A bad night of spraying. As you can see from last night's log, they sprayed us intensely until about 2 am. What a nightmare and a historic crime against humanity.
We had a few horrible plume in the early morning:
At about 6:40 am we were hit with a plume of type Model Cement with intense Inflammatory and Mercury additives. The Inflammatory additive was the dominant type. Intensity peaked at 9.5.
At about 8:35 am we had a plume identical to the 6:40 am plume.
12:43 pm
At about 12:30 pm we were hit with a plume of type Model Cement and Chalky-Bitter-Pharma (Lithium?) with Inflammatory and Mercury additives. The Chalky additive is the dominant component. Intensity is now 8.75 and rising at a medium rate.
1:41 pm
At about 1:30 pm we were hit with a plume of type Model Cement and Chalky-Bitter-Pharma (Lithium?) with Inflammatory and Mercury additives. The Chalky additive is the dominant component. Intensity is now 8.5 and rising at a medium rate.
3:04 pm
At about 2:45 pm we were hit with a plume of type Barium and Chalky-Bitter-Pharma (Lithium?) with Inflammatory and Mercury additives. The Barium type is the dominant component. Intensity is now 8.5 rising.
4:32 pm
At about 4:20 pm we were hit with a plume of type Model Cement, Sharp-Metallic, and Chalky-Bitter-Pharma (Lithium?) with Inflammatory and Mercury additives. The Model Cement type is the dominant component. Intensity is now 8.5 and rising.
7:38 pm
At about 7:30 pm we were hit with a plume of type Sharp-Metallic and Chalky-Bitter-Pharma (Lithium?) with Inflammatory and Mercury additives. The Sharp-Metallic type is the dominant component. Intensity is now 8 and rising at a medium-fast rate.
10:25 pm
At about 8:30 pm we were hit with a plume of type Model Cement, Sharp-Metallic and Chalky-Bitter-Pharma (Lithium?) with Inflammatory and Mercury additives. Intensity rose quickly and and peaked at 8.5 and then dissipated in about 30 minutes.
At about 9:30 pm (are you seeing a pattern here) we were hit with a plume of type Model Cement and Chalky-Bitter-Pharma (Lithium?) with Inflammatory and Mercury additives. Intensity rose at a medium-fast fate and and peaked at 8.75 and then dissipated fairly quickly. The Chalky type was the dominant component.
It's reassuring to hear how many people smell and taste this. I have heard from hundreds over the years that can. I smell and taste it 24/7. Between the plumes - which are 1 to 2 hours apart - the air never clears. In the beginning, I could not smell anything between plumes. The air became completely clear, but after about 18 months of daily spraying, the air reached a point where I could smell the remnant of the previous plume as the next plume hit us. The air never cleared anymore. Now, the "ambient" intensity between plumes is 7.5 of 10, which is fairly strong; strong enough to keep us perpetually exhausted and in chronic pain.
11:35 pm
A few minutes ago we were hit with a plume of type Model Cement, Sharp-Metallic and Chalky-Bitter-Pharma (Lithium?) with Inflammatory and Mercury additives. Intensity is rising at a medium-fast rate and is already at intensity 8.5. The Inflammatory additive is the dominant component.
12:14 am (2/1)
The intensity of the previous plume is now 8.75.
12:24 am (2/1)
The intensity of the previous plume is now 9.25+.
The spray intensity has been unbelievable.
12:42 am (2/1)
The intensity of the previous plume is now 9.75.
This type of intensity is certainly going to kill people, especially those who are more sensitive. It's shocking that anyone cannot smell or taste this. I know many do.
January 30
Overnight
A slightly lighter night of spraying after a horrendous evening. Type was the typical Model Cement and Chalky-Bitter-Pharma with the Inflammatory and Mercury additives. The Inflammatory additive was the dominant component. Ambient intensity through the night ranged from 7.5- to 8.
11:20 am
We have been hit with the following plumes so far today:
At 8:23 am - Type: Model Cement and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. Peak intensity: 8.5+.
At about 9:30 am - Type: Chalky-Bitter-Pharma with Inflammatory and Mercury additives. Peak intensity: 8.75.
At about 10:45 am - Type: Model Cement and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. We are currently still under this plume. Intensity has risen to 9.75. What a way to start the day!
The attack against all life continues.
2:18 pm
At about 1 pm - Type: Model Cement and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. Intensity peaked at 9.25.
The largest crime against humanity in human history continues.
11:04 pm
We have been hit with the following plumes this afternoon and evening. The peak intensity for plumes ranged between 8.5 and 9.25. You will notice that the type profile was amazingly consistent for each plume.
At 6:11 pm - Type: Model Cement with Inflammatory and Mercury additives.The Model Cement type was dominant.
At 7:42 pm - Type: Model Cement with Inflammatory and Mercury additives.The Model Cement type was dominant.
At 8:13 pm - Type: Model Cement with Inflammatory and Mercury additives.The Model Cement type was dominant.
At 9:25 pm - Type: Model Cement with Inflammatory and Mercury additives.The Model Cement type was dominant.
At 10:50 pm - Type: Model Cement with Inflammatory and Mercury additives. The Inflammatory additive is dominant by far. Intensity is currently 9 and still rising.
12:31 am (1/31)
At about 12:25 am (1/31/) we were hit with a plume of type Model Cement and Sharp-Metallic with Inflammatory and Mercury additives. Intensity is rising quickly and is currently 9. The Inflammatory additive is dominant by far.
1:32 am (1/31)
The intensity of the previous plume peaked at 9.75 and is currently at 9.5 and declining slowly. This is likely a layered plume because without layering it would not have lasted this long. The Sharp-Metallic is so potent that it makes your teeth tingle, like chewing aluminum foil. This is a torturous nightmare. The Sharp-Metallic type and Inflammatory additive are both dominant.
January 29
Overnight
A slightly lighter night of spraying than usual. Type was the typical Model Cement and Chalky-Bitter-Pharma with the Inflammatory and Mercury additives. The Inflammatory additive was the dominant component. Ambient intensity through the night ranged from 7.5+ to 8-.
I was not awake enough to monitor plumes at the typical times of 3:30 and 5:30 am, but we did have one hit us at 7:46 am. Type was Model Cement and Chalky-Bitter-Pharma (Lithium?) with Morgellon's, Inflammatory, and Mercury additives.
The Morgellon's additive was less intense than it used to be months ago peaking at intensity 7.5 while the Inflammatory additive was dominant.
When the Morgellon's additive is at this lower intensity, the bug-biting sensation is less frequent but the individual bite-sensations themselves are nearly as intense. It's a very strange phenomenon but it's very real and always associated with the presence of this additive. Without this additive in the air, I have no bug-biting sensations at all. This bug-biting phenomenon has been associated with the Morgellon's disease/condition since the disease was first recognized and has driven some people crazy.
1:41 pm
Since about 9 am, intensity has slowly oscillated between 7.5 and 7.75+ with the typical mix of Model Cement and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. Current intensity is 7.75-.
The poisoning of all life continues.
3:38 pm
A little before 3 pm we were hit with a plume of type Model Cement and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. Intensity rose at a medium-slow rate and is now 8.75-. The Chalky type is the dominant component.
5:05 pm
At about 5:50 pm we were hit with a plume of type Model Cement and Chalky-Bitter-Pharma (Lithium?) with Biologics, Inflammatory and Mercury additives. Intensity rose at a medium rate and is now 8.5+. The Chalky type is the dominant component. The Biologics are a close second.
6:56 pm
At about 6:45 pm we were hit with a plume of type Barium and Chalky-Bitter-Pharma (Lithium?) with Inflammatory and Mercury additives. Intensity is rising at a medium rate and is now 8.75. The Barium type is the dominant component.
7:51 pm
At about 7:45 pm we were hit with a plume of type Sharp-Metallic and Chalky-Bitter-Pharma (Lithium?) with Inflammatory and Mercury additives. Intensity is rising at a fast rate and is already at 8.75. The Sharp-Metallic type is the dominant component.
9:25 pm
At about 9:05 pm we were hit with a plume of type Model Cement with Inflammatory and Mercury additives. Intensity is rising at a medium rate and is now 8. The Model Cement type is the dominant component.
10:21 pm
At about 9:55 pm intensity dropped to 7.25+. This was our nightly "break".
As I type this, a plume is beginning to hit us. The first component that has become detectable is the Biologic additive. Intensity will be back up to 7.5 shortly.
The chemical/biological attack on all life continues.
12:08 am (1/30)
At 11:55 pm we were hit with a plume of type Barium with Inflammatory and Mercury additives. Intensity is rising quickly and is already at 8.75-. The Barium type is the dominant component.
Are you seeing all the patterns here?
12:34 am (1/30)
The intensity of the previous plume peaked at 12:24 at intensity 9.75. Intensity is now falling and is currently 9.5.
This is not spraying. This is much more like fumigating. They are doing horrible things.
January 28
Overnight: A typical night of spraying. I believe we had 3 plumes around the typical times but I was not awake enough to nail down times for the first 2 plumes. Usually I am frequently awake and able to capture the times or at least to estimate their hit times (the times they reached ground level). Based on the info I have, I think we were hit at the usual nightly times: about 3:30 am, 5:30 am, and 7:30 am. I was awake shortly after the 7:30 am plume so that one I can verify the time of. The type of poison used was the typical: Model Cement and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. The Inflammatory additive was dominant in all plumes. Plume peak intensities were between 8.5 and 8.75 for all plumes.
12:57 pm
This morning we had another hit at roughly 9:30 pm which was the same type: Model Cement and Chalky-Bitter-Pharma with Inflammatory and Mercury additives.
At about 12:35 pm we were hit with yet another plume of type Model Cement, Copper, Chalky-Bitter-Pharma with Inflammatory and Mercury additives. Intensity rose quickly and peaked at 9.25 at 12:50 and is now declining.
Here is a link to a small photo gallery showing one of my first encounters with chemtrails in Jamestown, New York. This was an intense event that helped push me into researching this subject. I posted these some time later so the date on the post is later than the date the pictures were taken. The taste and smell of the chemtrails in Jamestown were intense. I had 3 employees and usually 2 of the 3 employees could taste them in the air as well as myself. Jamestown Photos
The attack on all life continues.
2:22 pm
At about 1:45 pm we were hit with a plume of type Model Cement, Copper, Chalky-Bitter-Pharma with Inflammatory and Mercury additives. Intensity rose at a medium-fast rate and peaked at 9.5+ at 2:15 pm. The taste this creates in the air (for us sensitive folks) is disgusting, bitter, metallic, and just nauseating.
I can hear the HAARP Hum just slightly, so it's at intensity 1 on a scale of 5. I thought I heard it yesterday, but with other ambient sound, I wasn't sure so I didn't log it. This is the longest stretch we have had without it for a long time. Have they reduced power so fewer people hear it? Whatever the reason, we used to hear it daily.
3:31 pm
At 3:25 pm we were hit with a plume of type Model Cement, Sharp-Metallic, Chalky-Bitter-Pharma with Inflammatory and Mercury additives. The previous plume had not completely cleared when this new plume hit. Intensity is now already at 8.75+ and rising at a medium-fast rate. The taste in the air is disgusting for us sensitive people.
