real story is the Mercury Additive. This additive peaked at 9.75 and lasted until 8 pm when it began to dissipate. Mercury symptoms were off-the-charts, and this is NOT unusual for holidays.

Mercury rapidly alters hormones, enzymes, and neuroregulators. It causes a rapid change in personality towards hyperactivity, emotional impulsiveness, and the amplification of fears. These effects stress relationships and divides families. Is this the reason they use it so heavily during times of family gatherings? After all, the primary power of globalists lies in their ability divide those they wish to conquer.

"But this you have, that you hate the deeds of the Nicolaitans, which I also hate." -Revelation 2:6

nico means to conquer
liatians means the common people; the laity.

The deeds of the Nicolaitans are the conquering of the common people. This, God hates.

"...For your merchants were the great men of the earth, for by your sorcery all the nations were deceived." -Revelation 18:23

See Explanation of Revelation 18:23

10:58 pm - We were just hit with another plume. Type is Model Cement with the Inflammatory and Mercury additives. Intensity is rising quickly.



December 23

Overnight - Typical night of ambient levels of fallout. Intensity was about 7.5 through the night (based on the times I was awake).

7:26 pm - The first 3 plumes of the day were the same type at the following times based on the time they were first detectable:

7:11 am
8:11 am
9:01 am

All plumes were of type Model Cement type with the Inflammatory additive and particularly strong Mercury additives. The Mercury additive has been stronger than usual for the past several days.

I spent the afternoon in Bangor. The Model Cement type was present all day at intensity 8. I drove all around Bangor and the intensity was consistent within 0.25 points.

it's now 7:30 pm and I'm home. The Model Cement plume hit us about 20 minutes ago. Intensity is now 8.5.

The intentional poisoning of all life continues.

By the way, I woke up (again) at 8:11 am because of the intensity of the plume. Laura woke up at 8 am. We have different bedrooms as we are not in a relationship (as some people assume). It is a frequent occurrence that we both wake up within 10 to 15 minutes of each other when a plume is the reason for me waking up. I have no doubt that countless people suffer from sleep issues but have no idea that chemtrails are the cause for one simple reason: They cannot smell them.

See Smelling and Tasting Chemtrails

8:19 pm - Just hit with a fast-rising Model Cement type plume with the Inflammatory and Mercury additives. Intensity is already at 8.25 and rising fast.

8:52 pm - The previous plume is now at 9.5 - very intense. The horrible spraying that globalists are doing is terrorism. Those who think this thought is sensationalism truly do not understand the damage they have already done and the lives that have been lost from the day-to-day exposure to these known toxic metals and poisons. Mercury is the globalists' favorite poison, and is it a terrifying poison.

See List of Diseases Associated with Mercury



December 22

Overnight: Mildish night of spraying until about 5:15 am. Overnight intensity was 7.25+

11:20 am - So far today, we have been hit with 3 nearly identical plumes of type Model Cement with the heavy Inflammatory and heavy Mercury additives. Time for each plume was ~5:15 am, then 7:23 am, then 9:31 am. Times are based on first detection.

Notice that plumes are about 2 hours apart. This is perhaps the longest standing pattern that persists. I'm not saying that all plumes are 2 hours apart. Usually during special events such as holidays or approaching storms, the timing changes dramatically as well as the types used, but as far as day-to-day spraying is concerned, the 2-hour interval has been a general pattern since the beginning.

12:26 pm - We were hit with a plume at 12:15 pm. As far as the 2-hour interval goes, this one was a little late, but against, that's not unusual. Plume type is Model Cement. Intensity is currently 7.75 and rising at a medium rate. The attack on all life continues.

10:39 pm - This afternoon/evening we have had 4 or 5 plumes at fairly even intervals. They were all of the type Model Cement.



December 21

Overnight: Typical night. Intensity was about 7.5 with the typical ambient mix of the Model Cement type with the Inflammatory and Mercury additives.

11:17 am - At about 8:15 am we were hit with a very strong Model Cement type plume with the Inflammatory and Mercury additives. This plume peaked at 8.5 and took about an hour to subside.

We have had some of the Sedative-Stimulant type in the air this morning, but like recent mornings, it has been at a low level.

10:41 pm - It's been a mildish day today. Since before noon we have had no discret plumes, only background poison at intensity 7.25 all day. I wasn't until 10:15 pm tonight that we were hit with a plume of type Drywall Dust with very strong Mercury additive and strong Inflammatory additive. That plume is 75% dissipated now.

My Facebook account was "restricted" today meaning that my posts will be placed low on the feed. Facebook cited 5 posts that were the offending posts that contained false information, yet none of them contained false information.

