Daily Log of Chemtrail Spray Events: Log #18: June 2022
June 29
Overnight: A typical night of spraying. Intensity ranged from 7.5 to 8.5. Not much different here.
12:34 pm - This morning was somewhat milder than usual for this time of day with plume intensity between 7.25 and 7.75.
At about 9:30 am we were hit with a Model Cement type plume with Biologic, Inflammatory, and Mercury additives. Intensity rose to, and maintained a level of 8 all morning. The Biologic additive was the dominant type. The intensity hardly dropped at all.
At about 11:45 am we were hit with another plume. Type was Barium with Biologic, Inflammatory, and Mercury additives. This bumped the previous plume's intensity up from 8 to 8.75 which is the level it's at now. The Biologic additive is the dominant component.
Remember, they began biologic releases in February 2009 in my area. I have shared information on that previously.
3:18 pm - About 20 minutes ago we were hit with another plume of type Barium with Biologic, Inflammatory, and Mercury additives. Intensity is now 8.5 and rising. The Biologic additive is the dominant component.
4 pm - We were just hit with another plume of type Model Cement with Biologic, Inflammatory, and Mercury additives. Intensity is now 8.25 and rising. The Model Cement type is the dominant component.
10:04 pm - This has been the worst day in recent history. Biologics have dominated the air all day. Intensity has ranged from 8.25 to 9.75. The Biologics component has been piercing and overpowered all other components throughout the day. It has been brutal.
Is this something in preparation of July 4 weekend? I do know there is a definitive history of spraying harder on holidays; a few days before holidays as well. If you are in this area and had symptoms over the past 3 days, I'd love to hear from you.
At about 9:25 pm we were hit with another Model Cement type plume with extremely strong Biologics, Inflammatory, and Mercury additives. The intensity of the Biologic component reached 9.75 and is currently still at 9.25+ and falling slowly.
The people of the world are sadly asleep. What we have experienced over the past 2 years is only the prelude. Those who have refused to learn the truth about what has been going on will soon be in for a very rude awakening when the globalists unleash their plan in full force. Those who have refused to learn will be deceived and will likely buy into the world system, and there will be no remedy for them, no recovery, no hope. Nothing could be more sad, but it is the choice they have made.
Wake up world. Time is very short... very short!
June 29
Overnight: Horrendous night of spraying. We had plume on roughly 2-hour intervals throughout the night. Peak intensity ranged from 8.25 to 9. Type for all plumes was Barium with very strong Inflammatory and Mercury additives.
9:37 am - The last plume hit us just after 9 am. Type is the same as overnight: Barium with very strong Inflammatory and Mercury additives. Current intensity is 9+ and rising at a medium rate.
I have no doubt that the inflammation and other symptoms induces by this poisoning have ended lives. Wake up world, this is happening.
9:45 am - Just to give you a snapshot. The intensity of the previous plume has risen to 9.5. The symptoms, the inflammation, and the taste are absolutely horrendous. This is your tax money at work.
1:29 pm - At about 1 pm we were hit with a plume of type Barium with Inflammatory and extremely strong Mercury additives. Intensity is presently 8.5 and rising slowly.
2:14 pm - The intensity of this plume has not let up. Intensity is now 9.25. We have had no breaks in intensity since 1 pm.
2:36 pm - The previous 1 pm plume is still in the air and is at intensity 9.5. This plume contains very high mercury and is causing us to have dramatic mercury symptoms. We know mercury symptoms well so we know how to handle them.
If you're being sprayed with this type too, you may feel anxious, depressed, unfocused, emotional, fearful, and all of the things that mercury causes. Here is a list:
3:40 pm - The air intensity began lowering a few minutes ago. Intensity is now 8.25 and falling. The mercury symptoms have been horrendous. The Barium type often has a very strong Mercury additive, and it definitely did today.
4:30 pm - We're being hit with another plume of type Barium with Inflammatory and very strong Mercury additives. Intensity is 8.5 and rising at a medium rate. The Mercury additive is the dominant component.
12:28 pm (6/30) - I spent the evening in Bangor on 6/29 and did some ax throwing at a restaurant with family. They had less intense plumes in Bangor than we had at home, but they were the same type.
At roughly 6 pm we were hit with a Biologic type plume. Intensity rose to about 8.75 and maintained that level for hours.
After getting back home, spraying in the evening was typical with increased Inflammatory additive, which is the norm these days.
June 28
Overnight: Typical night of spraying. We had strong plume beginning at roughly 3 am and continuing into the later morning. I do not have specific times, but they likely followed the typical 3, 5, 7 am pattern. The plumes I tasted were all Barium type plumes with strong Inflammatory and Mercury additives. I woke up with strong mercury symptoms so this additive was likely strong throughout the night.
11:06 am - We have been hit with very strong plumes this morning. Times have been about 8:40 am and then again at about 10:40 am. The type for all plumes has been the Barium type with strong Inflammatory and Mercury additives. Intensity of the 8:40 am plume peaked at 8.75. The peak intensity for the 10:40 am plume was 9.25.
The last plume is in the process of dissipating and is currently at intensity 8.5 and falling.
Folks, they are not spraying known poisons on you to help you be healthy. You are witnessing the largest crimes against humanity in history being committed on your watch. Please wake up your friends and be involved daily before someone you love succumbs to the poison being sprayed on us all.
1:40 pm - About 15 minutes ago we were hit with another plume of type Barium with strong Inflammatory and Mercury additives. Intensity is now at 9 and rising at a medium rate.
The attack on all life continues.
7:55 pm - We've had several plumes today. They have all been of type Barium with Inflammatory and Mercury additives. Peak intensity has been between 8.25 and 8.75 for all plumes. They are likely spraying the Barium type because there have been remnants of precipitation remaining from yesterday, and so they are hypernucleating it away, as they usually do, and they normally use the Barium type to do this.
About 15 minutes ago we were hit with the latest Barium type plume. Intensity is now 9 and rising slowly.
8 pm - The previous Barium plume is now at intensity 9+ and still rising.
8:37 pm - The previous plume has dissipated to about intensity 7.75, but we just got hit with a plume of type Model Cement with the Inflammatory and Mercury additives. Intensity is now 8 and rising. Intensity is fast-rising. This is the first Model Cement type plume of the day.
11:20 pm - 10 minutes ago we were hit with a plume of type Model Cement with the Inflammatory and Mercury additives. Intensity is rising at a medium-fast rate and is currently 8. Remember, fast-rising plumes indicate low-altitude releases. Nothing like being forced to pay taxes to the entity that poisons me. What an unbelievable world we live in.
12:51 am - A few minutes ago we were hit with a Biologic plume. Intensity is rising at a medium rate and is now 7.75+.
June 27
Overnight: A slightly-milder than usual night of spraying.
I spent the afternoon in Portland. We had rain during the drive so naturally we had the Barium chemtrail type which is almost always used before and during rain. Intensity was worse in Bangor, Waterville, and Augusta. As usual, populated areas are hit worse.
While in Portland, we were hit with the strong evening plume at 5:08 pm. I told Laura, "It must be 5 pm because we were just hit with a strong Inflammatory plume. She checked the time and it was 5:08 pm. If you look over the history of my time in Portland, this is a pretty consistent pattern, specifically, that they hit Portland with the Inflammatory type at just after 5 pm on weeknights. I'm not sure if this applies to weekends or not.
June 26
Overnight: Typical night of spraying. Based on the times I was awake, I estimate that we again had plumes a little before 3 am and 5 am, and then again a little after 7 am. Type was the common Model Cement type with Inflammatory and Mercury additives. The mercury symptoms were heavier than usual this morning.
9:39 am - If you have been keeping up with this log, you know that the current pattern is this: Plumes reach ground level at about 3-, 5-, 7+, and 9+ am. This morning is no exception. We were hit with a plume at about 9:30 am. Type is the common Model Cement type with Inflammatory and Mercury additives. Intensity is currently 8.75 and rising at a medium rate.