They have been really mixing up the types lately all throughout the day. It has been unbelievable.
4:34 pm
This is the first time today that we've had "breathable" air today. Intensity has finally dropped to 7.75-, which is still bad-tasting and fatiguing, but at least it's breathable without being nauseating.
Why are they spraying us? This is one of the reasons: Globalism
4:43 pm
Well, that didn't last long. A few minutes ago we got hit with a plume of type Model Cement and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. Intensity is rising quickly and is already at 8.25.
8:17 pm
At about 6:50 pm we we were hit with a plume of type Model Cement and Chalky-Bitter-Pharma with Biologics, Inflammatory and Mercury additives. Intensity rose at a medium rate and peaked at 8.25+. The Biologics were mild but detectable. The Chalky type was the dominant component.
At about 7:50 pm intensity dropped to 7.5-.
At about 8:05 pm the intensity of the Biologic type began to rise slowly and is currently at 7.75-. The Sharp Metallic type is also becoming detectable. This is clearly a slow-rising plume, and as it rises, the components are becoming detectable. They don't all become detectable at the same time, but this is most apparent when intensity rises slowly. Just thought I'd include these details as there are so many details to chemtrails that you never hear about because those who smell and taste them rarely write details about them.
We have been hit with 2 plumes since the last log entry. Both plume were virtually identical. Here are the stats.
The plumes were of type Model Cement with TYPE I (one) Biologic, Inflammatory and Mercury additives. Intensity peaked at 8.75 for both plumes. The Biologic additive was the dominant component with both plumes.
The people of the future will truly wonder what was wrong with the people of this time. With all the evidence and historically-profound corruption we have, the majority of the populace still choose to be either uninvolved or willfully ignorant. Astonishing.
January 27
Overnight: If you read yesterday's log, you'll know that they sprayed heavily into the night which continued until after 2 am. From the time those late-night plumes dissipated until 5:30 am, intensity stayed around 7.5+ throughout. We had 3 nearly identical plumes hit us at roughly the following times: 5:30 am, 7:30 am, and 9:30 am. This is another clear patter that you will see if you have been following the logs. The type profile for all 3 of these plumes was Model Cement and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. The Inflammatory additive was dominant in all 3 plumes. The peak intensity for all 3 plumes was between 8.5 and 9 which is very intense. The mercury additive has been fairly strong for some time lately as I am very familiar with the symptoms of mercury exposure.
10:23 am
The intensity from the previous 9:30 am plume has not fully dissipated so air intensity is currently at 8.25+ with the Inflammatory additive still dominating.
11:49 am
At about 11:30 am we were hit with a plume of type Model Cement and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. Intensity is rising at a medium rate and is now 8.5+. The Chalky type is the dominant component.
1:45 pm
We are just now getting hit with a plume of type Model Cement, Copper, Chalky-Bitter-Pharma with Inflammatory and Mercury additives. Intensity is rising at a medium rate and is now 7.75+ The Chalky type is the dominant component.
2:57 pm
We are just now getting hit with a plume of type Sharp-Metallic and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. Intensity is rising at a medium-fast rate and is now 8.25. The Chalky type is the dominant component.
3:55 pm
We are just now getting hit with a plume of type Model Cement and Chalky-Bitter-Pharma (Lithium?) with Inflammatory and Mercury additives. Intensity is rising at a medium rate and is now 8+. The Chalky type is the dominant component.
5:55 pm
At about 5:30 pm we were hit with a plume of type Barium and Chalky-Bitter-Pharma (Lithium?) with Inflammatory and Mercury additives. Intensity is rising at a medium rate and is now 8.25. The Chalky type is the dominant component.
6:29 pm
The intensity of the previous plume is now 8.75.
7:50 pm
At about 7 pm we were hit with a plume of type Barium, Sharp-Metallic, and Chalky-Bitter-Pharma (Lithium?) with Inflammatory and Mercury additives. Intensity rose at a medium rate and peaked at intensity 9 at about 7:40 pm. This has been another nasty day of spraying with plumes often landing closer together than 2-hour intervals like they usually did for the first 15 years of spraying.
I know some areas began as early at 1995 and others as late at 2005 or later. But that 10-year period was the beginning of the intentional mass poisoning of the planet.
At about 9 pm intensity of the previous plume dropped to 7.25 and then 7 and remained there for just under an hour. This was our evening "break" that we usually have.
A few minutes ago we got hit with Biologics and the Chalky-Bitter-Pharma type. It's subtle but it's in the air and rising slowly.
This is why I believe that types are sprayed together. There are types that usually occur together year-after-year.
So, as I type this, intensity is 7.25+ and rising slowly. And another day passes by.
12:01 am (1/28)
Just a few minutes ago we were hit with a plume of type Barium with Inflammatory and Mercury additives. Intensity is rising at a medium rate and is now 8.75 and still rising. The Barium type is the dominant component.
Remember, barium (if this type contains barium) rapidly depletes your body of potassium and can induce heart attacks. In fact, barium is used in animal lab testing to artificially induce heart attacks because it's so efficient at doing so. There is no moral or lawful reason whatsoever that we should be getting spraying with anything.
See what we have found in the air, dust, and water: Lab Tests
12:36 am (1/28)
The intensity of the previous plume is now at 9+. What a time we live in.
January 26
Overnight: Intensity throughout the night was between 7.5- and 7.75- with the exception of a plume that hit us sometime around 2:30 am which peaked at intensity 8 briefly. Type profile was Model Cement and Chalky-Bitter-Pharma (Lithium?) with Inflammatory and Mercury additives with the Inflammatory additive being dominant in this plume and throughout the night.
10:36 am
At roughly 7 am we were hit with a very mild, slow-rising plume of type Model Cement and Chalky-Bitter-Pharma with Morgellon's, Inflammatory, and Mercury additives. The Inflammatory additive was the dominant component. The Morgellon's additive was mild but strong enough to induce mild symptoms.
It's now 10:38 am and intensity continues to rise slowly and is now at 8- with the following type profile: Model Cement and Chalky-Bitter-Pharma with Inflammatory and Mercury additives.
The HAARP Hum is still strangely absent - as it has been for several days now - or it's simply below my threshold of detection.
1:12 pm
At about 1pm we were hit with a plume of type Barium and Chalky-Bitter-Pharma with Biologics, Inflammatory and Mercury additives. Intensity is rising at a medium rate and is now 8+. The Barium type is the dominant component.
3:28 pm
At about 3:25 pm we were hit with a plume of type Model Cement, Sharp-Metallic, and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. Intensity is rising at a fast rate and is now 8.25. The Sharp-Metallic type is the dominant component.
3:39 pm
The intensity of the previous plume is already up to 8.75+ and still rising.
4:34 pm
The intensity of the previous plume peaked at 9.25 and has now declined to 9.
9:17 pm
After the previous plume decreased, the air continually wavered between intensity 7.5- and 8+. The dominant type in the air this entire time has been the Chalky-Bitter-Pharma type. This is the type that I suspect may contain lithium.
Lithium competes with Magnesium and Potassium potentially causing levels to fall, and over time, can induce heart fibs and even cardiac arrest and death. This is, very possibly, the reason that so many today are having magnesium metabolism issues. Based on all the testing that has been done, there are many other super-toxins in the plumes they are spraying, and the synergistic effect of this combination is clearly devastating to all life. We are seeing the decimation of this planet, but you won't see it if you are watching mainstream media.
At 8:47 pm we were hit with another plume of type Model Cement and Chalky-Bitter-Pharma with the Inflammatory and Mercury additives. Intensity rose quickly peaking at 8.75- but has now fallen to 8.5+. The Chalky type and the Inflammatory additive are both dominant.
It has been a long and exhausting day of spraying.
10:45 pm
The previous plume dissipated and fell all the way down to intensity 7 by about 9:45 pm. This has been a wonderful "break" from the intense poison that we have breathed all day.
As I type this, intensity just began increasing at a medium-fast rate and is now up to 7.5.
One day soon, the world will discover how many people have suffered through diseases or have died as a result of the long-term poisoning our taxes have paid for.
That didn't take long. Intensity is now up to 7.75 and rising.
What bizarre time we live in... Absolutely bizarre.
12:46 am (1/27)
At roughly 11:30 pm we were hit with a plume of type Model Cement, Sharp-Metallic and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. Intensity rose to the current high of 8.75-. The Sharp-Metallic type is the dominant component.
1:02 am (1/27)
The previous plume is now at intensity 9.5-. The Sharp-Metallic type becomes so piercing at this intensity that is makes my teeth tingle as if they are making contact with aluminum. Strange times we live in.
1:13 am (1/27)
The previous plume peaked at intensity 9.75- (nearly unbreathable) at about 1:08 am and is now declining.
1:40 am (1/27)
At about 1:20 am we were hit with another plume of type Model Cement, Sharp-Metallic and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. Intensity is already at 9 and is rising quickly. The Sharp-Metallic type is the dominant component.
Do you see how plumes are often about 2-hours apart? This is how it was from 2005 until the past year when they began to "randomize" the schedule a little.
January 25
Overnight: A fairly typical night based on recent history. Intensity throughout the night was between 7.5- and 7.75-. Type profile was Model Cement and Chalky-Bitter-Pharma (Lithium?) with Inflammatory and Mercury additives with the Chalky being dominant throughout the night.
11:42 am
At about 5:30 am we were hit with a plume of type Model Cement and Chalky-Bitter-Pharma with Morgellon's, Inflammatory, and Mercury additives. Intensity rose at a medium rate and peaked at a relatively-low (based on recent history) 7.75+. The Morgellon's additive was mild but strong enough to induce mild symptoms.
At 8:33 am we were hit with a plume of type Model Cement and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. Intensity rose at a medium-slow rate and peaked at 8.25-.
At about 10:30 am we were hit with a plume of type Model Cement and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. Intensity rose at a slow rate and is currently at 8.75- and still rising slowly.
Busy day. I went into Bangor for the afternoon and it was interesting in terms of spray intensity.
Was in Bangor roughly around 1 pm to 6 pm. Intensity was amazingly low compared to how it has been at home.
From about 1 pm to 4 pm intensity was 7.25 (very mild compared to recent history). The only type really detectable in the air was the Chalky-Bitter-Pharma during this time.
At 4 pm (still in Bangor) we were hit with a Biolotic plume that mixed with the Chalky type plume at intensity 7.5-. Both plumes remained quite steady in the air until I left. As I have said recently, they have become very good at maintaining steady intensity in the air over extended periods of time. Before the past year, this didn't happen.
As I got close to home, intensity rose slightly to 7.5+ with both types - Biologics and Chalky - in the air. This intensity remained steady from then until the past hour. At about 8:30 pm intensity of the Biologic type and the Inflammatory and Mercury additives rose a little to the current intensity of 8.
So, it's been an odd day. Perhaps at my house it was typical and in Bangor it was oddly steady, but I don't know because I wasn't there.