One of the links they removed and cited was a link to the Remdesivir warning video showing that, this treatment mandated by Fauci, killed 54% of those in a study and damaged most participant's kidneys and other organs. This, YES THIS, is the very same study that Fauci cited as demonstrating Remdesivir's safety (link: https://gsw.bz/rem - share it far and wide). Is there any greater irony? Have you noticed how they turn everything literally upside-down and backwards?

Liars they are, and one day soon they will pay for the horrors they have done. Most people still have no idea how intimately globalists have impacted their lives and health and the health of those they know and love. Mercury is their favorite poison, and they have spread mercury as far and wide as their lies.

[Linked Image]

This link shown above (https://gsw.bz/rem) does not contain false information. It contains life saving information that everyone needs to know. The truth is dangerous to criminals and liars, and this is the real reason Facebook and all the globalists' platforms work in concert to conceal it.

The link that Facebook blocked contains 2 videos. This is one of them. I think you'll agree that access to this information could save lives:



See Mystery Babylon by William Cooper

See New Study: Diseases Declined Long Before Related Vaccines Implemented



December 20

Overnight: A mildish night of spraying. Ambient levels were between 7.25 and 7.5 throughout the night.

8:55 am - Beginning at about 7:30 am, I sensed a very slow rising Model Cement type plume. If you look back over this log, you will see that this is a very common pattern for months now. Right now (8:59 am) intensity is 7.75+.

Keep in mind that the low-level, continuous biologics that began in our area in February, 2009 continues to this day. I don't mention this daily in the log to save space, but I occasionally mention it as a reminder that this horrific part of the chemtrail program continues day after day.

How Globalists Explain Away Viruses Falling From the Sky

None of this insanity has to be this way. If only people were willing to work together dedicating a little time to keeping their government free of corruption. But now, the corruption is complete occupying virtually every position to the very top. There is nothing now but and act of God that will change this, so now I hope everyone will pray as if everything depends on God, and work as if everything depends on them.

How long will you wait, dear people? How long?



10:49 am - The previous plume (8:55 am) has leveled off and declined a little, however, we have had biologics in the air (above the "normal" background levels) for a few hours now. Intensity of this type is holding at 7.5. Normally, the background level is between 6.5 and 6.75 and stays pretty steady.

Afternoon - The entire afternoon hovered between 7.5 and 7.75 in intensity. I saw medium-altitude, non-persistent plumes being created but only a few persistent plumes in the sky. We had some of the Sedative-Stimulant type in the air for a few hours.

6:26 pm - We were hit with a Model Cement type plume a few minutes ago. Intensity is rising quickly and is already at 8.25.

10:20 pm - We were hit with a very strong Model Cement type plume at about 9:45 pm. The plum rose in intensity very quickly and peaked at 8.75. It was short-lived and dissipated within about 25 minutes. This indicates a low-altitude plume which landed on us after it had already moved mostly past us.

11:55 pm - For years, the Inflammatory additive always occurred with a "type". This is why I call them "additives". They always occur with another type.

For the past few weeks, the Inflammatory additive seems to have been used without a type. It's happening again tonight. For the past hour or more, the inflammatory additive has been in the air but without a companion "type". I'm mentioning this because is seems like a significant change in pattern. If nothing else, it is interesting. Those spraying us seem to put a lot of emphasis on inducing inflammation, especially heart and lung inflammation.

12:16 am - We were just hit with a plume of type Model Cement with the Inflammatory and Mercury additives. Intensity is rising at a medium rate and is now at 8.




December 19

Overnight: Type was residual Sharp Metallic with a hint of the Copper type and Model Cement type. Intensity was 7.5+ every time I woke up.

11:44 am - We were hit with the first plume of the day at about 11 am. Type was Model Cement. Intensity rose quickly so that it peaked in about 10 minutes. This indicates a low altitude release. It dissipated within 20 minutes indicating that we were only hit with the edge of it as it travelled laterally.

4:13 pm - We has a very strong Model Cement plume at roughly 2 pm. It peaked about 8.5.

5:09 pm - Just now getting hit with a fast-rising plume of type Model Cement.

The remainder of the evening we had a few plumes of type Model Cement. Plumes were basically on a 2-hour schedule as usual. In short, it was a typical evening of spraying.



December 18

Overnight: Type was residual Sharp Metallic with a hint of the Copper type. Intensity was 7.5+.

11:30 am - First plume of the day was detected about 5 minutes ago (11:25 am). Type is the Sharp Metallic type with the Copper type with some Inflammatory and Mercury additives. Intensity is rising at a medium rate and is currently at 7.75.