This is one of the most important things I use to protect myself: Wet Mask
12:41 pm - And so it begins. We were just hit with a plume of type Model Cement with Inflammatory and Mercury additives. Intensity is now 8.25 and rising at a medium rate. The Model Cement type is the dominant component.
1:51 pm - The skies are covered with the hazy strands that usually turn to artificial overcast conditions. The previous plume has dissipated. The ambient air intensity is now 7.75 with the Model Cement type and the Inflammatory and Mercury additives. The Model Cement type is the dominant component.
3:10 pm - The skies have cleared somewhat, but the ambient poison in the air remains at 7.5 with the typical Model Cement type and the Inflammatory and Mercury additives.
6:15 pm - Well, here we go. We are being hit with a slow-rising plume of type Model Cement with Biologic, Inflammatory, and Mercury additives. Intensity is now at 7.75+ and rising slowly.
10:01 pm - At 9 pm we were hit with a subtle Biologic plume. Intensity rose to 7.75+ but has since dissipated to 7.25+. This is likely our nightly break. Of course, we should not be sprayed with anything, especially by our own government. Crimes are being committed unlike anything in history and all governments of the world are working together intimately. They are ALL controlled by the same group of globalists.
Wake up world. The truth is right in front of you.
10:26 pm - Well, that didn't take long. The air is now increasing in intensity. Intensity is now 7.75 and rising at a medium rate. Type is Model Cement with the Barium, Inflammatory, and Mercury additives. The Barium additive is the dominant component.
The epic crimes against humanity continue.
10:41 pm - The intensity of the previous plume has declined to 7.5.
June 25
Overnight: I typical hard night of spraying. Intensity ranged from 7.75 to 8.5 based on the times I was awake. We had the typical 4 plumes at 2-hour intervals: ~3 am, ~5 am, ~7:15 am, and 9:20 am. Type was Model Cement and Barium with Inflammatory and Mercury additives. I am hearing the HAARP Hum this morning. Intensity is strong but not maximum. I typical quantize the HH intensity into 4 levels, 1 being the weakest and 4 being strongest. The intensity this morning was 2.
9:50 am - We still have strong residue from the 9:20 am plume. Intensity is currently 8.25 and falling slowly.
12:20 pm - At about 11:50 am we were hit with a plume of type Model Cement with Inflammatory and Mercury additives. Intensity is now 9 and rising slowly. The Model Cement type is the dominant component.
1:40 pm - At about 1:25 pm we were hit with a plume of type Model Cement with Inflammatory and Mercury additives. Intensity is now 8.5 and rising at a medium rate. The Model Cement type is the dominant component.
5:36 pm - We were just hit with a plume of type Model Cement with Inflammatory and Mercury additives. Intensity is now 8 and rising at a medium rate. The Model Cement type is the dominant component.
7:20 pm - At about 7:10 pm we were just hit with a plume of type Model Cement with Biologics, Inflammatory and Mercury additives. Intensity is now 8.25 and rising at a medium rate. The Biologic additive is the dominant component.
The attack on all life continues.
11:20 pm - We were just hit with a plume of type Model Cement with Biologics, Inflammatory and Mercury additives. Intensity is now 8 and rising fairly quickly. The Biologic and Inflammatory additives are the dominant components.
June 24
Overnight: Milder-than-usual night. Intensity was 7.25 throughout the night (based on the times I was awake). Type was the typical Model Cement type with Inflammatory and Mercury additives.
8:42 am - At 7:48 we were hit with plume of type typical Model Cement type with Inflammatory and Mercury additives. Intensity rose to 7.5 and has been at that level ever since.
8:55 am - Shortly after my previous entry, air intensity began to increase. It's now up to 7.75 and rising slowly+. Type is the same as mentioned previously.
The attack on all life continues.
9:01 am - The intensity of the previous plume is now up to 8.25 and still rising.
12:46 pm - The sky has become overcast and - no surprise - we were just hit with a plume containing Biologics. Remember, they usually use biologics with bad weather. They likely do this so people will blame their cold/flu on the weather. Think about it. That is what we've been told for decades... that weather causes illness. Intensity of this plume is at 8.25 and rising at a medium rate.
2:06 pm - At about 1:45 pm we were hit with a plume of type Barium with the Inflammatory and Mercury additives. Intensity is now 8.5 and rising.
2:39 pm - At about 2:20 pm we were hit with a plume of type Barium with Biologics, Inflammatory, and Mercury additives. Here we see this pattern again when they spray Biologics shortly after a primary plume type. Intensity of this plume is 8.25. The Biologic additive is the dominant component.
4:41 pm - We were just hit with a plume of type Barium with Inflammatory, and Mercury additives. Intensity is 8.25 and rising at a medium rate.
5:24 pm - The previous plume is now at intensity 8.75+. This plume is lasting a long time so it may be a layered plume (2 or more plumes released within a short period of time).
11:36 pm - Since the previous plume, we have had 2 more plumes.
The current plume is a Model Cement type plume with very strong Inflammatory and Mercury additives. Intensity is currently 8.75 and rising quickly. The fact that this plume is rising quickly means it is a direct hit from overhead (not lateral) and that it was released at low altitude. We can also expect that it will declined rapidly as well.
Nothing like living in a world where your tax dollars buy the poison you breath. What extremely wicked times we live in.
June 23
Overnight: Bad night. We had the typical 3 plumes (based on the times I was awake) at roughly 3 am, 5 am, and 7 am. Usually we have a total of 4 early-morning hits. The 3 am and 5 am hits reach ground level 10 to 15 minutes before the top of the hour (ex. 2:50 am). Then, the 7 am and 9 am hits reach us at 15 to 30 minutes after the top of the hour (ex. 7:15 am). The type was Model Cement with Biologics, Inflammatory and Mercury additives. Peak intensities ranged from 8.25 to 8.75. So overall, a bad night of spraying.
9 am - It just now hit 9 am exactly and, sure enough, we are getting our 4th hit of the morning as I was typing the previous paragraph. Intensity has increased rapidly and is already at 8.5 and still rising. Type is the Model Cement and Barium types with Inflammatory and Mercury additives. I do not detect a biologic component with this hit.
9:45 am - I am now detecting the Biologic component in the air. Intensity of this component is 8.5 and rising quickly. I have seen this phenomenon before, where the Biologic component hits us 20 to 45 minutes after a primary chemtrail type (such as the Model Cemen type).
Does this mean this is a separate plume being released by itself or is this a component included in the original plume but falling to ground level more slowly? I have witnessed this out-of-phase relationship between Model Cement type plumes and Biologic plumes for months now. It occurs about 25% of the time usually with early morning plumes (3 am to 9 am). For what it's worth, one day we'll know why this happens this way.
10:21 am - The previous plume has not dissipated but is still getting stronger. This is likely a "layered release" where another plume is released soon after the initial plume so that the initial plume does not have time to dissipate.
The intensity of this plume is now 9 and rising slowly. Since the Barium type is being used, do we have rain headed our way? I'll take a look at radar now.
So, I just looked at radar and yes, as expected, we have a large front headed our way. Remember, the Barium type chemtrail is sprayed up to 12 hours ahead of incoming storms (occasionally 24 hours ahead of storms). Look at the radar capture that I just took below. I have said for years that the Barium chemtrail type is a 95% reliable indicator that we have incoming precipitation:
6:21 pm - This has been the strongest day of mercury exposure that I have experienced in recent history. It has been absolutely horrible, and this is with almost no persistent plumes in the sky at all. Moral of the story is this: There is no direct correlation between visible trails in the sky and the amount of fallout reaching ground level. Why? Because they are spraying very short trails at high altitudes and these trails produce ground-level intensity that is just as bad as days when the sky is filled with persistent trails.
Back to today...