Nevertheless, the poison is still in the air and we still feel the health effects. The air should be clean and clear, but I suspect spraying will continue until a hugely-significant event occurs. This link explains why in detail. This is the world we live in.
January 24
Overnight: A fairly typical night (based on recent history) except that we didn't have the typical plumes at ~3 am, ~5 am, and ~7 am. Intensity throughout the night was between 7.5- and 7.75. Type profile was Model Cement and Chalky-Bitter-Pharma (Lithium?) with Inflammatory and Mercury additives with the Chalky being dominant throughout the night.
9:40 am
Just before 9 am we were hit with a slow-rising plume of type Model Cement and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. Intensity as I type this is 8.25-. The Chalky type (Lithium?) is the dominant type.
A great video to share: In Lies We Trust - A must-watch video for everyone.
11:42 am
The previous plume is now at intensity 8.25 so it peaked at 8.25- earlier.
At about 11:30 we were hit with a plume of type Model Cement and Chalky-Bitter-Pharma with TYPE II (flu-inducing) Biologics, Inflammatory and Mercury additives. Intensity as I type this is 8.25- and rising at a medium rate. The Biologic additive is the dominant component.
2:12 pm
The air intensity has continued from the previous plum even now. Intensity has been between 7.75+ and 8.5 throughout the afternoon. All types that were in the previous plume continue even now, including Biologics.
5:44 pm
The air intensity has continued between 7.75+ and 8.5 throughout the afternoon. All types that were in the previous plume (11:42 am) have continued but have only dissipated somewhat in the past hour.
A few minutes ago we were hit with a plume of type Copper with Inflammatory and Mercury additives. Intensity is rising pretty quickly and is now already at 8.5+ The Copper type is the dominant component.
10:04 pm
The previous plume continued in the air for some time. Finally, at about 9 pm we had our (almost) nightly break. Intensity dropped to 7.25+ and it was relaxing for a short while.
At about 9:40 pm we were hit with a plume of type Model Cement and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. Intensity rose quickly to intensity 9 in about 30 minutes which is where it is at right now. The Inflammatory additive is the dominant component.
If you have been following this log you may notice that we have not had the HAARP Hum here for some time. Not sure why, but it's an interesting change.
The poisoning of all life continues.
January 23
Overnight: Another milder-than-usual night, but that does not mean there isn't a substantial amount of poison in the air. Intensity through the night was 7.5- and was pretty steady based on the times I was awake. This is a horrible amount of poison in the air which I can plainly smell and taste and feel the effects of. Nevertheless, this is lower than usual based on recent history.
10:10 am
At about 6:45 am we were hit with a plume of type Model Cement and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. This plume peaked at 8.5-.
At about 7:50 am we were hit with a plume of type Model Cement and Chalky-Bitter-Pharma with Morgellon's, Inflammatory and Mercury additives. This plume peaked at 8.5+. The Morgellon's component was lower than the other components, and this has been common lately. The Inflammatory additive was dominant by far, and this has also been common lately. For years, the Inflammatory additive was most intense (by far) in the evening and night before midnight, but this is no longer the case. Now they are using the Inflammatory additive at intense levels in the morning, afternoon, and night. This is another huge change in recent history, second in significance only to the intense usage of the Chalky-Bitter-Pharma type, which is deadly to many.
At 9:50 am we were hit with another plume of the same type that hit slightly higher intensity levels. Type profile was Model Cement and Chalky-Bitter-Pharma with the Morgellon's, Inflammatory and Mercury additives. The Morgellon's additive was again low, but detectable and high enough to induce some symptoms. The Inflammatory additive was dominant above all other components. This plume peaked at intensity 8.75- pretty quickly after it hit us (within about 15 minutes) and it is now declining. The current overall air intensity of these poisons is 7.75+.
The chemical/biologics warefare against all life continues day-after-day, against all life. No one is exempt from the effects of these poisons. Some suffer much more than others for various reasons, but damage is done to everyone at some level, and when the damage reaches a certain threshold, it typically begins to manifest and increase quickly. For this reason, people look for a cause that "recently" occurred discounting that the cause is a long-term poisoning that finally reached a critical threshold wherein it finally presents symptoms.
Wake up world. You are only seeing the very beginning of this onslaught. The globalists have horrific and terrible things planned for your future if you allow them.
11:55 am
At about 11:45 we were hit with a plume of type Model Cement and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. Intensity is rising at a medium rate and is now 8.5-. The Inflammatory additive is the dominant component.
A little something I hope you will share: Climategate
2:47 pm
At about 2:30 pm we were hit with a slow-rising plume of type Model Cement and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. Intensity is now 8.5- and still rising at a slow rate.
7:47 pm
After the previous horrible plume cleared, air intensity remained between 7.75 and 8+ all afternoon. It was snowing and we have a lot of snow on the ground from heavy snowing all night.
Just a few minutes ago at about 7:40 pm we were hit with a plume of type Model Cement and Chalky-Bitter-Pharma with the Inflammatory and Mercury additives. If you are following this log you know which component was the strongest. It was the Inflammatory additive which is nearly always dominant at night, and in recent history, many other times as well. Intensity is rising at medium-fast rate and is now 8.5-.
9:38 pm
At about 9:20 (roughly) we were hit with a plume of type Model Cement and Chalky-Bitter-Pharma with the Inflammatory and Mercury additives. Again, the strongest component is the Inflammatory additive which is nearly always dominant at night. Intensity rose at medium-fast rate and is now 8.25.
January 22
Overnight: It was an unusually mild night (compared to recent history) with intensity very steady at 7.25+. Type profile was Model Cement and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. This was an unusual night because normally we are hit with 2 to 3 very strong plumes throughout the night.
3:47 pm
At 12 noon we were hit with a plume of type Model Cement and Chalky-Bitter-Pharma with the Inflammatory and Mercury additives. Intensity rose at a medium rate but I did not record the peak intensity.
At 2:05 pm we were hit with a plume of type Model Cement and Chalky-Bitter-Pharma with the Inflammatory and Mercury additives.
At 2:18 pm the intensity of the previous plume was at 9 (extremely intense).
At 2:26 pm the intensity of the previous plume was at 9.5 (nearly unbearable).
At 2:33 pm the intensity of the previous plume hit 10 which is defined at unbreathable (without a wet mask) for us sensitive people.
At 3:29 pm we were hit with a plume of type Model Cement and Chalky-Bitter-Pharma with the Inflammatory and Mercury additives. Intensity rose quickly and was already at 8.75 at 3:29 pm.
3:51 pm
The intensity of the previous plume is now at 9.25.
4:22 pm
The intensity of the previous plume climbed to 9.5 for some time. Then at 4:20 pm, intensity quickly dropped to the current level of 8.25 and is still dropping. So this plume has now fully passed over us and we are experiencing the trailing edge of it. This is shaping up to be another horrible day of poisoning.
5:22 pm
At about 5:10 pm we were hit with a plume of type Model Cement and Chalky-Bitter-Pharma with the Inflammatory and Mercury additives. Intensity is rising at a medium-fast rate and is now at 8.25+. The Chalky type is the dominant component.
6:08 pm
The intensity of the previous plume is now 9.5+. The Chalky type (Lithium?) is the dominant component.
7:14 pm
At about 7 pm we were hit with a plume of type Model Cement and Chalky-Bitter-Pharma with the Inflammatory and Mercury additives. Intensity is rising at a medium-fast rate and is now back up to 8.75-. The Chalky and Inflammatory types were the dominant components.
9:30 pm
At about 8:50 pm we were hit with a plume of type Model Cement and Chalky-Bitter-Pharma with the Inflammatory and Mercury additives. Intensity rose quickly and peaked at 9.25+ at about 9:10 pm. Intensity also fell quickly and is now back to 8+. The Chalky and Inflammatory types were both dominant components.
10:29 pm
Since about 10 :10 intensity has fallen to 7.25, so this is our nightly break. I don't know how long it will last. We have a big storm coming in right now that will drop several inches of snow, and usually the spray very hard during storms. It's been a bad day.
January 21
Overnight: Spray intensity was heavy throughout much of the night. The air was very toxic well past midnight as you can see from yesterday's post. The middle part of the night was the mildest, which has become very common these days. From about 2 am to 3 am is mildest. Sometimes this stretch extends to 5 pm. But usually just before 3 pm or just before 5 pm they hit us hard.
The combination they hit us with last night is the same combination they usually use in the early mornings these days. This combination is Model Cement and Chalky-Bitter-Pharma with Inflammatory and Mercury additives, with the Inflammatory type being the dominant component. The Chalky type (Lithium?) is usually pretty strong as well.
So this morning we were hit just before 3 am, just before 5 am, and again just before 7 am and then again just before 9 am. The type utilized in all 4 hits was the same type and the Inflammatory additive was far dominant in all 4 hits, as usual during the night and morning. Peak intensity of the plumes ranged from 8.25 to 9.5+ with each successive plume being stronger than the previous one. The 9 am plume was, therefore, the strongest peaking at 9.5+. So, overall, a horrible night of spraying.
11:37 am
Intensity of the air has continued to be between 8.75 and 9.5+ since the 9 am plume hit us. They hit us again just before 11 am with a plume that blended with the 9 am plume in order to maintain the intensity - and it is intense. As I type this, intensity is at 9 so the declination rate is very slow. So either it's not windy outside, or they are layering with frequent releases to maintain these high toxicity levels.
The type profile in the air is that same as it has been all night: Model Cement and Chalky-Bitter-Pharma with Inflammatory and Mercury additives with the Inflammatory additive being the dominant component, by far.
This is the single best form of protection that I have found against this poison. It normally blocks 40% to 90% of the particulates in the air depending on the type. Some types are blocked very well. Other types are not blocked nearly as well, but still help considerably. All these statistics are on the CT data page.
At 12:50 pm we were hit with a plume of type Model Cement, Copper, and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. This plume rose quickly and peaked at intensity 9 and is now at 8.75 and falling. The Copper and Chalky types are the dominant components.
1:45 pm
About 5 minutes ago we were hit with a plume of type Model Cement, Copper, and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. This plume is rising very quickly and is now at intensity 9+. The Copper and Chalky types are again the dominant components.
You'll notice that most of the time plume have historically been 2 hours apart, but recently they begin hitting us much more frequently. Intervals are now often 1 hour and 1.5 hours. This current plume is an example of the first hit today that is not on a 2 hour interval.
3:08 pm
At about 2:50 pm we were hit with a plume of type Model Cement and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. Intensity is rising slowly and is now 8.25-. The insane attack on all life continues.
4:34 pm
From about 3:30 pm to 4:30 pm air intensity dropped back to ambient levels of 7.5-.
A few minutes ago we were hit with a plume of type Model Cement, Copper, and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. This plume is rising at a medium-fast rate and is now at intensity 8+. The Chalky type is again the dominant component.
5:50 pm
At about 5:40 pm we were hit with a plume of type Model Cement, Copper, and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. This plume is rising at a medium rate and is now at intensity 8.25+. The Chalky type is again the dominant component.