Black lights being installed in street lights of major cities. Why? Likely to detect the unvaccinated. They will create other narratives to "explain it away", but in the end, it benefits the globalists' agenda which is never, never good for you.
https://www.youtube.com/watch?v=UHsfjh0qAwY

2:53 pm - We were hit with a slow-rising plume of type Sharp Metallic with the Copper type over 30 minutes ago (~2:15 pm). Intensity is about 8 as I type this. Horrible.

3:14 pm - The previous plume has kept increasing and is now at intensity 8.5. It is horrible. We are both wearing Wet Mask to protect ourselves from this epic crime against humanity. Please get involved and share this information everywhere.

3:31 pm - 5 minutes ago we were just hit with a plume of type Model Cement. Intensity is rising quickly and is now already at 8.75. We can assume this was a low altitude release due to it's fast rise time.

One day the world will learn that 95% of modern disease was caused intentionally by globalists.

3:38 pm - The previous plume's intensity is now at 9.25 and still rising.

5:40 pm - The air finally did clear from the previous plume, but 10 minutes ago (5:30 pm) we were hit with a plume of type Sharp Metallic with Copper with the Inflammatory and Mercury additives. Intensity has already risen to 8.5 and is still rising. We have snow coming in tonight, and although they have sprayed the Barium type in front of rain or snow for years, there were a few times in the past few years where they used this type instead. Now, it seems this type/mixture may be becoming the type they will be using in front of precipitation.

I only wish I could get a group of people to try a wet mask with a drop of peppermint. Once you try it at the right time, you will get to smell what I smell/taste in the air all the time. The mask becomes saturated with the odor of this poison and finally people may realize how often they are breathing this. Here is a link on how to make a wet mask.

7:25 pm - At 7:15 pm we were hit with another Model Cement type plume. Intensity is now 8.25 and rising.

10:05 pm - We're just now getting hit with another plume. Type is Sharp Metallic with the Copper type and the Inflammatory and Mercury additives. Intensity is rising at a medium rate.

11:01 pm - We are being hit with another plume now. Type is Model Cement. Intensity is rising.


December 17

Overnight: A particular strong night of spraying. We were hit with the Model Cement type plume at roughly 3:30 am and then again at about 5 am. At the time I was awake, they peaked at 8.5.

7 am - We were hit with another plume at about 6:45 am. Type is the Sharp Metallic type. The Inflammatory and Mercury additives are also present to a lessor degree.

8:43 am - The previous type is still in the air. It never dissipated, so this indicates multiple, layered releases. Intensity right now (8:46 am) is 8.75 and rising at a medium rate.

9:53 am - Hit with fast-rising plume of type Model Cement just a few minutes ago. Intensity rose to 8.25 rapidly and and already declining. Why declining so quickly. First, it's a low-altitude release which causes rise and falls times to be fast. Second, the plume only lasted a short time because as it descended, only the "corner" of it descended on us as it was moving sideways from the wind. If you can image this motion in 3D it will be easy to see.

Perhaps someone reading this who is fluent with Adobe After Effects or Illustrator or some similar software would like to create an illustration. Feel free to contact me.

10:16 am - We were just hit with another fast-rising Model Cement plume. Intensity is now 8.25. This is what I call a "layered release". This is when 2 (or more) aircraft release aerosols within minutes of each other. I have seen many chemtrail jets here flying in loose formation with 1 jet flying perhaps 1/2 to 1 mile behind the other. This has become very common in the past 2 years here.

1:39 pm - The air not cleared to "normal background" levels today. As I type this, the air is saturated with the Sharp Metallic type with a touch of the Copper type. Intensity is 8.75.

Just a note about background levels. The air never clears anymore. For the first year that I experienced chemtrails, the background levels would dissipate between plumes so that I could not smell or taste them between plumes; not at all. As the first year of spraying continued, the "space" of clear air between the plumes shrunk. By the end of the first year of spraying (in the area I lived in, Jamestown, NY), I could smell and taste them constantly with no break between plumes.

Furthermore, over the years, the "between-plumes" intensity rose. Now, the between-plumes intensity is 7.25, which is much higher than is used to be.

4:15 pm - Still, the air has not cleared to "normal" background intensity (7.25) since the previous post. We were just hit with a plume of type Model Cement with the Inflammatory and Mercury additives. Intensity is rising quickly and is already at 8.25.

So here's another pattern I've noticed over the months. This is not 100% consistent, but I would say roughly 75%. Friday evenings are sprayed harder than the rest of the week's evenings. Do you find that you feel a little worse on Friday late-afternoons most of the time? Again, not a 100% consistent pattern, but one worth noting.

4:29 pm - It just keeps getting worse. The previous plume intensity is now 9.5; extremely intense. When it gets this strong I can actually feel the irritation on the surface of my eyes. The historic attack against humanity continues while half the population still doesn't even want to know.