We have had numerous plumes throughout the day. All of them were of type Model Cement with Inflammatory and Mercury additives. The Mercury additives has - by far - been the dominant component. My mercury symptoms are soaring. It's absolutely horrible. The taste, smell, and resulting symptom set has been nightmarish.
I'll make another entry later.
8:41 pm - The entire day has been horrible, until about 7:30 pm when the air dropped to 7.25. This was our nightly "break" that I so look forward to.
At 8:25 pm we were hit with a very strong, very fast rising plume of type Model Cement with Inflammatory and Mercury additives. Intensity is now 9 and seems to have just peaked.
What a world we live in, being perpetually poisoned by globalists while most of the population pretends everything is OK.
By the way, the huge storm front that was approaching us has been decimated by the Barium hypernucleation they have been doing all day. Look at its current condition...
A now for something for those who don't know...
10:30 pm - We are just now getting hit with another plume. Type is Model Cement with strong Inflammatory and Mercury additives. Intensity is rising at a medium rate.
June 22
4:47 am - We were just hit with a plume of type Model Cement with the Inflammatory and Mercury additives.
4:59 am - The previous plume is at intensity 9. The Inflammatory additive is the dominant component.
9:43 pm - I have not tracked plume times today, but they hit us at about 2 hour intervals throughout the day. The type used in all plumes today was Model Cement with Biologic, Inflammatory, and Mercury additives. The Biologic additive was the dominant component in every plume. The peak intensity of all plumes ranged between 8.25 and 8.75. So overall, it was not a "horrible" spray day, but considering that we should not be getting sprayed at all, it's astonishing that they are getting away with such a crime against humanity.
Regardless of what people think of the fact that I report on this daily, I do it with no doubt and no regrets. I do this because I know, without doubt, that this truth will all come out one day fairly soon. When this all comes out, many will wish that they had the resolve to speak up and tell the truth. So I encourage you to speak the truth, with kindness and respect, and with 100% confidence.
Usually acts done in fear become regrets. Don't act in fear so you won't have regrets.
10:05 pm - We've just been hit with a powerful plume of type Model Cement with intensity Inflammatory and Mercury additives. We were hit about 7 minutes ago and intensity is already up to 8.75 and rising. The Inflammatory additive is the dominant component.
We normally get hit hard with the Inflammatory additive every evening. Usually it begins earlier in the evening. Nevertheless, this is the hardest hit of the day. Intensity is already at 9.25 in just the time it took me to type this... and still rising.
12:21 am - About 45 minutes ago we were hit with another plume identical to the previous one.
June 21
Overnight: Once again, we had Biologics during the night. We had several plumes through the night. The type of these plumes (based on the times I was awake) was the Model Cement type with Biologic, Inflammatory and Mercury additives. Intensity was milder then recent nights peaking between 7.75 and 8.25.
8:59 am -
At about 7 am we were hit with a plume of type Model Cement with Biologic, Inflammatory, and Mercury additives. The Biologic additive was the dominant component peaking at intensity 8.75.
At 8:57 am we were hit with a plume of type Model Cement with Biologic, Inflammatory, and Mercury additives. This plume is currently in the air. The Biologic additive is the dominant component. The current intensity 8.75 and rising quickly.
Please beware of the potency of these biologic components. I have seen for years how continued spraying of these types results in outbreaks of "cold and flu" symptoms over large areas.
11:56 pm - We just got hit with a Biologic plume. Intensity is already 8.25 and rising quickly. What a day!
10:47 pm - I spent the day in Portland and Cumberland. Drove down on I-95. The Biologics in the air were pretty intense all the way until south-Augusta. Just after we passed Augusta the intensity in the air dropped from 8.5 to 7.5. That's a huge drop in intensity.
The intensity in Cumberland and Portland remained at 7.5 until 5:40 pm. At that time we were hit - while in Portland - with a plume of type Model Cement with the Biologic, Inflammatory and Mercury additives. Intensity quickly rose to 8.5+. The Inflammatory additive was the dominant type.
On the way home, heading back up north towards Bangor, intensity dropped to 7.5+ north of Portland near Cumberland. Intensity remained between 7.5 and 7.75 all the way home.
As I type this, intensity is 7.5+ and is the same type as we had all day. The Inflammatory additive is the dominant additive.
The attack on all life - sometimes mild and sometimes brutal - continues. It's usually brutal these days.
June 20
Overnight: Biologics Again. Based on the times I was awake, we were hit with Biologic plumes at about 3 am, 5 am, 7:20 am, and again at 9:30 am. One day before too long, a tour of the facilities where all this toxic was manufactured and grown will be televised, and those who did not believe will wish they had listened. Perhaps, but following some safety protocols, they could have saved the lives of those they loved.
Please don't set yourself up for regret. Take precautions to protect yourself, build your immune system, and work politically to raise awareness of this epic crime against humanity so it can be stopped sooner rather then later.
10:51 am - The previous plume is now mostly dissipated. Its current intensity is about 8.25 and falling slowly.
3:25 pm - We have been hit with several Biologic plumes today on fairly even intervals. The complete type profile is Model Cement type with a TYPE II (fly-symptom inducing) Biologic additives. Approximate times we were hit are 11:30 pm, 1:20 pm, 3:15 pm. Intensity of each plume peaked between 8.25 and 9. This is a piercing Biologic type, that same type we had all day yesterday. This is happening folks.
4:01 pm - Intensity of the previous plume is now 9 and still rising slowly.
5:21 pm - The intensity of the previous plume dropped off and we were hit with a new plume at about 5 pm. Type is Model Cement with Inflammatory and Mercury additives. Intensity has risen fairly quickly and is already up to 8.75 and still rising. Biologics are still lingering in the background from the previous plume, but this new plume does not have a biologic component.
The HAARP Hum is audible today but at a relatively low level. I can only hear it in a silent environment.
9:46 pm - At about 8:47 pm we were hit with another plume. Type was Model Cement with the Inflammatory and Mercury additives. Intensity peaked at 9 and has now dissipated to 7.5.
10:01 pm - We just got hit with another plume of type Model Cement with the Inflammatory and Mercury additives. Intensity is already at 8.5 and rising quickly.
June 19
Overnight: Medium intensity night. Type was Model Cement with Inflammatory and Mercury additives. Intensity was 7.5+ throughout the night based on the times I was awake.
11:03 am - The same has continued this morning, until about 10 minutes ago. We were hit with a plume of type Biologic with the Inflammatory and Mercury additives. These days, all biologics are TYPE II (flu-symptom inducing). Intensity of this plume is now 7.75+ and rising slowly. The Biologics type are the dominant component.
Welcome to the apocalypse.
11:14 am - The intensity of the previous plume is now 8.5 and rising. Keep your immune systems strong.
10:36 pm - I spent most of the day in Bangor today. The air was horrible. They released Biologics that were intense throughout the entire area. Intensity was between 8.75 and 9.5 throughout the afternoon and into the early evening. The Biologic type was also present when I left my house, so they sprayed this over a large area, no surprise.
The intensity was so high that some immune-compromised people will surely get sick. If they do this again tomorrow, many more will get sick. The Biologic was TYPE II which is the type that causes flu-like symptoms.
I got home at about 6:30 pm (roughly) and the air was still saturated with the Biologic type. At roughly 8 pm the Biologic plume dissipated and dropped to 7.5 in about 40 minutes. Intensity since then has been between 7.25 and 7.5, so this is our nightly "break".
10:52 pm - Well, that didn't take long. We are now getting hit with a plume of type Model Cement with the Inflammatory and Mercury additives. Intensity is rising quickly and is now at 7.75.
2:02 am - At about 1:20 am we were hit with a strong, fast-rising plume of type Model Cement and Biologics. This plume peaked at 8.75 in about 20 minutes and then dissipated.
June 18
Overnight: An average night of spraying. Type was the Model Cement and Barium types with the Inflammatory and Mercury additives. Intensity was 7.5 throughout the night based on the times I was awake.