7 pm
The intensity of the previous plume is now 8.5-.
7:26 pm
The intensity of the previous plume is now 9.
9:02 pm
A few minutes ago we were hit with a plume of type Model Cement, Copper, and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. This plume is rising at a medium-fast rate and is now at intensity 8+. The Chalky type is the dominant component.
This attack on all life is monstrous and savage, but the fact that the population is unwilling to work to stop it, much less acknowledge it, is the very same immorality that allows horrible things to happen in the first place. In short, we are collectively getting what we deserve. I know many of us are trying, but so many still don't care. Very sad.
9:22 pm
The intensity of the previous plume is now at 8.75+.
10:26 pm
The intensity of the previous plume is now at 8.25-.
11:18 pm
At about 10:40 pm we were hit with a plume of type Model Cement and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. This plume rose at a medium rate and peaked at intensity 9+ at about 11:10 pm. It is now declining. The Chalky type (Lithium?) is the dominant component.
January 20
Overnight: Spray intensity was a little lighter than normal, but don't forget, it's still poison. It's still harmful in so many ways. Intensity ranged from 7.5 to 8 throughout the night. Based on the times I was awake, there were no discrete plumes, only toxic ambient air from chemtrail fallout. The type in the air throughout the night was the Chalky-Bitter-Pharma type (Lithium?) with Inflammatory and Mercury additives.
9:37 am
Air intensity continues now at about 8+ with the Model Cement and the toxic Chalky-Bitter-Pharma type (Lithium?) and the Inflammatory and Mercury additives.
At roughly 10:30 am I began detecting Biologics in the air. Intensity of this component is now 7.75 and rising slowly.
3:47 pm
There have been no discrete plumes since the previous log entry, but air intensity has waivered up and down with various components.
Earlier the Chalky-Bitter-Pharma type dominated the air.
Then the Model Cement type slowly infiltrated the air.
Then the Mercury additive rose in intensity and dominated the air for the past hour or so.
Now we are being hit with a plume of type Chalky-Bitter-Pharma with Inflammatory and Mercury additives. Intensity is now 8.25 and rising at a medium rate.
This epic crime against humanity continues on our watch.
4:58 pm
The previous plume is still in the air at intensity 8.75-. They have become very skilled at maintaining the intensity of the air with little variation. This may be accomplished by layering; spraying at a higher frequency and lower intensity. This would have the effect of keeping toxic levels at a more steady intensity. It seems they are focusing on keeping the Chalky type in the air 24/7.
As you may know if you are keeping up with this log, the Chalky-Bitter-Pharma type is the newest type and the most symptom-inducing type. This type has all the artifacts of containing lithium. Some rain/condensation testing has been done and has show astronomical amounts of lithium. Some in the U.S. are currently working on repeating these tests to help wake up the sleep masses to the fact they are not only being poisoned, they are also being drugged.
Every new type they have ever introduced has always-always been worse symptomatically than all previous types. In short, every new type has been worse than every previous type.
6:26 pm
At about 6:10 pm we were hit with a plume of type Model Cement and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. Intensity rose quickly to 8.75 just briefly. Intensity then began to fall quickly as well. This was clearly a partial hit. This is where the plume hits us from above as it's traveling horizontally, so it was mostly past us when it hit us. This is why it had such a short duration. Intensity has not yet returned to "normal" ambient levels of 7.5 yet, but it's now at 8. The Chalky type is the dominant component, by far.
Are you noticing that the Chalky type is their new favorite, as least for my area. I cannot speak for other areas as there is some variable in patterns in different areas. Even the area immediately around my house is almost always more intense than the surrounding areas, even Bangor, which is far more densely populated than this small, rural town.
The globalists attack on us all continues.
If you don't know the playbook of the globalists, I highly recommend you watch the videos on this page:
About 10 minutes ago we were hit with a plume of type Chalky-Bitter-Pharma (their new favorite) with Inflammatory and Mercury additives. Intensity is rising at a medium rate and is now at 8.
8:56 pm
The previous plume rose a little more and then dissipated quickly. The air fell down to intensity 7.25+ for about 20 minutes, which felt great, but that has now ended.
About 5 minutes ago we were hit with a plume of type Chalky-Bitter-Pharma with Inflammatory and Mercury additives. Intensity is rising at a medium-fast rate and is now at 8.25.
10:17 pm
Like the previous plume, the previous plume rose a little more and then dissipated, but a little less quickly. The air fell down to intensity 7.5-.
At about 10:10 pm we were hit with a plume of a different type than the rest of the day. This type is Blunt Metallic and Model Cement with Inflammatory and Mercury additives. Intensity is rising quickly and is already at 8.5+. By the time I've done typing this it will be up to 8.75.
10:43 pm
The previous plume (10:17 pm) peaked at 9.5- about 5 minutes ago. It's just beginning to subside now.
10:49 pm
They are really hitting us hard tonight. We are just now getting hit with a plume of type Model Cement and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. The intensity of the previous plume has not subsided much, but this plume is increasing quickly.
They know their time is short and they don't have much time to accomplish their goals. They are moving as quickly as they can get away with.
12:06 am (1/21)
The intensity of the air has not subsided to ambient levels, not even close. As I type this, the intensity of the air is 8.5 and has been steady as this level since the previous plume hit. All the same components are present as well: Model Cement and Chalky-Bitter-Pharma with Inflammatory and Mercury additives.
You'd think they were trying to kill us or something. See The Plan
January 19
Overnight: This is a very common pattern, and it happened again last night. We were hit with 2 strong plume containing the Inflammatory and Mercury additives. Hit times were just before 5 am and just before 7 am. Intensity of the 5 am plume peaked at about 8.5. Intensity of the 9 am plume peaked at 9.25 intensity. The sleep you have the few hours before waking are very important as this is when most of your REM sleep occurs. Interfering with the sleep leads to many conditions and diseases over time.
Childhood asthma is now the #1 new childhood disease while smoking is at an all-time low. I have seem asthmatic children have events DURING PLUMES, so the timing is no surprise to me whatsoever. Mercury vapor causes asthma. This is known and chemtrails contain mercury.
10:22 am
At about 9 am we were hit with a plume of type Model Cement and Chalky-Bitter-Pharma (lithium?) with inflammatory and mercury additives. The intensity of this plume is rising slowly and is now 8.5+, which is very strong. The taste in the air is horrible.
11:12 am
At about 11 am, the previous plume peaked at intensity 9. The Chalky-Bitter-Pharma type is the dominant component. It's horrible to breath and it's so strong here.
1:07 pm
At 12:02 pm we were hit with a plume of type Model Cement and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. Intensity rose slowly and peaked at intensity 8.75+ at about 12:50 pm. Intensity is now 8.5 and dropping slowly. The Chalky type is the dominant component, by far.
1:07 pm
At 12:02 pm we were hit with a plume of type Model Cement and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. Intensity rose slowly and peaked at intensity 8.75+ at about 12:50 pm. Intensity is now 8.5 and dropping slowly. The Chalky type is the dominant component, by far.
4:07 pm
At about 3 pm we were hit with a plume of type Model Cement and Chalky-Bitter-Pharma with Biologics, Inflammatory and Mercury additives. Intensity rose at medium-slow rate and peaked at intensity 8.5+ at about 3:55 pm. Intensity is now 8 and dropping slowly. The Biologic type is the dominant component.
11:02 pm
Well, it's been an eventful day. They have kept the air between intensity 7.75 and 8.5 all day with the Chalky-Bitter-Pharma type. There have been no breaks until between about 9 pm and 10:45 pm.
At about 6:50 pm the intensity of Biologics began increasing and stayed at between 7.75 and 8.5, although we had biologics in the air for hours after the 4 pm plume hit us.
At about 10:45 pm we were hit with a plume of type Chalky-Bitter-Pharma with Biologics, and Inflammatory and Mercury additives. The intensity of this plume is now at 8.5+ and rising at a medium-slow rate.
This has been another horrible day of spraying. It feels like they are not letting up on the Chalky type, which has a symptom set nearly identical to lithium. It is very dangerous at these levels and can lead to heart attacks and many other symptoms.
God help us.
12:17 am (1/20)
The intensity of the previous toxic plume is now 8.7- and still rising slowly.
January 18
Overnight: We were hit with several strong plumes throughout the night which peaked between intensity 8.5 and 9. In short, a heavy night of poisoning. Yes folks, this is poisoning. I did not record the exact times of the plumes but they were some time between 5 am and 7 am. Type was the Model Cement and Chalky-Bitter-Pharma (lithium?) type with Inflammatory and Mercury additives.
10:07 am
At about 8:30 am we were hit with a very strong plume containing 2 types that we have not had here for a long time; the Blunt-Metallic type and the Phosgene type. This plume peaked over intensity 10 and is now slowly declining. It is now at intensity 9.75+. It is dissipating very slowly, perhaps because they are layering to keep the intensity up for a longer period of time. In this plume I could smell the Phosgene type, which also has not been used here in quite some type. Along with these 2 horrific plume were the usual additives: the Inflammatory and Mercury additives.
Skies have been gray for days with this horrible ice storm that we have had for days as well. The ice storm let up yesterday, but the gray skies continue.
11:31 am
The previous plume never fully dissipated. Intensity still remains at 8.75-. The historic crimes against humanity continue.
1:07 pm
We are now being hit with another plume of type Blunt Metallic with Inflammatory and Mercury additives. Intensity is rising at a medium rate and is now 8.25-. The attack continues.
3:53 pm
A few minutes ago we were hit with a plume of type Model Cement with Inflammatory and Mercury additives. Intensity is rising quickly and is now 8.5. The attack continues.
5:43 pm
A few minutes ago we were hit with a plume of type Model Cement, Blunt Metallic, and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. Intensity is rising at a medium-fast rate and is now 8. They have been using a few older chemtrail types more often in recent history.
5:59 pm
The intensity of the previous plume is now 9 (extreme).
8:25 pm
At 7:02 pm we were hit with a plume of type Blunt Metallic and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. Intensity has risen at a slow rate and peaked at intensity 8.75 at about 7:50 pm. Intensity has been slowly decreasing and is now 8.25+.
This has been a horrible day of spraying.
9:05 pm
At 9:02 pm we were hit with a plume of type Blunt Metallic and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. Intensity is rising at a fast rate and is already at 8.5-.
The attack against all life continues. One day people of the future will look back and ask what on Earth was wrong with people of today who pretend this isn't happening. These events are obvious, historic, epic (not in a good way), and wicked beyond anything in history.
10:18 pm
At about 10:10 pm we were hit with a plume of type Model Cement, Blunt Metallic and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. Intensity is rising at a medium-fast rate and is already at 8.75-.
So this hit is just 1 hour after the previous one. So they are hitting us at 2-hour, 1-hour, and 1 1/2-hour increments. We used to get hit on 2-hour increments. In the past months they have been hitting us more and more frequently.
10:26 pm
The intensity of the previous plume is now 9.5+.
12:26 am (1/19)
At about 12:15 am we were hit with a plume of type Model Cement, Blunt Metallic and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. Intensity is rising at a medium rate and is now at 8.25-.