11:49 pm - Had a few more plumes hit us tonight. They were not as intense as earlier. Between 5 and 10 pm we had a couple plumes of type Sharp Metallic.

At about 11:35 we were hit with a Model Cement type plume. It's in the air as I type this at intensity 8.25 and still rising. It has been a horrible few days of spraying. I don't know what else to say. This should not be happening. It's only being allowed to happen because too many don't want to face difficult truths. The problem is, difficult truths rarely get easier with time.

12:05 am - The intensity of the previous Model Cement type plume has risen to intensity 8.75.

The attack on all life continues.

1:43 am - Just hit with another plume of type Sharp Metallic. This plume is rising slowly and is currently at intensity 8.



December 16

Regarding yesterday's onslaught of spraying (see previous post), we got a bunch of snowfall in the evening that covered everything. Before that there was no snow on the ground.

Overnight: After a spraying holocaust, we had a mildish night. Intensity through the night was 7.25.

First Plume: The morning as been 7.25 until now (10:29 am). We were just hit with a Model Cement plume which is rising in intensity at a medium rate and is now at 8. Here we go.

How dangerous are chemtrails? This is the story of My Chemtrail Heart Attack.

This was a bad day of spraying. We had several, very strong Model Cement type plumes.

In the evening at about 8:30 pm, we had another very power Model Cement plume with the Inflammatory/Mercury additives that peaked at intensity 9.5. If you look over this log, you will see that this is a common pattern, specifically, that we are hit with very strong plumes containing very intense Inflammatory additive between 8 pm and midnight every night.

At roughly 11 pm, we were hit with another Model Cement plume that peaked at 8.25.



December 15

Overnight: After the last plume dissipated (about 1:30 am), intensity through the night hovered between 7.25 and 7.5.

First Plume: Are you seeing the patterns? The first plume today was, once again, detected just after 7:30 am. Type was Model Cement. It increased in intensity very slowly over a long period of time and never fully dissipated.

Another plume hit us about 15 minutes ago (10:15 am) and continues to increase in intensity as I type this (10:33 am). Intensity is now 8.75 and still increasing. Is it going to be another one of these days?

Here's a little information about how altitude plays a roles in how plumes "appear" at ground level:
Edge Resolution: How To Determine Chemtrail Release Altitude

1:34 pm - Well, what an afternoon this has been so far.

The sky was perfectly clear; beautiful, not a cloud in sight.

Beginning at about 12 noon until 1:15 pm I was cooking. While at the kitchen window, I watched about 30 jets inundate the sky. Some in loose formation. Often 3 to 5 jets visible at the same time.

They converted a perfectly, 100%-clear day to a completely overcast day in just over 60 minutes.

Spraying was at medium altitude, so about 1 pm I began smelling and tasting the metallic/chemical fallout from this epic crime against humanity. This makes perfect sense because medium altitude releases like this typically take 60 to 90 minutes to reach ground level.

As the particulates descended, they passed into the warmer layer of air inducing condensation clouds that that were saturated with petroleum (oil) rainbows. This is what they looked like. This is indicative of 2 types of chemtails: The Model Cement type and the Acetone type. The Model Cement type is used virtually every day. The Acetone type has not been used in this area for years. The petroleum rainbows are not water rainbows. They refract light much more towards the purple creating an "oil in a puddle" type of rainbow.

They enable the spraying perhaps a mile east of where I live. In the pictures you can see the sharp line in the sky where the artificial overcast clouds begin. In that area and eastward, the sky remains perfectly blue, but over our heads onward towards Bangor, which is west of me, the sky is completely overcast.

Words cannot express how absolutely sick and tired I am of public apathy towards this crime against all life, so I won't even try. I'm simply including the images below to illustrate what they have done to the skies, not to mention what they are doing to all life on the ground as this poisons falls.

As I type this (2:01 pm), the air is full of the Model Cement type at intensity 8 and still rising.


The first image through the screen.. This is just to provide scope to show how massive these trails become within about 3 to 5 minutes of being released.

[Linked Image]

Here you can see new trails and ones that were laid down about 7 to 10 minutes earlier that are spreading out. This entire process of covering the sky happens pretty quickly.

[Linked Image]

Here you can see a closeup of the plumes spreading out.

[Linked Image]

I noticed a few plumes at high altitude being released as well. You can see one here near the center of the image.

[Linked Image]

[Linked Image]

This is how the sky looks after about 45 minutes of heavy spraying. We are entering overcast conditions.

You will also notice a vertical refraction node just above the sun. This is common with this type of chemtrails. You can see more of this phenomenon here, which is unique to chemtrails and does not occur with water vapor. Please don't ever forget that last sentence.