11:18 am - At about 9 am we had a plume of the same type that peaked at 8.25 and lasted about an hour before dissipating.
Now, intensity has settled to 7.5+ under overcast skies.
The attack against all life continues on our watch. Will you have the courage to speak truth to those you care about today? I do hope so.
11:26 am - No surprise. It's approx. 2 hours from the last plume and we are now getting hit with another. Type is Sedative-Stimulant and Biologics with the Inflammatory and Mercury additives. Intensity is 8 and rising as a medium rate.
12:38 pm - The previous plume is now at intensity 8.25.
11:38 pm - I spent most of the afternoon and early evening in Bangor. The air was horrible throughout the entire area. Like yesterday, the plume were quite evenly spread over a large area. Type was Model Cement and Copper with strong Inflammatory and Mercury additives. The Inflammatory additive was the dominant type but the copper was strong enough to make the air taste horrible to me. Intensity was high and ranged from 8.5 to 8.75, which is quite extreme.
I fully realize that some people have no reaction to this, but others have a huge reaction. Some people smell and taste it in the air while others do not. Please don't be fooled if you feel or taste nothing. These chemtrails are in the air and knowing what we know, damage is being done even when someone feels no effect. In fact, I believe the designers of this human-spray-program intend to allow as few as possible feel or taste it, which is why it's even more important that those who do speak up.
Right now (11:44 pm) the type is the same combination. Intensity is 8.5+. The ratio between the components is the same that it has been all day. My wet mask is doing a good job of keeping the taste our and the symptoms minimized.
June 17
Overnight: A bad night of spraying. The Barium type was used throughout the night because we are now having rain. They normally spray the Barium type ahead and during rain or snow. The toxic spraying over your head also included the Inflammatory and Mercury additives. The Mercury additive was the dominant component throughout the night based on the times I was awake. Intensity was between 7.75 and 8.75 throughout the night.
Are you having bad sleep, shallow sleep, or waking up frequently? Mercury is likely the cause.
10:17 am - Type in the air right now is still the Barium type with the Inflammatory and Mercury additives. Intensity is at 8.75+ and rising slowly. We are having very light rain. We rarely have any other kind because of hypernucleation which causes the atmosphere to hold more water lowering or stopping rainfall.
10:43 am - Intensity of the previous Barium type plume is now at 9.25 and still rising. What a nightmare.
10:56 am - I've had my wet mask on for less than an hour and it's almost dry already. Why? Because that is exactly what the Barium chemtrail type does. This is why they spray it during rain and snow.
11:08 am - Intensity of the previous plume is now at 9.75 and still rising.
2:55 pm - The previous plume finally dissipated around 12:30 pm. Then at about 2 we were hit with another plume of type Barium and Model Cement with strong Inflammatory and Mercury additives. Intensity of this plume is now 9.5 and still rising slowly.
3:09 pm - The previous plume is now at intensity 10. It does not get any worse than this.
Addendum (entered 6/18) - Yesterday I traveled over a pretty large area from Calais to Machias to Cutler. This took hours to drive. Throughout the entire area the Barium and Model Cement type plume persisted along with the Inflammatory and Mercury additives. Intensity was only a little less than my own area ranging from 8.75 to 9.25. When I left my house, the intensity of this plume has dropped to 9.75.
Around 5:50 pm while on this drive, the plume began to dissipate, and as I backtracked home, I found that the plume had dissipated and the air intensity settled back to it's current "normal" value of 7.5.
The moral of this adventure is that the spraying covers very large areas with uniform coverage. This massive coverage was certainly a response to the rain we were having, although we ended up only having a light sprinkling. We rarely have medium or heavy rain. They hyper-nucleate the rain away leaving only a semblance of rain. Anyway, these large areas are covered using high altitude releases so that they falling plume widens maximizing coverage. As the edges diffuse, one plume will mix with the next creating a uniform "blanket", like weaving in the sky.
I have witnesses these large coverages many, many times. I have seen large areas of rain become rapidly dissipated - on 1 hour - from the hyper-nucleation. This long trip yesterday only punctuates my past experiences with large-coverage releases.
Intensity throughout this massive coverage area was, as I mentioned earlier, 8.75 to 9.25 (extreme) and I'm sure the sensitive folks were having a day of aches, pain, and more, thanks to your tax dollars at work in the hands of globalists with perverse plans against you.
June 16
Overnight: A median night of spraying. Intensity through the night was between 7.25 and 7.75. Type was the typical Model Cement type with the Inflammatory and Mercury additives.
10:37 am - Air intensity this morning has been between 7.5 and 7.75. At this moment, intensity is 7.75+ and rising so we were just hit with a plume. Type is the typical Model Cement with Inflammatory and Mercury additives.
10:06 pm - There have been only minor changes in the air today, however, most of the afternoon we had Biologics in the air. Intensity of the biologics ranged from 7.75 to 8.
At about 8:30 we had our evening "break" where intensity went down to 7.25.
As I type this, it's 10:13 pm and we are being hit with a Biologic plume. Intensity is 8 and rising quickly. This biologic plume is a TYPE II which is basically the only type they have used for a long time.
The public has been so conditioned to ignore the absolute mess the world has become. We are all going to pay a horrible price for this public negligence.
11:14 pm - We were just hit with a plume of type Model Cement with very strong Inflammatory and Mercury additives. We got hit a few minutes ago and intensity is already up to 8.5 and rising quickly. The Inflammatory additive is the dominant component.
June 15
Overnight: Air intensity though the night was 7.5 to 7.75. Earlier in the night intensity was stronger 7.75. After about 5 am intensity changed to milder 7.5.
6:48 am - At about 6:35 am intensity began to increase at a medium-slow rate. Type is Model Cement and Copper with the Inflammatory and Mercury additives. Current intensity is 7.75 and increasing slowly.
The attack on all life continues.
9:10 am - The previous plume peaked at 8.25 then subsided as a medium rate.
About 15 minutes ago we were hit with a plume of type Model Cement with the Inflammatory and Mercury additives. Current intensity is 7.75 and increasing at a medium-slow rate.
9:51 am - About 5 minutes ago we were hit with a plume of type Model Cement with the Inflammatory and Mercury additives. Current intensity is 8.25 and increasing at a medium rate.
2:53 pm - We've had 3 plumes since the last entry. We just now got hit with the third one. All have been of type Model Cement with the Inflammatory and Mercury additives. Intensity is now 8.5 and rising.
4:10 pm - We were hit with a plume about 5 minutes ago. Type is Model Cement with the Inflammatory and Mercury additives. Intensity is already 8.5 and rising quickly.
10:01 pm - We have had 3 plumes since the last entry. They have all been of type Model Cement with the Inflammatory and Mercury additives.
For the past 3+ hours we have had Biologics in the air. This plume rose in intensity slowly and declined slowly peaking at 8.5. In fact, it spent most of its time at 8.5 but has now dissipated to 7.25. This was a Type II biologic (induces flu-like symptoms).
10:42 pm - We were just hit with a plume of type Model Cement with the Inflammatory and Mercury additives. Intensity is 8 and rising at a medium rate. The Inflammatory additive is the dominant component as it usually is in the evening.
Throughout the afternoon and evening, we have had very strong mercury in the air (based on the taste and symptoms). Mercury was the dominant component throughout the afternoon.
June 14
Overnight: We were hit with 4 plumes again last night. This is happening often these days. Type was Model Cement with Biologic, Inflammatory, and Mercury additives. Times were ~2:55 am, ~4:55 am, 7:20 am, 9:31 am.
10:35 am - The air is currently 7.75 and rising slowly. Type is Model Cement with Inflammatory and Mercury additives.
2:01 pm - At 1:09 pm were hit with a plume of type Model Cement and Copper with Inflammatory and Mercury additives. Intensity rose quickly and peaked at 8.75. Intensity is now at 7.75.