January 17
Overnight: A typical night of spraying. Intensity throughout the night was between intensity 7.5 and 8 with several plume hitting us peaking between 8.5 and 9. The type profile was Model Cement and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. I did not record the times we were hit during the night, but we were hit with at least 2 plumes peaking in intensity at levels mentioned above.
1:22 pm
We were hit this morning with another plume somewhere around 8:30 am (roughly) that peaked at intensity 8.5. Type was the Model Cement and Chalky-Bitter-Pharma with Inflammatory and Mercury additives.
We are now being hit with another plume of type Model Cement and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. Intensity is rising at a medium-fast rate and is now already intensity 8-.
2:11 pm
The previous plume peaked at intensity 9.75 at 1:55 pm. Intensity has now fallen to 8.5+.
3:47 pm
At about 3:20 pm we were hit with a plume of type Model Cement and Sharp Metallic with Inflammatory and Mercury additives. Intensity is rising at a medium-slow rate and is now 8.25- and still rising. It's interesting how they have begun using the Sharp Metallic type more often in the past several weeks.
They way they mix the poisons that fall on us lends to the idea that mixtures are created onboard. Several metals/chemicals are dispersed as groups, not as single components. This is clearly by design. They knew from the beginning that mixing components was necessary to complicate and randomize the symptoms induced so as to avoid pattern-watchers from identifying symptomatic patterns among the population. Randomness disperses the notion of pattern which disperses the notion of intent. This is one of the many ways they keep the population guessing.
4:52 pm
At about 4:40 pm we were hit with a plume of type Model Cement and Chalky-Bitter-Pharma (lithium?) with Inflammatory and Mercury additives. Intensity is rising at a medium rate and is now 8.5.
6:29 pm
At about 6:25 pm we were hit with a plume of type Model Cement and Chalky-Bitter-Pharma (lithium?) with Inflammatory and Mercury additives. Intensity is rising at a medium rate and is now 8.25. The Chalky type is the dominant component.
6:36 pm
The intensity of the previous plume is now 8.75 and still rising.
7:53 pm
From a little after 7 pm until about 7:30 pm intensity had dropped rapidly down to 7.25 which felt fantastic for a short time. Inflammatory dropped, pain left, and stress turned to relaxation.
Unfortunately, it was short-lived. At about 7:30 pm we were hit with a plume of type Model Cement and Chalky-Bitter-Pharma (lithium?) with Inflammatory and Mercury additives. Intensity rose rapidly to 9.75 and is now at 9 and declining.. The Chalky type is the dominant component.
11:20 pm
From about 9 pm until just now we have had our (almost-nightly) break. Intensity dropped to 7.25-, but now the break is over.
About 5 minutes ago we were hit with a plume of type Model Cement and Chalky-Bitter-Pharma (lithium?) with Inflammatory and Mercury additives. Intensity is rising at a medium-fast rate and is already at 8.5-. Some don't feel it or taste it. Others suffer horribly. Don't discount the real pain and suffering that some are experiencing if you happen to be among those that don't suffer. It is horrible. It is a real nightmare.
11:29 pm
The intensity of the previous plume is now 8.75.
The largest, most destructive attack against all life continues, day-after-day, on our watch.
11:39 pm
The intensity of the previous plume is now 9.5-.
January 16
Overnight: A typical night of spraying. Intensity throughout the night was between 7.5 and 8.25. The type profile was Model Cement, Barium, and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. We were hit by a plume at roughly 7:20 am. I was not awake for it, but I estimate the time by comparing the rise/fall time with the current intensity. Type was the same as was used throughout the nigh.
11:26 am
At about 11 am we were hit with a plume of type Model Cement and Chalky-Bitter-Pharma with the Inflammatory and Mercury additives. This plume is rising at a slow rate and has now reached intensity 8 and still rising.
1:47 pm
At about 1:30 pm we were hit with a plume of type Model Cement and Chalky-Bitter-Pharma with the Inflammatory and Mercury additives. This plume is rising at a slow rate and is now 7.75.
3:17 pm
At about 3 pm we were hit with a plume of type Model Cement, Chalky-Bitter-Pharma with Biologics, Inflammatory and Mercury additives. This plume is rising very slowly and probably traveled some distance before it arrived here. Intensity is 7.75+. It has been sleeting outside for the past 24 hours.
5:11 pm
At about 5:05 pm we were hit with a plume of type Barium with Inflammatory and Mercury additives. Intensity is already 8.25 and is rising quickly.
5:21 pm
The intensity of the previous plume is already at 8.75+. The Barium type is the dominant component.
7:54 pm
At 7:36 pm we were hit with a plume of type Model Cement with Inflammatory and Mercury additives. Intensity is 8.5 and is rising at a medium rate. The Inflammatory additive is the dominant component.
11:40 pm
From about 9 pm until 11:40 pm we had our (almost) nightly break. Intensity dropped to 7.25+ during this time.
At 11:35 pm we were hit with a plume of type Model Cement with Inflammatory and Mercury additives. Intensity is 8.25 and is rising quickly. The Inflammatory additive is the dominant component.
Just in the time it took me to type this, intensity has risen to 8.75-. This plume was clearly a direct hit. It's horrible.
11:47 pm
The intensity of the previous plume has already risen to intensity 9.25-. This is intense. One day the world will know what has been done to them... intentionally.
12:01 am (1/17)
The intensity of the previous plume is now up to 9.75-. No words.
1:32 am (1/17)
A few minutes ago we were hit with a plume of type Model Cement and Sharp Metallic with Inflammatory and Mercury additives. Intensity is 8.25 and is rising quickly. The Inflammatory additive is the dominant component. The attack against all life continues.
1:38 am (1/17)
The intensity of the previous plume is already at 9 and still rising.
1:59 am (1/17)
The intensity of the previous plume is now at 10 (of 10). The HAARP Hum has become audible at intensity 3 of 5.
January 15
Overnight: A slightly lighter-than-usual night of spraying. Intensity throughout the night was between 7.5- and 7.5+. The type profile that we were breathing all night was Model Cement and Chalky-Bitter-Pharma with Inflammatory and Mercury additives.
7:25 pm
I have kept notes throughout the day but have not been able to log until now.
At about 7:45 am we were hit with a plume of type Model Cement with Inflammatory and Mercury additives. Intensity peaked at 8.25+
At about 10:45 am we were hit with a plume of type Model Cement with Inflammatory and Mercury additives. Intensity peaked at 8.5+
At 1:01 pm we were hit with a plume of type Model Cement with TYPE III Biologics, Inflammatory and Mercury additives. Intensity peaked at 8.57+
We are being hit with a sleet storm with some medium winds.
At 3:04 pm we were hit with a plume of type Model Cement and Barium with TYPE III Biologics, Inflammatory and Mercury additives. Intensity peaked at 8.5-. The HAARP Hum became audible at intensity 4 of 5.
At 5:36 pm we were hit with a plume of type Model Cement and Barium with TYPE III Biologics, Inflammatory and Mercury additives. Intensity peaked at 8.75+.
At about 7:10 pm we were hit with a plume of type Model Cement and Barium with Inflammatory and Mercury additives. Intensity is now 8.75 and still rising.
8:18 pm
At about 8:10 pm we were hit with a plume of type Model Cement and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. Intensity is now 8.5 and rising. The Inflammatory additive is the dominant component.
12:18 am (1/16)
At 10:45 pm we were hit with a plume of type Model Cement and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. Intensity rose at a medium rate and peaked at 8.25+. The Inflammatory additive is the dominant component as it usually is in the evening.
About 5 minutes ago we were hit with another plume of type Model Cement and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. Intensity is now 8.5+ and rising at a medium-fast rate. The Inflammatory additive is the dominant component.
1:16 am (1/16)
At about 1 am we were hit with another plume of type Model Cement and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. Intensity is now 8.75- and rising at a medium rate. The Inflammatory additive is, once again, the dominant component.
2:24 am (1/16)
At about 2:20 am we were hit with a plume of type Barium and Sharp Metallic with Inflammatory and Mercury additives. Intensity is now 8.75 and rising very quickly. This plume is clearly a direct hit. The Sharp Metallic type is the dominant component. This is a great example of how often they switch-up the types they spray. I will add more information about why I believe they do this in a future post.
January 14
Overnight: A lighter-than-usual night of spraying. Intensity throughout the night was between 7.25+ and 7.5-. The type profile that we were breathing all night was Model Cement and Chalky-Bitter-Pharma with Inflammatory and Mercury additives.
1:11 am
At roughly 9 am this morning we were hit with a very subtle plume containing the same components that we had overnight (see "overnight" section above) but also contained the Morgellon's additive at a lower intensity of 7.5-. The Morgellon's additive has been present at a very low level several days over the past few weeks but I have forgotten to log it because it has been so subtle. Nevertheless, it has been present.
At about 12 n we were hit with a slow-rising plume of type Model Cement and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. Intensity rose slowly peaking at about 12:50 pm at intensity 8-.
At about 1 pm we were hit with a plume of type Model Cement and Chalky-Bitter-Pharma with Morgellon's, Biologic, Inflammatory and Mercury additives (yes, all of them). Intensity is now at 8- and rising at a medium rate. Remember, the Morgellon's additive is used for roughly a week and then we get a 3 to 6 week break from it.
So, the attack on all life continues on our watch.
2:30 pm
The previous plume peaked at intensity 8.25+ at about 2 pm and has now fallen to intensity 7.75-.
4:03 pm
A few minutes ago we were hit with a plume of type Model Cement and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. Intensity is now at 7.75+ and rising at a medium rate. The Chalky type is the dominant component.
7:03 pm
A few minutes ago we were hit with a plume of type Barium and Chalky-Bitter-Pharma with TYPE III Biologics, Inflammatory and Mercury additives. Intensity is now at 8+ and rising at a medium-fast rate. The Barium is the dominant component.
8:14 pm
The previous plume peaked at intensity 8.75. The Biologic additive was the dominant component. The Barium type was second most intense.
8:53 pm
At about 8:30 pm we were hit with a plume of type Barium and Chalky-Bitter-Pharma with TYPE III Biologics, Inflammatory and Mercury additives. Intensity is now at 875- and rising at a medium-fast rate. The Biologic additive is the dominant component.
Since the past 2 plumes are of type Barium, I just checked weather and, sure enough, we have a front hitting us tonight dropping snow and sleet over the next couple days. Why is this significant? Because the Barium type is almost always sprayed before incoming precipitation.
January 13
Overnight: A heavy night of spraying. Intensity ranged from 7.5 to 8.5 throughout the night. The type was Model Cement and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. The Inflammatory additive was dominant throughout the night.
9:49 am - The air all morning has been the same type: Model Cement and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. The Inflammatory additive has been consistently dominant. This is one of the new recent patterns; they are using the Inflammatory additive much more often now, not just in the evenings. Intensity as I type this is 8.5-
The attack on all life continues.