[Linked Image]

These last 4 images are looking east. You can clearly see where they started spraying. They turn their spray mechanisms on just east of where I live and then continue over my house and into Bangor, which is west of me.

As I type this, the sky above my house and westward is completely overcast. The sky eastward about a mile away onward is clear, except for the typical faint white haze that persists after chemtrails dissipate.

Keep in mind that the entire sky was perfectly clear, without a single cloud, just 70 minutes before I saw the first chemtrail release.

[Linked Image]

[Linked Image]

[Linked Image]

[Linked Image]

9:54 pm - This afternoon and evening continue to be intense. In short, we were hit with several very strong Model Cement type plumes that rose between 8 and 9 in intensity. About 9:30 pm we were hit with the same type again but with the Inflammatory and Mercury additives. See that pattern? Every night they hit us hard with the inflammatory type. This normally takes place between 8:30 and midnight. Right now air intensity is 8.25.

I hope you take a moment and share this log with someone you know. Thank you for helping get the truth out.



December 14

Overnight: After the Model Cement type dissipated last night (11 pm ish), the air remained at a milder-than-usual 7.25 throughout the night.

First Plume: Our first plume today was at about 9 am. It rose at a medium rate to a peak intensity of 8.5 at 9:50 am. As I type this, it's dissipating and is currently at intensity 7.75. Type was Model Cement with the Inflammatory and Mercury additives.

Here is a good video that you can share to teach people about Agenda 21: Agenda 21: United Nations Population Reduction

Typical day, so I won't elaborate.

We had our usual dinner break.

Tonight at about 10:30 pm we had a very strong Model Cement with Intensity Inflammatory and Mercury additives hit us. Intensity rose to 9 in about 12 to 15 minutes. Veins were standing out of our arms, along with all the other usual symptoms these poisons cause.

It's now 11:19 pm and intensity has dissipated a little to about 8.5, so it's still pretty intense. My wet mask has been on and already wreaks with the odor of nail polish remover (toluene). This is the odor that is caught in a wet mask with the Model Cement type.

The attack against all life continues.

Another post to share if you like: A Leading Cause of Death Media Ignores

It's 11:38 pm and we were hit with another plume a little bit ago. The type is the same. Intensity had dropped down to about 8.25 but it now back up to 8.75.

The inflammatory additive with mercury induces asthma-like symptoms. There is no doubt in my mind that THIS is the reason asthma has become the most common disease among young people in the past 10 years.

The previous plume lasted through to about 1:30 am.


December 13

Overnight: Model Cement type through the night. Intensity ranged from 7.25 to 7.5.

Today we had Biologics all day. Went to Portland. Biologics got stronger as we headed south on 95 towards Augusta. Biologics peaked at 8 but dropped off as we approached Cumberland.

Biologic continued throughout the remainder of the day from Cumberland back to Bangor at intensity 7.5.

Got back home. At about 8 pm, after the usual evening break, we had Model Cement plume hit us that quickly rose to intensity 9.75. It dissipated after 90 minutes.

It's now 10:20 pm and type is Model Cement and intensity is between 7.25 and 7.5.

Did you know mercury blocks the production of Secretory A, which is your first line of defense in your immune system in the gut. Learn more: https://gsw.bz/mercury



December 12

Overnight: Worst than normal night of spraying. Type was Copper and Barium with Mercury additive. Intensity after about 1 am ranged from 7.5 to 8. Woke up with very strong mercury symptoms.

Later, but before sunrise, intensity decreased to 7.25.

Morning: Type was Copper and Barium with Inflammatory additive. Intensity ranged from 7.5 to 8.25.

Afternoon: Horrible. Copper with Inflammatory additive and Biologics. Intensity ranged from 7.5 to 8.75.

Evening: This intensity and type continued into the evening. Our typical break occurred at about 7:30 pm.

At about 9:45 pm we had a very intense Model Cement plume. Intensity rose very quickly rising to 9.75 in about 10 minutes. Plume remained at peak for about 30 minutes then decreased.

It's now 10:26 pm and another, slow-rising plume is hitting us. Type is Model Cement with Inflammatory and Mercury additives.

How many must get sick or die over the years of this slow, continuous onslaught of inflammation-inducing poison before people are willing to stand up and stop this historic crime against humanity.

"But this thou hast, that thou hatest the deeds of the Nicolaitans, which I also hate." (God speaking) -Revelation 2:6

"And the nations were angry, and thy wrath is come, and the time of the dead, that they should be judged, and that thou shouldest give reward unto thy servants the prophets, and to the saints, and them that fear thy name, small and great; and shouldest destroy them which destroy the earth." -Revelation 11:18

Who are they who destroy the Earth? Do they do this sitting on horses shooting bows and arrows?