5:56 pm - I spent much of the afternoon in Bangor. I didn't detect any discrete plumes, but ambient intensity ranged from 7.75 to 8. Type throughout Bangor was Model Cement with Inflammatory and Mercury additives.
At about 5:25 pm were hit with a plume of type Model Cement with Inflammatory and Mercury additives. Intensity is now 8.5 and is rising at a medium rate.
6:24 pm - Intensity of the previous plume peaked at 9 and is now 8.75 and declining.
10:25 pm - We have had no discreet plumes after the previous one, however, we have had Biologics in the air for hours. Right now, intensity of the Biologic is 7.75 and steady. It has been at this intensity for hours.
10:47 pm - About 5 minutes ago we were hit with a Biologic plume. Intensity is at 8 and rising at a medium rate.
June 13
Overnight: After midnight, the air settled to intensity 8 and remained that way until some time after 3 am. By 4 am intensity dropped to 7.25 and remained there the remainder of the night (based on the times I was awake).
1:05 pm - At about 10 am we were hit with a very slow-rising plume of type Barium and Copper with the Inflammatory and Mercury additives. Air intensity rose slowly for hours and is currently at a horrible 8.75+. The Copper taste is obnoxious in the mouth and causes numerous symptoms. The Copper type is the dominant component.
The attack on all life continues.
3:33 pm - At about 3 pm, we were hit with a plume of type Barium with the Inflammatory and Mercury additives. Intensity is now 8.25.
11:21 pm - Spent the afternoon and evening in Bangor. In the early evening in Bangor, we were hit with a plume of type Model Cement with the Inflammatory and Mercury additives. Intensity was 8.25. After leaving Bangor, intensity dropped to 7.25. About 8 minutes from home, the intensity of the Inflammatory and Mercury additives increased to 7.75+.
Now, intensity is at 7.25+. We'll have to see how this night goes.
June 12
Overnight: Pretty heavy night of spraying. We had plumes at the following times. Note that these are similar to yesterday's times: ~2:45 am, ~4:45 am, ~7 am. Type was the Model Cement with Biologic, strong Inflammatory and Mercury additives. Intensity for each plume peaked between 8.25 and 8.75.
11:50 am - We were hit 5 minutes ago with a very strong, very fast-rising plume of type Model Cement with the Inflammatory and Mercury additives. Intensity of the air before the plume was 7.5 and steady. Intensity now is 8.5 and rising quickly. This plume will likely dissipate quickly because those that rise quickly usually dissipate quickly. Low altitude release maintain well-defined edges which make for fast rise and fall times.
The attack on all life continues.
12:55 pm - The previous plume peaked at intensity 9.5 and lasted about 45 minutes. We are now back to ambient levels of 7.25+.
7 pm - I was outside most of the day today and saw several non-persistent trails.
The entire day we had the Model Cement type with the Copper type and the Inflammatory and Mercury additives. I could taste the Copper additive throughout the day as it was dominant. Intensity was consistently between 8 and 8.75 throughout the day.
7:17 pm - We were just hit with a plume of type Model Cement and Copper with the Inflammatory and Mercury additives. Intensity is rising quickly and is already at 8.5. The Copper type is the dominant component. It tastes horrible!
I'm very glad I can smell and taste this in the air. I wish everyone could. In a way, I feel sorry for those who cannot. I am able to know why I'm feeling so badly and know exactly what chemtrail types do to those I'm around. I've documented all of that information in the link below.
9:06 pm - We were just hit with a plume of type Model Cement with the Inflammatory and Mercury additives. Intensity is rising quickly and is already at 8.25. The Inflammatory additive is the dominant component.
We had our nightly "break" from about 8:15 pm till 9 pm.
10:21 pm - About 10 minutes ago we were hit with a plume of type Model Cement and Copper with the Inflammatory and Mercury additives. Intensity is rising at a medium rate and is at 8. The Inflammatory additive is the dominant component. The Copper is strong as well.
11:40 pm - The previous plume was likely layered because the intensity continues to be high. Currently, intensity is 9.25. Plume intensity rarely lasts this long unless it is a multiple-release (layered) plume. The Copper type continues to be dominant.
June 11
Overnight: Horrible night of spraying here. We had plume at the following time through the night: ~3 am, ~5 am, 7:15 am, and 8:20 am. All of these plumes were of this type: Barium with Biologic, strong Inflammatory and Mercury additives. Intensity ranged from 8.5 to 9.25.
11:29 am - At 10:20 am we were hit with a plume of type Model Cement and Copper with the Inflammatory and Mercury additives. Intensity peaked at 8.75 and has now decreased to 8.5 and has been holding at that intensity ever since.
The attack against all life continues.
12:59 pm - I am just now detecting Biologics in the air. Intensity is 7.75+ and rising at a medium rate.
1:26 pm - I just detected the Sedative-Stimulant type in the air. Intensity is rising.
3:08 pm - Now that it's quiet here, I can hear the HAARP Hum. Also, the previous plume has died down so ambient levels are now 7.5+ with the Model Cement type with the oh-so-common Inflammatory and Mercury additives. The sky is covered with artificial clouds.
4:05 pm - At about 3:45 pm we were hit with a plume of type Sedative-Stimulant with the Inflammatory and Mercury additives. Intensity is 8 and is rising at a medium-slow rate.
7:32 pm - About 2 hours ago we were hit with a plume of type Model Cement with the Inflammatory and Mercury additives. We were hit again a few minutes ago with the same type. Intensity of these toxic chemicals in the air is currently 8.5. The Model Cement type is the dominant component although the Inflammatory additive is quite strong.
8:05 pm - The previous Model Cement type plume has increased and is currently at intensity 9.25. For sensitive people like me, it's like holding a tube of model cement below my nose. I wonder what this does to the liver and kidneys. Please wake up world.
9:58 pm - For the past hour we have had our nightly "break". Intensity has been 7 and steady.
I have watched the great bug die off. Using quadrant counting, I estimated 3000 near my front entrance on the wall with the light. This has been typical for years. So far this year, there is 200, perhaps 300. This is no surprise really. See the article below.
10:41 pm - I'm just now beginning to taste an incoming plume. Type is Biologics with the Inflammatory and Mercury additives. Intensity is rising medium-slow.
11:14 pm - I am now detecting the Model Cement type upon the previous plume. Intensity is rising quickly and is already 8.25+.
June 10
Overnight: Typical night with chemtrail fallout intensity between 7.5 and 7.75. At about 6:15 am we were hit with a very strong plume of type Model Cement with the Inflammatory and Mercury additives. Intensity of this plume peaked at about 9 and lasted for over 90 minutes.
10:41 am - Chemtrail fallout intensity is now at 7.75 and has remained at this intensity for the past hour. Type is Model Cement with the Inflammatory and Mercury additives.
11:56 pm - I have been outside most of the day. I saw several chemtrail jets releasing show, non-persistent plumes. The jets were flying at medium altitude and were very hard to see.
The intensity in the air all day have wavered between 7.5 and 8.5. There were a few plumes that hit us but they didn't last long, but that doesn't matter when the air is bad all day. The Inflammatory additive has been dominant all day. It's been months since they began using the Inflammatory throughout the day, and they haven't stopped. They are clearly wanting to hurt people, and there is not doubt that they are. The primary type all day has been the Barium type, and this is no surprise because we have had dozens of small, isolated storms come our way and nearly all of them just dissipated on radar before they hit us. This is what the Barium type does. I have watched the do this for years.
Tonight we had no break as we usually do. As I type this intensity is 8.5 with the Barium type and the Inflammatory and mercury additives. The Inflammatory additive is the dominant component as it has been all day.
There are no words to describe how it feels to have your life ruined by the most wicked people in history. There is one thing worse. A population that does not care.