6:59 pm - It has been a cold, rainy day all day today. Intensity of chemtrail fallout in the air has oscillated between 7.5 and 8 throughout the day. Discrete plumes were undiscernible likely from high-altitude releases whos edges were well diffused by the time they reached ground level. Type throughout the day has been a mix of Model Cement, Barium, and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. The Inflammatory additive has been dominant all day.
At about 6:50 pm we were hit with plume of type Model Cement and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. Intensity Is now 8.25- and rising at a medium-fast rate. The Model Cement type is the dominant component.
9:31 pm - At about 9:20 pm we were hit with a plume of type Model Cement with Inflammatory and Mercury additives. This plume came on quickly and is rising very fast. Intensity is already at 9- and still rising. This was clearly a direct hit. The edges of plume were very well defined so they didn't travel laterally - along the ground - to get here. Both the Model Cement and Inflammatory components dominate this plume.
The historic crimes against humanity continue every single day.
10:21 pm - The intensity of the previous plume peaked at 9.25 and has now fallen to 8.75+ and is declining very slowly. The Inflammatory additive is the dominant component.
12:01 am (1/14) - At about 11:45 pm we were hit with another plume. This one contains Biologics. Type is Model Cement and Sharp Metallic with TYPE III Biologics, Inflammatory, and Mercury additives. Intensity is rising at a medium-slow rate and is now at intensity 8.5+.
12:52 am (1/14) - The previous plume is still in the air at intensity 8-. The Biologic additive turned out to be the dominant component. It's a very strong biologic and I can also feel it trying work down my immune system. What a world we live in. All those who are not listening will soon wish to God that they had listened. It's very sad that people think they can ignore the warnings and things will get better when you have people in control who are committing historic crimes against humanity.
The HAARP Hum is also audible right now at intensity 3 of 5. It was also audible one of the past couple nights but I forgot to log it.
What a time we live in.
2:04 am (1/14) - We are just now getting hit with another plume. This one contains Biologics as well. Type is Model Cement and Sharp Metallic with TYPE III Biologics, Inflammatory, and Mercury additives. Intensity is rising at a medium-slow rate and is now at intensity 7.75.
January 12
Overnight: Intensity throughout the night remained between 7.5- and 7.5+. Type was the typical Model Cement with Inflammatory and Mercury additives. Just before 5 am we were hit with a plume of type Model Cement and Chalky-Bitter-Pharma with Inflammatory and Mercury additives which peaked at intensity 8.5.
10:34 am - Just before 9 am we were hit with a plume of type Model Cement and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. Intensity peaked at 8.25+.
The previous plume has mostly dissipated. Air intensity is currently at 7.75- with all the same components of the previous plume.
The poisoning of the world continues, day after day.
12:39 pm - At 11:20 am we were hit with a plume of type Model Cement and Chalky-Bitter-Pharma (lithium?) with Inflammatory and Mercury additives. This plume peaked at intensity 8.25 at about 12 noon. Intensity has now dropped to 8+ (not much) since then.
3:29 pm - At about 2:20 pm, air intensity finally fell back to the "normal" ambient intensity of 7.5. That is the most common level that we experience between plumes in recent years. This used to be lower, but has increased slowly through the years.
At about 3:25 pm we were hit with a plume of type Model Cement and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. Intensity is rising at a medium rate and is now 8. The Chalky type is the dominant component.
5:22 pm - We are now getting hit with a plume of type Model Cement and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. Intensity is rising at a medium rate and is now 7.75+. The Chalky type is the dominant component.
6:25 pm - A few minutes ago we were hit with a plume of type Model Cement and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. Intensity is rising quickly and is now 8.5. The Model Cement type is the dominant component.
7:58 pm - A few minutes ago we were hit with a plume of type Model Cement and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. Intensity is rising quickly and is now 8.25. The Chalky type is the dominant component.
10:45 pm - About 10 minutes ago we were hit with a plume of type Model Cement and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. Intensity is rising quickly and is now 8.25. The Inflammatory type is the dominant component.
The attack on all life continues.
11:03 pm - The intensity of the previous plume is now 9+ and still rising.
11:12 pm - The intensity of the previous plume is now 9.25+. The Inflammatory additive is still dominant, by far.
11:23 pm - The intensity of the previous plume is now 9.75. The Inflammatory additive is still dominant.
12:14 am (1/13) - The intensity of the previous plume is now 8.25. The Inflammatory additive is still dominant.
1:06 am (1/13) - About 5 minutes ago we were hit with a plume of type Model Cement and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. Intensity is rising at a medium-fast rate and is now 8+. The Chalky type is the dominant component.
January 11
Overnight: We had 2 notable plumes during the night. They hit us at about 5:45 am and 7:40 am. Both had the same type profile: Model Cement with Inflammatory and Mercury additives. In both cases, the Inflammatory additive was far, far dominant above the others. If you have been reading this log for any time, you see another recent repeating pattern; they are making the Inflammatory additive dominant much more often than they used to. The intensity of the 5:45 am plume peaked at intensity 9.75- at about 6:20 am. The 7:40 am plume peaked at intensity 8.5+ at about 8:20 am.
1:23 pm - At about 11 am and then at 1:10 pm we were hit with plumes of type Model Cement and Chalky-Bitter-Pharma (lithium?) with Inflammatory and Mercury additives. The intensity of the 1:10 pm plume is now at 8.75- and still rising. The Inflammatory additive is the dominant component.
3:11 pm - Just wanted to give an update on this... another horrific day of spraying. The air intensity from the previous plume peaked at 8.75+ and then dissipated back down to 8.5 and has remained at that level ever since.
Before writing this paragraph, I went to the window to see what the sky looked like and immediately saw 2 very-short, non-persistent plumes being released. One is flying east and the other west and they were both visible out the same window. I only checked 2 windows. This gives you and idea of just how frequently they are in the sky. Virtually every single time I go outside I hear jets in the air. It's almost continuous.
Nearly all plumes are non-persistent. Why? Because they are lying to the public claiming the trails are "harmless jet contrails" which they are not. I smell the fallout and have since they day I first encountered them. Please see this article for details:
4:11 pm - I am now detecting Biologics in the air. Intensity is rising slowly and is now at 7.25, which is still lower than the other components in the air from the previous plume. I can also taste the Barium type increasing slowly as well.
6 pm - The Biologics have continued to creep up in intensity very slowly. They are now at intensity 7.75. This is a TYPE II Biologic. The Chalky-Bitter-Pharma type is also in the air at intensity 7.75-.
7:12 pm - We are now being hit with a plume of type Model Cement with Inflammatory and Mercury additives. Intensity is rising at a medium rate and is now 7.75+.
10:16 pm - We are now being hit with a plume of type Model Cement with Inflammatory and Mercury additives. Intensity is rising at a medium rate and is now 7.75+. The Inflammatory additive is the dominant component.
10:40 pm - The intensity of the previous plume is now up to 8.5+.
11:07 pm - The previous plume began dissipating at a medium-fast rate and has now mostly dissipated, but we are now being hit with a plume of type Model Cement and Barium with Biologic (TYPE II), Inflammatory, and Mercury additives. Intensity is rising at a medium-fast rate and is now 8. This makes sense because we have precipitation coming in.
12:45 am (1/12) - About 15 minutes ago we were hit with a plume of type Model Cement and Chalky-Bitter-Pharma with Biologics (TYPE II), Inflammatory and Mercury additives. The Biologic additive is the dominant component.
January 10
Overnight: As the last horrific plumes cleared - which reached past 2 am this morning - the overnight intensity settled at 7.5- and remained steady throughout the night. The ambient poison in the air is the usual mix of Model Cement and Chalky-Bitter-Pharma (lithium?) with Inflammatory and Mercury additives. So yes, the attack on all life continues on our watch.
10:42 am - The intensity that persisted throughout the night (7.25-) continued into the morning, and only in the past 10 minutes has intensity began to increase. Intensity is currently 7.25+ and rising slowly. This toxic plume contains the usual Model Cement and Chalky-Bitter-Pharma (lithium?) type along with the Inflammatory and Mercury additives.
The level of denial that exists among those who pretend this isn't happening is astounding. This level of denial is akin to a child in a treehouse pretending they are owner of some great mansion. Wake up world. This is happening while you continue censoring yourself into a historic level of willful ignorance.
1:53 pm - The previous plume (@ 10:42 am) rose to intensity 7.5+ and then soon dissipated returning the air intensity to 7.5 at which it remains to this time. The ambient type profile in the air now is Model Cement and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. The Chalky type is the dominant component.
3:30 pm - At 2:50 pm we were hit with a plume of type Model Cement and Chalky-Bitter-Pharma with Biologic, Inflammatory, and Mercury additives. This plume has risen slowly in intensity over the past 40 minutes and is now at intensity 8. the Biologic component is TYPE III. Intensity is still rising.
5:19 pm - About 5 minutes ago we were hit with a plume of type Model Cement, Barium, and Chalky-Butter-Pharma with Inflammatory, and Mercury additives. This plume is rising at a medium rate and is now at intensity 7.75+.
The most devastating time in history is fast approaching, and we are living in the beginning of it now.
7:51 pm - At about 7:40 pm we were hit with a plume of type Model Cement with Biologic, Inflammatory, and Mercury additives. Intensity is rising quickly and is already at 8.5. The Biologic additive is TYPE III and is the dominant component.
8:15 pm - The previous plume peaked at 8:05 pm at intensity 9 with Biologics being the dominant component by far. Intensity is now 8.75- and falling at a medium-fast rate.
8:37 pm - A few minutes ago we were hit with another plume. This type is identical to the previous plume (which contained Biologics). Intensity is rising quickly and is already at 9.25 and still rising. This is a TYPE III plume like the last one. If only the world really knew what is being done to them. What a sad time we live in.
8:44 pm - The intensity of the previous plume is now 9.5 with the Biologic additive being the dominant component. This is intense.
10:27 pm - By about 9:30 pm the previous plume had dissipated to 7.25 intensity. This was out evening "break" that we usually get on most days.
At about 10:15 pm we were hit with a plume of type Barium with Inflammatory and Mercury additives. Intensity is rising at a medium-fast rate and is now already up to 8.75-. The Barium type is the dominant component. This is already intense. I am so very tired of being poisoned.
10:45 pm - The intensity of the previous plume is 9.25-.
11:07 pm - The intensity of the previous plume is 9.75+.
11:45 pm - At about 11:15 pm the intensity of the previous plume (Barium) peaked at 10+. Simply no words. It has now dissipated a little down to 9.75-.
12:37 am (1/11) - At about 12:30 pm we were hit with a plume of type Model Cement with Inflammatory and Mercury additives. Intensity is rising at a fast rate and is now already up to 8.5. The Mercury additive is the dominant component.
January 9
Overnight: Last night was typical for recent types. There were no discernible plumes through the night, but intensity swayed between 7.5 and 7.75+. Type profile through the night was the common Model Cement (toluene?) with Inflammatory and Mercury additives. Not much else to report. Just a typical night of poisoning.