No. This is a reference to modern technology. Spraying the entire world with poisons qualifies for "destroying the Earth".

See: "...by your drugs and poisons were all the nations deceived."

It's now 10:43 pm and the current plume is now at intensity 8.75. There are no words for how I feel watching so many continue to ignore this historic crime against humanity. It's now 10:46 and intensity has climbed to nearly 9.


December 11

Overnight: They sprayed the Barium type throughout the night. This makes sense because it raining today and as you may know, they always spray this type before precipitation.

11:28 am - The same pattern continued throughout the morning. They are spraying the Barium type. No distinct peaks have been detected, but ambient level continues at a steady 7.5 intensity as it was throughout the night (based on the numerous times a wake up).

2:4 pm - They have been spraying the Barium type with the Copper type combined with the Inflammatory additive very strongly for the past few hours. Intensity has peaked and stayed peaked at 8.75. It's horrible.

I feel for all of those with asthma because, in my observation, they suffer when this type is sprayed. This is why is obvious that this is the cause of their asthma.

See Chemtrail Induced Illnesses

5:42 pm - We were hit with a Barium/Copper plume at about 4:30 which rose to 7.75. At 5:35 pm we were hit with another plume of the same type. It's been just a few minutes and it's already at intensity 9. The crimes against humanity that I have seen in my life are unbelievable.

9:10 pm - We had our usual "break" between about 7:15 pm and 9 pm, but now we just got hit with a very fast-rising Inflammatory/Mercury type plume. This type causes inflammation and mercury symptoms like ringing in the ears. This type of plume causes predominantly heart and lung inflammation so I'm sure those diagnosed with "asthma" are feeling it.

It's 9:20 pm and the intensity of the previous plume is now at 9.25. Horrible, lung-crushing, symptom-inducing, crime against humanity and all life. If it relies on the air, it's affected.

A video to share: http://gsw.bz/soils


December 10

Overnight: Bad night of spraying. Intensity maintained between 7.75 and 8.25. Had many mercury symptoms because they were spraying the Copper type which induces symptoms identical to mercury exposure.

The Copper Type

The intense spraying continued and is happening even now with intensity currently at 8.

Do you urinate frequently during the night? This is a symptom of mercury exposure. The kidneys release water in an effort to protect itself from an exposure to toxicity (it is believed). When I had amalgam fillings, I was eventually having to get up 5 times each night to use the bathroom. When my fillings were removed, this stopped completely overnight (yes, overnight) and I never had to go during the night anymore. When chemtrails began, this pattern began again increasing gradually over time. Now, on harsh spray nights like last night, I was up 4 times. When spraying is milder, this will reduce down to 1 or 2 times.

You can read more here: My Chemtrail Story

4:27 pm - Been getting Copper type plumes all day. Just now got hit with the Sedative-Stimulant type. Intensity is rising at a medium rate.

5:41 pm - We were hit with a biologic plume at about 4:50 pm. It was not super strong but rose to about intensity level 8 for a bit, then subsided over the past 40 minutes. It's still detectable a little as I type this.

I have found that the intensity of biologic plumes has been lower but much more common since the jab was widely distributed. For those who know what is going on, this makes sense. Here's a hint for those who don't know. The jab suppresses the immune system.

6:55 pm - We were hit with a Copper type plume about 30 minutes ago (6:25 pm). Intensity rose gradually and peaked at 8 which is where it is now.

11:38 pm - Before 9 pm we got hit with a Copper type plume. Intensity peaked at 8.25. At about 11:35 pm we got hit with a Phosgene type plume. This is a type we had not seen for quite a long time, however, we have been hit with this type a few times in the past couple weeks. This is how it works sometimes. You don't experience a particular type for some time, them it suddenly comes back for a while.

The Phosgene type is an oddity among all the trail type. It's light, aromatic scent seems almost harmless and grassy, but headaches and strange, focused body pains soon follow. The wet mask is somewhat effective against this type.

See The Phosgene Chemtrail Type


December 9

Overnight: We had biologics through the night at intensity 7.5.

2:44 pm - So far it's been a bad day of spraying. The Chemtrail type used has been the Model Cement type with the Inflammatory and Mercury additives. Intensity has ranged from 7.5 to 8.5. We had biologics most of the morning at intensity 7.75. As I have mentioned previously, during biologic spraying I often see ambulances here, in rural Maine. I saw one today about 90 minutes ago.

Intensity now (2:47 pm) is about 7.5 with the same type (Model Cement with 2 additives).

A link for you to share if you need to. Here is a Covid protocol that can be used on any social media network: https://gsw.bz/protocol.