Overnight: A record night. Last night between midnight and 3:30 am the air continued to increase in intensity slowly reaching a peak of 9.75. Type was the Drywall Dust type with the Inflammatory and Mercury additives. The Mercury additives was extremely dominant. The mercury in the air was so strong that I felt as bad as I did when I had all my amalgam dental fillings in my mouth. I had extreme mercury poisoning from my fillings and all those symptoms returned when this plume was in the air.
In fact, this is the reason that I initially concluded that chemtrails contain mercury back in 2005. From the very first chemtrail I experienced in 2005, I noticed that all those symptoms of mercury returned. 12 years later, Dr. Marvin Herndon published a paper revealing that chemtrails do indeed contain mercury. Also, throughout the 2000-teens, mainstream media continued publishing articles exposing the fact that mercury was being found all over the world for no known reason. Some of the articles attempted to blame it on Chinese power plants. Since studies have revealed that the gaussian distribution of mercury from power plants only travels 12 to 14 miles down prevailing wind, we know that Chinese power plants are not the source of this suddenly-appearing mercury around the world.
Regarding the intense Biologic that we were sprayed with yesterday, I said, "This will make people sick if it persists at this intensity." When you combine that with a very intense night of mercury (which is an immune suppressant), I was not surprised to find out that a relative was sent home from school today for being sick. This is real folks, and it's affecting people without most of their knowledge.
6:50 pm - I spent the morning at home and the afternoon in Ellsworth and later in Bangor. The air was not "horrible" in any location, but typical containing the usual type of Model Cement with the Inflammatory and Mercury additives. During my travels today I noted that the space between population centers was noticeably less intense than in Ellsworth and Bangor. Also, as usual, as I approached home intensity increased about 7 minutes away. I have chemtrails go directly over my house throughout the day every day (when it's not overcast and I can see them).
As I type this (6:54 pm) the air here contains the Model Cement type and the Inflammatory and Mercury additives at intensity 8.5. The Inflammatory is the dominant component.
9:57 pm - Since the previous entry, the air has been horrible. The Inflammatory additive has been dominant. Intensity has been between 8.5 and 9.25. It's been horrible. We've both been having numerous inflammation-related symptoms that are painful, debilitating, and completely illegal if done by any other entity than our government. Well, actually, it's still illegal, but what is anyone going to do about it?
From about 9:15 pm to just now, we've had our nightly "break". In the space of 15 minutes, intensity dropped down to 5.5 and it felt amazing. All of my inflammation vanished, and I have a lot. I went from walking like a 70-year-old sick man to being able to run up and down the stairs without any pain or shortness-of-breath. When the air clears of this intentionally-induced poison, it completely changes my life.
Well, just a few minutes ago the taste of the Barium type returned. Intensity is rising at a medium rate and is now at 7.5. The full profile is the Barium type with strong Inflammatory and Mercury additives.
It's sick and disgusting to poison people. One day soon, those participating in this epic crime against humanity will pay the ultimate price. Not one participant will be forgotten. The price that will be paid will be forever and the Judge will meet you sooner than you think.
Intensity is now back up to just below 8 and still rising. The pain and suffering has returned and I'm focusing on the future when this will all be over and justice will be done.
10:41 pm - Intensity of the previous plume is now up to 8.5 and still rising.
June 8
Overnight: Bad night of spraying. We had 2 horrible plumes at 1:15 am and then again at 3:15 am. Type was Model Cement with Inflammatory and Mercury additives. The Inflammatory additive component was the dominant component reaching an intensity of 9.25 on the first plume, and 9 on the second.
11:11 am - I woke up to biologic plumes in the air. The plume profile is Model Cement with Biologic, Inflammatory, and Mercury additives. As I type this the Biologic additive is the dominant component with an intensity of 9 (extreme). This will make people sick if it persists at this intensity. Intensity is rising at medium rate. They usually spray biologic on rainy days like today, so I'm not surprised at Biologics in in the air. I'm also not surprised at the horrific spraying of the Barium type yesterday. The Barium type is usually sprayed before incoming precipitation.
1:45 pm - Biologics are still in the air and have been between intensity 7.75 and 8.5 which is the current intensity. This is in addition to the other plumes components in the air which include the Model Cement type and the Inflammatory and Mercury additives.
As I said earlier, if they keep Biologics up at this level for 1 day or more, people will be getting sick.
2:41 pm - We just got hit with a plume of type Barium with the Biologic, Inflammatory and Mercury additives. Intensity is 8.5 and rising at a medium rate. The Inflammatory additive is the dominant component.
What to know why asthma is the new #1 disease among young people? I believe it's the Inflammatory additive. I have known those who have this disease and seen that it occurs in the presence of this plume type. I was not a bit surprised. The crimes being committed against the people are historic and unprecedented.
4:24 pm - We just got hit with a plume of type Barium with the Biologic, Inflammatory and Mercury additives. Intensity is 8.25 and rising at a medium rate. The Inflammatory additive is the dominant component.
10:43 pm - After the last plume, the air never completely cleared. It has the Barium type and the Copper along with the Inflammatory and Mercury additives. Up until about 9 pm the air continued with this mix at intensity 7.75 to 8.
From about 9 pm until now, we had our nightly "break" with intensity dropping down to 7.25. As I type this, it's just above 7.25. We'll see what happens tonight.
12:11 am - About 10 minutes ago we were hit with a plume of type Model Cement with the Inflammatory and Mercury additives. Intensity is rising quickly and is already at 8.5.
That attack against all life continues.
June 7
Overnight: Chemtrail fallout intensity was heavy through the night. Intensity was between 7.5 and 8 throughout the night. Type was Model Cement and Sedative-Stimulant with the Inflammatory and Mercury additives. The Inflammatory additive was the dominant component.
8:22 am - Current air conditions: Type is Model Cement and Sedative-Stimulant with the Inflammatory and Mercury additives. Current intensity is 8 and rising slowly. The Sedative-Stimulant type is the dominant component.
8:47 am - Current intensity of the previous plume (above) is 8.5 and still rising slowly. The Sedative-Stimulant type is still the dominant component, but the mercury additive is close in intensity. I'm experiencing strong mercury symptoms, and I am very familiar with such symptoms.
8:56 am - We were just hit with a plume of type Model Cement with the Inflammatory and Mercury additives. This plume is rising quickly.
The previous plume is still strong in the air and still rising. What does this tell us? The previous plume was likely released at a high altitude and because it continued for such a long period of time, it was likely a series of releases at high altitude offset by, perhaps, 10 or 20 minutes. This is what I call "layering" or "layered releases". This is likely the method they use to produce these very long, slow-rising plumes during the morning hours. If you look back over the log, you will see they have been producing these long-term, slow-rising plumes in the morning for quite a while now.
So in this case, the previous layered release caused the long-term, slow-rising plume of type Sedative-Stimulant (plus additives). Now, we are breathing a fast-rising plume of type Model-Cement (plus additives) which is a low-altitude release. So now we have a mixture of these two types in the air at the same time. This is producing the current air conditions. Here is a detailed snapshot of what I am now tasting and smelling in the air:
1. The Model-Cement type - Intensity 8.5 and rising at a medium rate. 2. The Sedative-Stimulant type - Intensity 8.75 and rising slowly. 3. The Inflammatory additive - Intensity 7.75 and rising slowly. 4. The Mercury additive - Intensity 8.75 and rising at a medium+ rate. Because BOTH the previous slow-rising plume and the current medium-rising plume both contain the mercury additive, I perceive this component to be rising at a faster rate.
This horrific mix is causing a cumulative intensity of 8.75.
This is happening my friends. Please self-educate about this (that what this entire website if for), then spread the truth about this massive crime against humanity which is, arguably, the largest and most damaging crime ever committed.
12:16 pm - I have seen 5 or 6 jets without even trying so far this morning. They are all coming from the Bay of Fundy and then fanning out. The center of the "fan" is directly over my house. They have been spraying the same type as earlier but have now added the Copper type which is very strong. As I type this, the Copper type alone has been at intensity 8.75.