10:34 am - At about 8:30 am we were hit with a plume of type Model Cement with Inflammatory and Mercury additives, however, this carries on the new pattern that I have been seeing lately, specifically, that they are really spraying the Inflammatory additive much more often and intensely. Historically, they only concentrated this type at night, between perhaps 7 pm and 1 am, but lately, they have been using this concentrated additive during the night, day, and morning. Today continues that new pattern. This 8:30 am plume reached a concentrated intensity of 9 by 9:30 am. It is now dissipating and, as I type this, is at intensity 8.25+.
In case you don't know, childhood asthma is the new, leading childhood disease while smoking is at an all-time low, and you should not be surprised to discover that vaporized mercury induces lung inflammation (asthma, et. al.). Since we know that chemtrails contain mercury, and we know that mercury causes over 200 of the most common diseases today, the current sickly state of humanity is completely expected.
This, folks, is the world being brought to you by those who fulfill this Scripture:
Quote
"And the nations were angry; and Thy wrath is come, and the time of the dead, that they should be judged, and that Thou shouldest give reward unto Thy servants the prophets, and to the saints and them that fear Thy name, small and great, and (God) shouldest destroy them that destroy the earth.” -Revelation 11:18
The fact that this is happening at this time in history says much about the condition of humanity at this time. God brings judgement at times of massive corruption, lies, deceit, and rebellion. Why is this judgement occurring during this time? Folks, the answer is blatantly obvious.
12:53 pm - At about 12:30 pm we were hit with a plume of type Model Cement and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. Intensity rose quickly peaking at 9+ at about 12:50 and is now slowly declining. The Inflammatory additive is the dominant component being much stronger than the other components. Again, they are really concentrating on the Inflammatory additive in recent days.
2:35 pm - At about 2:20 pm we were hit with a plume of type Model Cement and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. Intensity is rising quickly and is now at 8.75-. The Chalky additive is the dominant component.
3:27 pm - At about 3:20 pm we were hit with another plume of type Model Cement and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. Intensity is rising quickly and is now at 8.75+. The Inflammatory additive is the dominant component.
Read more about the Chalky-Bitter-Pharma type by clicking this link: Chalky-Bitter-Pharma
4:17 pm - At about 4:10 pm we were hit with another plume of type Model Cement and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. Intensity is rising quickly and is now at 8.75. The Inflammatory additive is again the dominant component.
6:18 pm - At about 6:10 pm we were hit with another plume of type Model Cement and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. Intensity is rising at a medium-fast rate and is now at 8.5+. The Inflammatory additive is again the dominant component. Are you seeing the pattern here?
7:41 pm - At about 7:20 pm we were hit with a plume of type Model Cement with TYPE III Biologics, Inflammatory and Mercury additives. Intensity is rising at a medium rate and is now at 8.5-. The Biologic additive is the dominant component.
10 pm - At 9 pm we were hit with a plume of type Model Cement and Sharp Metallic with Inflammatory and Mercury additives. Intensity rose quickly and peaked all the way up at 10 by 9:45 pm. It's now 10:05 pm as I type this and intensity is still extremely intense at intensity 9.5. The dominant component is the Mercury additive. I cannot express how bad this is.
I know that many don't smell and taste from this poison, and also many don't have inflammation from this poison, but either way, it is poison and shortens your lifespan and induces disease. This is the largest and most devastating crime against humanity in human history.
It's now 10:15 pm and the air intensity has increased back up to 10.5. Clearly they are doing layered releases.
11:09 pm - At about 11 pm we were hit with a plume of type Model Cement and Sharp Metallic with Inflammatory and Mercury additives. Intensity is now 9 and rising quickly. The Sharp Metallic type is the dominant component. Horrible!
January 8
Overnight: This was a strong night of spraying. The type profile remained pretty steady throughout the night. The type profile was: Model Cement and Chalky-Bitter-Pharma (lithium?) with Inflammatory and Mercury additives, but the Inflammatory additive was the dominant component by far. Intensity was 8.75- and this intensity remained until about 12:50 pm (all night and all morning).
1:01 pm - The type that has been in the air all night and morning (see above) is just now beginning to dissipate. Intensity is now 8.5- and decreasing at a medium rate (after being strong throughout the night). This is a horrific nightmare for those of us who smell and taste this poison in the air. We just want to be believed, and fortunately, many others smell and taste it as well and we are being believed by more and more who are finally realizing what horrendous crimes are being done to us all. Wake up world. This is happening on our watch.
Please watch and share this video that lays out the recent agenda. This is the nightmare that grows in the fertile soil of public apathy. You can go directly to the page here: https://gsw.bz/fexposed or watch the video below...
3:53 pm - At 3:30 pm we were hit with a medium-slow rising plume of type Model Cement, Chalky-Bitter-Pharma with Inflammatory and Mercury additives. Intensity is now 8.5 and rising. The Inflammatory additive is the dominant component.
6:15 pm - The previous plume dissipated back to 7.25+ by 4:45 pm. It was a nice little "break". At about 5:40 pm we were hit with another plume of type Model Cement and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. Intensity is peaking now at 9+. The Inflammatory additive is the dominant component.
Do you see a pattern? They have really been concentrating the Inflammatory additive for days now making it dominant most of the time. This is a dangerous combination for those infected with blood-clot inducing mRna as this could induce all the disasters associated with increased blood clotting. What a time we live in.
6:34 pm - I thought the previous plume had peaked, but it didn't. Intensity is now 9.75-. It's absolutely horrible.
7:09 pm - The previous plume intensity is now 9.75+.
7:22 pm - We have been hit with a new plume of type Sharp Metallic with Inflammatory and Mercury additives. Intensity rose quickly and has blended with the previous plume to reach intensity 10+. This is absolutely horrible.
10:31 pm - The previous plume was torturous, but cleared to ambient levels by 9 pm. Intensity has been 7.5- since them.
A few minutes ago we were hit with a medium-slow rising plume of type Model Cement with Inflammatory and Mercury additives. The Mercury additive is the dominant component. We'll see how intense this one gets. We have seen numerous enormous plume across the night sky tonight.
12:57 am (1/9) - We were hit with yet another plume at about 11:30 pm. Type is Model Cement with Inflammatory and mercury additives. The Mercury component - once again - the dominant component. Intensity is rising at a medium-slow rate and is now at 8.75- and still rising. When mercury is dominant, life just gets bad because mercury is so horrendous in so many ways. Here is a link to a long list of mercury symptoms. Many of these symptoms come on within minutes of exposure, other take months or years to manifest.
Overnight: An interesting night; somewhat different than other nights. Based on the times I was awake, we were hit with at least 1 plume. There may have been more but I may not have been awake to know.
11:07 am - At roughly 9 am we were hit with a slow-rising plume of type Model Cement with Biologics, Inflammatory, and Mercury additives. Intensity rose very slowly and peaked at about 10:45 am at intensity 8.75-. Air intensity is 8.5- as I type this.
Slow rising and falling plumes are high-altitude releases. They began releasing at high altitudes in 2009 when they first began releasing Biologics in my area. I cannot speak for other areas, but this is when it began in the Bangor, Maine area.
1:22 pm - At about 1:18 pm we were hit with a plume of type Model Cement and Drywall Dust (which always causes strong mercury symptoms) with Biologics, Inflammatory, and Mercury additives. Intensity is rising at a medium rate and is now 8. The Biologic additive is subtle, but present. The Model Cement type is the dominant component.
3:11 pm - At about 2:50 pm we were hit with a plume of type Chalky-Bitter-Pharma with Inflammatory and Mercury additives. Intensity is rising at a medium rate and is now 8.75-. The Chalky type is the dominant component.
5:19 pm - At about 5:05 pm we were hit with a plume of type Chalky-Bitter-Pharma with Biologics, Inflammatory and Mercury additives. Intensity is rising at a medium rate and is now 8.5-. The Chalky type is the dominant component.
January 6
Overnight: A milder-than-usual night. Intensity throughout the night oscillated between 7.25+ and 7.5. Type profile was Model Cement with Inflammatory and Mercury additives. There were no discrete plumes detected. There was low-level biologics detected through the night at intensity 6.5. This is low, but still present and were dwarfed (and hard to pick out) because of the 7.5 intensity of the foreground plumes.
2:50 pm - It's been a typical morning as far as background intensity is concerned, but there have been no discrete plumes throughout the morning, which makes it a very atypical morning. Intensity has oscillated between 7.5- and 7.5+, so it's been pretty steady.
At about 2 pm we were hit with the first discernible plume of the day, but don't discount the damage that breathing the 24/7 ambient poison in the air does. This long-term exposure to medium-intensity poisons is devastating. This 2 pm plume was of type Sharp Metallic with Inflammatory and Mercury additives. Do you see the strange change in pattern here? They have really switched-it-up the past 48 hours. Current intensity is 8.5- and rising at a medium-fast rate.
5:55 pm - At about 5:45 pm we were hit with a plume of type Chalky-Bitter-Pharma with Inflammatory and Mercury additives. The Sharp-Metallic type has dissipated leaving this new profile dominant in the air. Intensity is now 8+ and rising at a medium rate.
10:33 pm - The previous plume was the last plume until now. The air for the past 2 hours has been at intensity 7.25, low for these days. This was our evening "break".
A few minutes ago we were hit with a plume of type Model Cement with Biologic, Inflammatory and Mercury additives.Intensity is rising at a medium-fast rate and is already at 8-.
12:51 am (1/7) - At about 12:40 am we were hit with a plume of type Model Cement with the Inflammatory and Mercury additives. Intensity is rising at a medium-fast rate and is now 8.25-.
1:14 am (1/7) - The intensity of the previous plume is now 8.75+.
January 5
Overnight: Last night was another break in the pattern of 3-plumes at night. Intensity rose and fell slowly (based on the times I was awake). Biologics were present later in the night and continue as I type this (9.47 am). The complete type profile through the night was Model Cement with the Biologic, Inflammatory, and Mercury additives. Intensity ranged between 7.5 and 8.25 rising and falling in the rough shape of a sine wave throughout the night. This is indicative of distant spraying. Plumes travel horizontally along the ground while the edges diffuse becoming "soft" resulting in a smooth rising and falling intensity.
9:50 am - The intensity of the Biologic component as I type this is 8.5-. This is a TYPE II biologic. The current plume profile is Model Cement with Biologic, Inflammatory, and Mercury additives.
12:09 pm - At 11:50 am we were hit with a plume of type Model Cement and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. Intensity rose quickly and is now 8.75. The Model Cement type is the dominant component.
1:03 pm - At about 1 pm we were hit with a plume of type Model Cement and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. Intensity is rising quickly and is now 8.25-. The Model Cement type is the dominant component.
2:58 pm - At about 2:50 pm we were hit with a plume of type Model Cement and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. Intensity is rising at a medium rate and is now 8.25. The Model Cement type is the dominant component.
3:55 pm - At about 3:50 pm we were hit with a plume of type Barium and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. Intensity is rising at a medium rate and is now 8.25. The Barium type is the dominant component.
6:12 pm - A few minutes ago we were hit with a plume of type Model Cement and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. Intensity is rising quickly and is now 8.25+. The Model Cement type is the dominant component.