8:22 pm - Been a typical day so I'll skip the details. I will say that we had our usual 6 pm to 8 pm break tonight, as usual, but now it's 8:23 pm and a plume hit us about 15 minutes ago. Type is Model Cement with the Inflammatory and Mercury additives. Intensity is still increasing but is currently at 8.5.

I am so incredibly sick and tired of being sprayed like a bug. It has been almost 17 years of enduring this criminal charade.

11 pm - The air has been horrible since the previous plume with no break. The Inflammatory additive is in the air at intensity 9.25 and has been around that intensity the entire time. This is typical for evenings/nights here: We have an evening break, then get hit hard with the Inflammatory type for hours. What a horrific crime against all life this is.

The previous plume persisted until about 12:30 am (Dec 10th). At about 11:50 am it was added to by a Model Cement plume that rose quickly in intensity to about 9 and then dissipated quickly about 25 minutes later. This fast increase in intensity indicates a plume released at low altitude. What a horrible day of spraying it was.


December 8

Overnight: Air intensity was about 7.5 throughout the night. Type was Model Cement/Burnt Plastic type with the Inflammatory/Mercury additive.

Overall: Another horrible day similar to yesterday, except tonight they sprayed biologics. This gave both Laura and I horrible headaches. Could they be spraying spike proteins using some type of patented delivery mechanism? There are several delivery methods that are patented for deliver biologics from jets.

Do you ever just get fed up with the apathy of the public? It's horrific what globalists do to us, and much of the public just continues to take it and resist knowing the truth.

Here is a truth treat for you who took the time to visit this log today. These are amazing videos that should be shared:
https://gsw.bz/liar


December 7

Overnight: Air intensity was between 7.25 and 7.5 throughout the night. Type was Model Cement/Burnt Plastic type with the Inflammatory/Mercury additive.

Morning & Early Afternoon: The dominant chemtrail type so far today has been the Drywall Dust type. This is one of the few types that induce asthma-like symptoms. Intensity now (1:57 pm) is 8.25. The Inflammatory additive is also present.

The Drywall Dust Chemtrail Type

Horrible day of spraying. The type today was mostly Drywall Dust. Later in the day they sprayed the common Model Cement type with the Inflammatory and Mercury additives.


December 6

Overnight: Typical night.

Today has been a pretty bad day of spraying. It's been raining, so naturally they have been spraying the Barium type. They also used the Sedative-Stimulant type during part of the day. This is the type they nearly always spray before and during precipitation.

We had the usual "dinner break" between about 7 pm and 8:30 pm. Air intensity dropped to 7.25, lower than it's been all day.

About 10:15 pm tonight we had a horrible Model Cement/Burnt Plastic type plume with very strong Inflammatory and Mercury additives. Intensity peaked at 8.75.

Link of the day: New Data: The Jab Is KILLING 15 People To Save 1


December 5

Overnight; Medium-intensity biologic spraying last night.

Had a couple strong plumes between 7 am and noon. Type was Sedative-Stimulant.

Clear skies don't mean clear air. Please don't ever forget that.

3:43 pm - We've had several plumes today. The sky is covered with about 6 to 8 plumes that have spread out covering most of the sky now.

The types sprayed all day have been the Sedative-Stimulant type. This type seems to sequester magnesium and induce symptoms, some of which appear to be caused by magnesium depletion.

The Sedative-Stimulant Chemtrail Type

The remainder of the afternoon and evening we had several plumes, all were type Sedative-Stimulant.

Tonight between 10 pm and midnight we had 2 very strong plumes of type Model Cement/Burnt Plastic that has very intense Inflammatory additive. The first peaked at 8.75 and the second peaked at 9.5; very intense.


December 4

Overnight: Chemtrail intensity remained at about 7.5 throughout the night. Type was Model Cement/Burnt Plastic type with the Inflammatory and Mercury additives.

Once again, the recent pattern continues today. At roughly 7 am a Model Cement/Burnt Plastic type plume began rising very slowly. It's now 10:22 am and intensity has risen to 8.5. Another wonderful Saturday of being intentionally poisoned by globalist psychopaths. What will it take before everyone takes notice and gets involved? What will it take? How much longer?

It's now 10:36 am and the plume has become worse. Intensity is 9.25 and is inducing nausea and headaches and other symptoms. What will it take before everyone gets involved in ending this intentional poisoning?

We were hit with another plume at about 12 noon. Type: Model Cement/Burnt Plastic. Intensity is now 8.

We were hit with several plumes this afternoon all of type Model Cement/Burnt Plastic. Intensities ranged from 8 to 8.75.

About 8 pm we were hit with a very strong plume of type Barium with the Inflammatory and Mercury additives. Intensity rose quickly to 9 and then subsided quickly. It's now 8:34 pm and intensity has already dropped to 7.75.