See gsw.bz/log2206 - The jets I'm witnessing today have plumes spreading out to 5 to 10 times wider than their wingspan within a few seconds of being released. The wingspan of a 737, which is one of the most common jets we are witnessing producing trails, is 117 feet. If you multiply that by 5, it is 585 feet wide.
The graphic below shows the minimum width of a typical trail 5 seconds after being released as compared to a typical suburban neighborhood.
A 737 burns 1.85 gallons of fuel every mile or 1 gallon of fuel every 2854 feet which is 0.54 miles.
Under perfect theoretical conditions, which is called "ideal combustion", 1 gallon of jet fuel produces 1.23 gallons of water. Therefore, under such conditions, these jets are producing 1.23 gallons of water every 0.54 miles.
Jet combustion is far from ideal. Much of the hydrocarbons in jet fuel are converted to carbon soot. This produces the faint, black trail you see behind jets taking off at an airport. The lack of "ideal combustion" in a jet engine results in lower water production.
Nevertheless, assuming ideal combustion, the official government story is that 1.23 gallons of water are producing a largely-opaque plume hundreds of feet wide and 0.54 miles long.
Like so many official lies, when you run the numbers, the absurdity becomes blatantly obvious.
The official cover story used to deflect this absurdity is that most of the water in the plumes you see is already present in the air, yet any pilot or meterologist knows that humidity at these altitudes is very low and vastly insufficient to produce a visible plume.
Furthermore, even in high humidity conditions on the ground when a jet is taking off and producing the largest amount of water vapor per foot, such plumes simply do not appear. This is the time during the flight when jet engines burn the most fuel per distance (and create the most water vapor per distance) because they are having to provide the necessary power to lift and accelerate the entire aircraft.
The cover story for the lack of plumes seen at ground level is that plumes are not converted to ice crystals at ground level. However, when jets take off in very cold temperatures, such plumes are still not produced at ground level.
The claim that jet trails are a natural phenomenon of burning jet fuel requires a belief that 1.23 gallons of vaporized, frozen water can create a mostly-obaque plume larger than 8 typical city blocks (based on Chicago east-west city blocks). This is simply absurd.
2:42 pm - We have been hit with several plumes already this afternoon.
Right now we are breathing a plume of type Model Cement and Copper with Inflammatory and Mercury additives. Intensity is 9.25 and rising.
We are having numerous symptoms that ALWAYS accompany the poison they are releasing on us. It is absolute horrible.
Epilog - I spent most of the day in Bangor and the air was horrible half of the day. The plume type being used was the Model Cement and Copper types with the Inflammatory and Mercury additives. Intensity soared to 8.75. In the later afternoon air cleared up, but as I went home, it became worse so by the time I reached my house, intensity was back up to 8.75. This was a horrible day of spraying.
June 6
Overnight: We were hit with 3 major plumes during the night. Timing was evenly-spaced occurring at roughly 2:15 am, 4:15 am, and then 6:15 am. Each plume was of type Model Cement with very strong Inflammatory and Mercury additives.
9:54 am - Woke up this morning with very strong mercury symptoms. This happens every morning since chemtrails started, but some morning these symptoms are strong than other mornings. Nights light last night clearly had a lot of mercury in the plumes.
Remember, I began reporting the association between chemtrails and mercury symptoms over 7 years before the paper was published showing scientifically that chemtails do indeed contain mercury.
At about 8:20 am we were hit with a plume of type Sedative-Stimulant with the Inflammatory and Mercury additives. Intensity peaked at 8.5 and is now at 7.75 and falling slowly.
12:49 pm - The Sedative Stimulant type has been in the air for hours, actually since the previous plume at about 10 am. Intensity was 8.5 and has been slowly falling off to the current intensity of 8.
8:01 pm - I spent the afternoon in Bangor. The air was horrible the entire way and has been even until now. The chemtrail type in the air this afternoon was the Sedative-Stimulant type with extremely strong Inflammatory and Mercury additives. No matter where I was in the Bangor area, intensity ranged from 8.25 to 9.25. It was horrific for me.
About the time I was heading home at 5 pm -ish, Bangor was hit with the Model Cement type with extremely strong Inflammatory and Mercury additives. It was piercing, extremely inflammatory, and just pain horrific.
About 1/2 way home, intensity increased dramatically. When I arrived home, there was a massive swath of chemtrail plumes just above my house and just very-slightly north-eastward. This is the position they are always in when they are localized. They are not always localized, but localized events occur here at least a couple times on most days. Intensity of the Model Cement, Inflammatory, and Mercury was intense and piercing.
At roughly 7 pm we were hit with another plume of the same type: Model Cement with the Inflammatory and Mercury additives. This plume rose to intensity 9.5+.
It's now 8:11 as I type this. The previous plume has dissipated to intensity 8.25, which is still quite horrible. The dominant component all day, and even now, is the Inflammatory component. Our veins have been standing out of our arms all day. If I was on a treadmill sprinting or on a lifecycle "spinning" I would not be able to make my veins stick out like they do when they spray this type.
This is an intentional poisoning of the population and it's astonishing that so many do not care. Once again, there are simply no words to describe the absurdity and selfishness of the intentional blindness that many still prefer over truth.
10:23 pm - From about 9 pm to 10 pm we had our nightly break. Intensity dropped to 7.25 for about an hour.
Beginning at about 10 pm we were hit with another slow-rising plume. Type is Model Cement and Copper with Inflammatory and Mercury additives. Intensity is currently 7.75.
10:52 pm - The previous plume began rising in intensity more quickly and has now reached an intensity of 9 and is still rising.
Do you see how much worse the spraying has been?
The first hike in spraying happened at the end of 2019, then again around March of this year. I don't remember the exact month, but I could look back in these records and see the patterns. It may be super useful is someone took all these records and charted them in a visually-friendly way that may help us find more patterns. I only wish I had the time.
Intensity of the current plume is at 9.25 and may still be rising.
The nighmare that is chemtrails continues, day-after-day.
June 5
Overnight: Have you been watching this log to see how horrible the spraying has been for the past several days. Last night was no exception. Upon waking up at about 6 am, the air was already at about 8.75 intensity and it has not let up since them. The type of poison being used is the Barium type, the Sedative-Stimulant type, and strong Inflammatory and Mercury additives.
As I type this I am forced to wear a wet mask because, even though the skies are clear blue, the current air intensity is 9.75. This means the air is virtually unbreathable for sensitive people. It is nearly as bad as it can be. The moral of the story is that you absolutely cannot judge the condition of the air based on the presence of visible plumes in the sky.
I have watched them change chemtrails from long, persistent low-altitude plumes into small, non-persistent high-altitude plumes. This makes them much harder to see and makes them look far less threatening, but let me assure you, as someone who smells and tastes them in the air, there is no difference between them based on the the intensity at ground level. No difference folks.
I wrote an article about this so people will not continue to be deceived about it. Please read and share it below:
I have told you for years that spraying is always worse during large political events. What large political events do you see happening right now? Is it just some strange coincidence that spraying has suddenly become this bad at precisely the same time your bribed-and-paid-for politicians are trying to remove our ability to defend ourselves?
I hope you know the real reason they want you to be defenseless is so they can raid your homes without threat of retaliation, then haul you off to prison camps so you no longer have a voice to spread truth. They are doing this so they can install their horrific one-world government which will be the historic mother of bloody tyrannies. This is the real reason they want you defenseless.
They know that once people begin defending themselves against unlawfulness, the globalists' pawns will no longer be willing to immorally incarcerate truth-tellers and this will neuter the strength of the globalists. They are helpless without their pawns. This is the real reason are doing everything they can to remove your ability to self-defend.