7:10 pm - A few minutes ago we were hit with a plume of type Model Cement and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. Intensity is rising at a medium-fast rate and is now 8.5-. The Inflammatory type is the dominant component as it normally is at night.
9:37 pm - A few minutes ago we were hit with a plume of type Model Cement and Drywall Dust (which we have not seen in some time) with Inflammatory and Mercury additives. Intensity is rising at a medium-fast rate and is now 8. The Drywall dust has been used during precipitation over the past several years but less often than the Barium type. The Drywall Dust type usually induces strong Mercury symptoms, and they are already starting.
12:21 am (1/6) - At about 12:10 am we were hit with a plume of type Model Cement with Inflammatory and Mercury additives. Intensity is rising at a medium rate and is now 8.25+.
1:17 am (1/6) - The previous plume peaked at intensity 9.25 at about 12:40 am. The plume has now dissipated to intensity 7.75 which is the current air intensity.
January 4
Overnight: Last night they broken the pattern, which, of course, is, in itself, a pattern. If you views last night's log entry, you will see that they hit us extremely hard with the Inflammatory additive which then lasted until about 2 am this morning. In fact, it didn't end at 2 am, it lingered all throughout the night at a lower intensity of 7.5 to 8. That was the entire night, specifically, the Model Cement type with Inflammatory and Mercury additives at a pretty steady intensity between 7.5 and 8 all night.
10:46 am - At about 10:15 am we were hit with a very slow-rising plume of type Model Cement and Chalky-Bitter-Pharma (lithium?) and Inflammatory and Mercury additives. Again, the Inflammatory additive is very dominant. Intensity of this plume is now at 8.25 and still rising slowly.
The mass attack of all live is still underway on our watch. It's been 18 years since I first encountered the spraying on a daily basis. I had hoped that it would end much sooner, but I know it won't end until the anti-Christ pronounces his fake "blessing" on the Earth and people begin to feel better. This will, undoubtedly, be one of the fake "miracles" that will be used to deceive the world into believing he is Christ, when in fact, he is the anti-Christ. I wrote an article explaining this that I hope you will share to help save others from this "strong delusion" (as the Bible calls it) that is now coming upon the entire world.
1:08 pm - About 5 minutes ago we were hit with a plume of type Model Cement and Chalky-Bitter-Pharma (lithium?) with the Inflammatory and Mercury additives. Intensity is rising at a medium rate and is now 8.
2:25 pm - At about 2:10 pm we were hit with a plume of type Model Cement and Chalky-Bitter-Pharma (lithium?) with the Inflammatory and Mercury additives. Intensity is rising at a medium rate and is now 8.5.
3:56 pm - At about 3:45 pm we were hit with a plume of type Chalky-Bitter-Pharma (lithium?) with the Inflammatory and Mercury additives. Intensity is rising at a medium rate and is now 8.25+.
5:20 pm - About 10 minutes ago we were hit with a plume of type Model Cement with the Inflammatory and Mercury additives. Intensity is rising quickly and is now 8.75.
9:47 pm - From about 7 pm until just now, it's been a pretty mild stretch of time. This was our evening "break". The break is now over. We were just hit with a plume of type Model Cement and Chalky-Bitter-Pharma (lithium?) with Inflammatory and Mercury additives. Intensity is rising at a medium-fast rate and is now 8-.
11:06 pm - At about 10:50 pm we were just hit with a plume of type Model Cement with Inflammatory and Mercury additives. Intensity is rising at a medium rate and is now 8.5. The Inflammatory additive is dominant as it usually is at this time.
12:43 am - The previous plume has mostly dissipated and is currently at intensity 7.75+ with the Inflammatory additive being the dominant component (as is usually the case at night). The HAARP Hum is audible at intensity 3 of 5.
January 3
Overnight: Last night's spraying was nearly identical to the previous night's spraying. It was a hard night of spraying which included strong Biologics. Type profile: Model Cement with Biologics, Inflammatory, and Mercury additives. The Biologics and Inflammatory additives were the dominant components, although Mercury was also strong. Hit times (based on the times I was awake) were about 3:50 am, 5:50 am, and 7:30 am. The 5:50 am plume was dominated by Biologics and peaked at intensity 8.75. Intensity of the 3:50 am plume was the strongest peaking at 9.25 with the Biologic additive being the dominant component. This was a bad night of spraying.
10:29 am - At about 10 am were hit with a plume of type Model Cement and Chalky-Bitter-Pharma with the Inflammatory and Mercury additives. Intensity has been rising at a medium-slow rate and is now at intensity 8.75.
12:28 pm - At 12 n we were hit with a plume of type Model Cement and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. Intensity rose quickly and peaked at 8.75 at about 12:20 pm. Intensity is now 8-.
2:19 pm - Here we go. I am just now detecting Biologics in the air. Intensity is rising at a medium-fast rate and is now at 7.75+. The complete type profile is: Model Cement with Biologics, Inflammatory and Mercury additives.
4:50 pm - About 20 minutes ago we were hit with a plume of type Barium with Inflammatory and Mercury additives. Intensity is rising slowly and is now at 8.5+. If you have been following this log, you know that the Barium type usually means precipitation is coming. Let me check weather and radar... Yes indeed. We have rain forecast for tonight. So, once again, the Barium type is predictive of precipitation.
8:01 pm - At about 7:30 pm were hit with a plume of type Chalky-Bitter-Pharma with Biologic (TYPE II), Inflammatory and Mercury additives. Intensity has been rising slowly and is peaked at 8- and is now declining. This is a weaker plume that was clearly released some distance away having lost its intensity and edge resolution over time.
9:04 pm - The previous plume didn't fully clear, even though it was weaker then most plumes. At about 8:40 pm we were hit with another plume that was a direct hit. Intensity increased from 7.75 to 9 in about 12 minutes. The type profile was a combination of Chalky-Bitter-Pharma and Inflammatory and Mercury additives. If you have been reading this log for any time, you know that the Inflammatory additive normally dominates evening from 7 pm (roughly) until midnight or later. This was no exception. In this case, the Inflammatory component dominated the other plume types. The Biologic additive is also present at a lower level. Overall intensity has dropped quickly and is now at 7.75-.
10:55 pm - At about 10:40 pm we were hit with a plume of type Model Cement and Chalky-Bitter-Pharma with the Inflammatory and Mercury additives. Intensity is rising at a medium rate and is now 9- and still rising. We are living in the most corrupt and devastating time in history.
11:27 pm - About 10 minutes ago we got hit with another plume of type Model Cement and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. The Inflammatory additive is dominant, as is usually is at this time of the night. Intensity is rising quickly and is already at 8.75+. What a nightmare this is.
12:14 am (1/4) - The previous plume has reached 9.75+ and the dominant component is the Inflammatory additive. Our veins are sticking out of our arms and we feel the inflammation in our heart, lungs, arms, and legs, and head. The pressure is intense.
I know it's easy for some people to dismiss because they are not having inflammatory reactions or they are not being spraying as intensely in their area, but this will not always be the case. The spray intensity will continue to increase and formulas will change so that more and more people have reactions. People will wish they had become involved and ended this historic crime. It's only a profound shame that people wait until they are personally affected, but it is the waiting that enables the crime to continue. What an absolute nightmare for those who are sensitive to this particular formula.
January 2
Overnight: A hard night of spraying which included Biologics. Type profile: Model Cement with Biologics, Inflammatory, and Mercury additives. The Biologics and Inflammatory additives were the dominant components. Hit times (based on the times I was awake) were about 3:50 am, 5:45 am, and 7:30 am. Intensity of the 5:45 am plume was the strongest peaking at 8.75 with the Biologic additive being the dominant component.
10:07 am - At 8:27 am we were hit with a plume of type Model Cement with Biologic, Inflammatory, and Mercury additives. Intensity of this plume peaked at 8.5-. Ambient air intensity now is 7.5+.
The attack on all life continues.
12:16 pm - At 11:27 am we were hit with a fast-rising plume of type Model Cement and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. Intensity peaked at 8.5- and has now declined to 7.75-
2:41 pm - At about 1:40 pm intensity began to increase slowly to 8 and has sat at that level ever since. This is high-altitude layering to keep intensity high, but not extremely high. High-altitude releases produce slow increases and decreases in intensity over time The type profile is the same as reported in the previous plume.
3:22 pm - A few minutes ago we were hit with a plume of type Model Cement and Blunt-Metallic with Inflammatory and Mercury additives. Intensity is rising quickly and is now at 8.75-.
The poisoning of the world continues on our watch.
5:03 pm - A few minutes ago we were hit with a plume of type Model Cement and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. Intensity is rising at a medium rate and is now at 7.75+.
8 pm - At about 7:30 pm we were hit with a plume of type Model Cement and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. Intensity is rising at a medium-slow rate and is now at 8.5+.
10:01 pm - Since the last plume dissipated, air intensity remained at intensity 7.25+. This was our evening "break" that we usually get in the evening.
At about 10:55 pm we were hit with a strong, fast-rising plume of type Model Cement with Inflammatory and Mercury additives. Intensity is already (10:06 pm) at 9. As I said, it was very fast rising. This was likely a direct, vertical, partial hit, so it will dissipate quickly. My wet mask is already half way to saturation.
January 1
Overnight: A wonderfully-mild night with much less globalist's-poison than we usually have (sarcasm). Intensity throughout the night ranged between 7 and 7.25 with no discernible plumes. The ambient air always has the typical Model type with the Inflammatory and Mercury additives, but it did not exceed intensity 7.25 throughout the night, based on the times I was awake.
7:44 pm
Right at 12 noon we were hit with a slow-rising plume of type Model Cement with Inflammatory and Mercury additives. Intensity rose slowly reaching intensity 8.25 by 1:30 pm.
At about 1:30 pm we were hit with a very fast-rising plume of type Model Cement with Inflammatory and Mercury additives. This plume hit intensity 9 by 1:37 pm and continued up to intensity 9.5- just a bit later. This plume eventually dissipated falling back to intensity 7.5+
At 4:42 pm we were hit with a fast-rising plume of type Model Cement and Chalky-Bitter-Pharma with Inflammatory and Mercury additives. I did not record the peak intensity of this plume.
It's now 7:48 pm at I type this and intensity has risen a little in the past 5 minutes indicating another hit. Intensity is rising at a medium rate and is now 7.75+. Type is Model Cement and Chalky-Bitter-Pharma with Inflammatory and Mercury additives.
It is the first day of a new year and the attack against humanity continues on our watch.
Did you know the Chalky-Bitter-Pharma type appears to rapidly deplete magnesium and potassium? Read more.
10:57 pm - Tonight, since the previous post at 4:42 pm, air intensity has gently oscillated between 7.5- and 7.75, so it's been a pretty uneventful night of poisoning. Just a straight-and-level stream of medium-intensity poison.
The attack on all life continues.
Last edited by Russ Tanner; 02/01/2305:45 AM.
Russ Tanner, Founder, Administrator, Programmer GlobalSkywatch.com My Chemtrail Story