We had a couple more plumes tonight. The last one hit us about midnight.


December 3

Overnight: Intensity through the night hovered around 7.5. Type was Model Cement/Burnt Plastic type.

Do you want to be able to smell what I smell/taste in the air? Please try this:

Prepare a peppermint wet mask and breath through it for a little while. Typically in about 5 to 20 minutes the mask will begin to take on the odor of the chemtrail plume type that is in the air. I think if enough people were willing to try this, it could induce a mass awakening regarding what is being done to us and why so many are sick.

Instructions for preparing a wet mask are here. If you do this, and I hope you do, message me and let me know what you found out:

http://gsw.bz/wetmask

10:58 am - At about 10:30 am we were hit with a Sedative-Stimulant type plume. Intensity is now 8.

4:02 pm - Well, well, this has been an interesting day so far. We've had only Sedative-Stimulant type plumes all day. Since the one this morning (10:30-ish), they have all been mildish (for this time in history) peaking at intensity 7.75.

It's now 4:04 pm and I just detected another one with intensity rising quickly. Hopefully it won't peak too high.

4:54 pm - Just detected biologics in the air. The previous plume peaked at 8.

8:29 pm - We've had a couple plume over the past few hours. The first was another Sedative-Stimulant type. The latest one hit us at about 7:30 pm and was a Metallic-Chemical type. Intensity peaked at 8.5 at about 8:10 pm.

11:10 pm - We were hit with a plume of type Model Cement/Burnt Plastic with the Inflammatory and Mercury additives just before 11 pm. Intensity is rising at a medium rate. Intensity is currently (11:11 pm) at 7.75.


December 2

Overnight: Ambient intensity through the night was 7.5 to 7.75. Type was the Model Cement/Burnt Plastic type.

Morning: It's 11:07 am. The first plume became detectable at about 8 am and rose slowly. It is now at intensity 8.25. Type is Model Cement/Burnt Plastic.

If you look back over the log, you will see that this is the new pattern. It's pretty well defined and occurs on most days. The exception are days where precipitation is approaching. On such days they use the Barium type the vast majority of the time.

2:48 pm - We've had a couple more plumes this afternoon. We just got hit with a Sedative-Stimulant type which is particularly harmful for some people, Intensity is now 8.75 and may have peaked. For more information about this type, see The Sedative-Stimulant Chemtrail Type.

3:30 pm - We were hit with another plume of type Model Cement/Burnt Plastic. Intensity peaked at 8.

Evening: A few more plume hit us throughout the evening. There was a plume of type Sedative-Stimulant and the rest were Model Cement/Burnt Plastic type. Intensity of the strongest plume peaked at 8.5. The Inflammatory and Mercury additives were very strong.


December 1

Overnight: Stronger than usual spray last night. Intensity ranged from 7.5 to 7.75. Type was the typical Model Cement/Burnt Plastic type with the Inflammatory additive.

At about 3:25 am we had a very strong plume of the same type that spiked up to intensity 8.75.

Morning: Interesting day so far. No sharply-distinct plumes. The ambient air has wavered between 7.5 and 8 all morning and through the early part of the afternoon (2 pm). Type has been Model Cement/Burnt Plastic type with the Inflammatory additive. This indicate medium-to-high altitude releases. No visible plumes are in the sky.

If you want to know why there are no visible plumes in the sky in many areas whereas the sky used to look like a war zone. See this article which explains it all:

Plumes Change Overnight

This afternoon we've had more of the same: Oscillating intensity between 7.5 and 7.75 of the Model Cement/Burnt Plastic type.

in the early evening and afterward we've had 2 discrete plumes of the same time having the Inflammatory and Mercury additives.

It's now 10:29 pm and I expect we will have 1 or 2 more plumes tonight.

No sooner said... We were hit with a plume of type Model Cement/Burnt Plastic 5 minutes ago. Additives are the usual Inflammatory and Mercury types. Intensity is rising very fast and is already at 8.5.

What a world we live in; where our government intentionally sprays us with poisons. The world is waking up and lawful justice is coming.

It's now 11:49 pm. The previous plume rose to intensity 9.5 and had very powerful Inflammatory and Mercury additives. This made the veins stick out of our arms and hands. Please wake up world.

Attachments
20211215_120403.jpg 20211215_124954.jpg 20211215_125004.jpg 20211215_125941.jpg 20211215_125635.jpg 20211215_131537.jpg 20211215_132423.jpg 20211215_132425.jpg 20211215_132427.jpg 20211215_132430.jpg facebook-bans-rem-link.png
Last edited by Russ Tanner; 10/07/22 06:08 PM.

Russ Tanner, Founder, Administrator, Programmer
GlobalSkywatch.com
My Chemtrail Story