Now that immoral, unconstitutional bills are up for vote, they want you to be quiet. They don't want protests or phone calls to representatives or any political pressure from moral, responsible Americans. So they spray you with metals and toxins that make you tired, apathetic, and unwilling to defend your right to protect yourself. This is why spraying is so much more intense when political events are happening. If you read my logs and articles from the past, you will see that this pattern is clear: Large political movements by globalists = very heavy public spraying.
Now - more than ever - is the time to stand up. Once your power is removed, you will never get it back again. Your country and any inkling of freedom you still have will be lost very shortly after. Your opinion will be silenced, censored, and if you voice an opinion that goes against the official lies, you will be imprisoned and worse, much worse.
Wake up and end the corruption. Do your part to stop corrupt politicians from committing these horrific acts against you.
12:38 pm - We're just now getting hit with a plume of type Barium and Copper with Inflammatory and Mercury additives. Intensity is rising quickly and is already at 8.25.
12:55 pm - The intensity of the previous plume is now up to 9.5. It seems to have peaked a couple minutes ago at 9.75.
4:14 pm - We're just now getting hit with a plume of type Barium and Copper (again) with Inflammatory and Mercury additives. Intensity is rising quickly and is now at 8.
9:58 pm - At about 7:20 pm and again at 9:20 pm we were hit with a plume of type Model Cement with the Inflammatory and Mercury additives. Intensity of the latter plume reached 9.25.
Between about 8:30 pm and 9:20 we had our nightly "break". Air intensity dropped to 7 for this brief time, and it was so nice to have most of my pain and inflammation go away for this little. How it wish the world knew what was being done to them.
11:02 pm - About 10 minutes ago we were hit with another plume of type Model Cement with very strong Inflammatory and Mercury additives. Intensity is already at 8.5 and rising at a medium rate.
12:27 am - About 5 minutes ago we were hit with yet another plume of type Model Cement with intense Inflammatory and Mercury additives. Intensity is at 8.5 and rising at a medium/fast rate. This plume is very similar to the previous plume about 90 minutes ago.
Yes, I know that some don't even seem to be affected by it. They have no painful inflammatory reactions. They have no asthmatic reactions. They seem to have no drop in energy.
June 4
Overnight: Slightly-less-than-typical night of spraying. Intensity was between 7.25 and 7.5 throughout the night. The Mercury additive was dominant after the last plume dissipated.
7:06 am - Overnight intensity continues at about 7.5. I expect it will rise slowly though the morning from high-altitude releases. The air currently continues the Model Cement type with Inflammatory and Mercury additives. The Mercury additive is still the dominant component at the time of this writing.
8:13 am - Since the previous post we have been hit with a very slow rising plume of type Model Cement with the Morgellon's, Inflammatory, and Mercury additives. They used the Morgellon's additive a couple days ago on the 1st of the month. Intensity is currently 8 and rising slowly. The Morgellon's additive is the very-dominant component.
12:42 pm - The air has been roughly at this state all morning. Type is the Model Cement and Copper with the Inflammatory and Mercury additives. Intensity has been wavering between 7.2 and 7.75.
1:18 pm - About 20 minutes ago we were hit with a plume of type Model Cement and Copper with the Inflammatory and Mercury additives. Intensity is now 8.5 and rising. The Copper type is the dominant component.
9:53 pm - Horrible day of spraying today. I spent the afternoon in Bangor. The air was horrible there too. The types present in the air were the Model Cement and Copper types with 3 additives: Biologics, Inflammatory, and Mercury. Intensity when we first got into Bangor was 8.75. On the way home tonight it went down to 7.5. Then when we were about 15 minutes from my house, intensity suddenly rose back up to 8.25 and remained there for about an hour. Throughout the day the Inflammatory additive was the dominant component.
From about 8:45 pm to 9:30 pm we had our nightly break where intensity dropped down to a mildish 7. It felt great. All my pains - and i have many - just vanishes. My energy shot up and it just felt great to have a break from the intentional poisoning.
At about 9:30 pm intensity rose at a medium rate to the present intensity of 9.25. Type is Model Cement with the Inflammatory and Mercury additives.
God help us. I am waiting for the day the intentional poisoning ends and the world wakes out of its deep sleep. Day after day we suffer waiting for the day.
June 3
Overnight: A typical night. Intensity through the night was 7.5 to 7.75.
9 am - Were were just hit with a plume of type Model Cement and Barium with the Inflammatory and Mercury additives. The inclusion of the Barium type means that precipitation is likely coming. I'll check radar. (A minute later) Yes, I just checked radar and we have a storm front that is going to be on us very soon. The Barium type is a very reliable indicator of incoming precipitation.
I occasionally mention this because it's important. Biologics are in the air every day. Usually they are in the background at an intensity of 4 to 5. I first detected this in February, 2009 in my area. It was mild but definitely present. These plumes were the first plumes I ever experienced having "soft" (diffused) edges. This indicated that they were released at high altitudes. I flew to Florida in May 2009 and confirmed that this biologic taste/odor was indeed in the air at 32,000+ feet, so yes, they clearly are releasing biologic plumes at high altitudes. Yes, they often release very strong biologic plumes at low altitudes as well, and I include these low-altitude biologic plumes in my daily log.
1:46 pm - At about 1:15 pm we were hit with a plume of type Barium and Copper with Inflammatory and Mercury additives. Intensity rose at a medium rate and is currently 9 and still rising.
4:47 pm - Well, it's almost 5 pm and the air has been at 8.5 for hours. The previous plume hit intensity 9 finally subsided.
Finally, air intensity dropped to an exhausting 8.5 and has been there ever since. The types in the air are the Model Cement, Barium, and Copper, so you can see why it's exhausting. This is a horrible mix.
9:03 pm - At about 8 pm, intensity began to drop slowly. The current intensity is 7.75 and consists of the Model Cement type with the Inflammatory and Mercury additives.
11:05 pm - We have had no break tonight. Air intensity increased to 8.5 by about 9:45 pm.
12:43 am - The air intensity is now 9.75 with the Model Cement and Copper types with the Inflammatory and Mercury additives. The Inflammatory additive is by far the dominant component. They are killing us here... It is so bad.
June 2
Overnight: Mildish night of spraying. Intensity was 7.25 throughout the night with 2 plumes that I know of.
The first plume was at roughly 2 am. The second was about 4 am. Type for both plumes was Model Cement with very strong Inflammatory and Mercury additives.
2:15 pm - We've had 2 plumes so far today. Type for both plumes was Model Cement with very strong Inflammatory and Mercury additives.
The second plume hit us at about 1:45 pm and is, as I type this, at intensity 8.75. It peaked at 9.25 about 5 minutes ago.
The attack on all life continues.
8:14 pm - We were hit with 2 plumes since the last entry.
The first hit us at roughly 5 pm. The second hit us at about 7:20 pm. Both were of type Model Cement with the Inflammatory and Mercury additives. Intensity peaked at 8.5 for both.
8:47 pm - About 10 minutes ago we got hit with a plume of type Model Cement with Biologics, strong Inflammatory, and Mercury additives. Intensity is currently 8+ and is rising at a medium rate.
9:24 pm - The intensity of the previous plume is now at 8.75 and still rising. The Model Cement type is the dominant component.
9:37 pm - The intensity of the previous plume is now at 9.25 and still rising. The air is absolutely horrible.
10:44 pm - The intensity of the previous plume dissipated about 30 minutes after the last entry.
We were just hit with a new plume of the same type (Model Cement type with Inflammatory and Mercury additives). It's rising more slowly. This is likely a plume that was dropped upwind. Have you seen the jets flying in parallel about a mile apart? I see them here all the time. As the plume travels horizontally along the ground, it dissipated and the edges "soften". This results in successive plumes that have a lower peak intensity and slower intensity rise time.
This is the single largest crime against humanity in human history. I believe, one day, we will all know that millions have been killed before their natural time because of the intentional mass-poisoning of the entire Earth.
11:10 pm - The plume that hit us at 10:44 pm is now at intensity 9 and still rising. Folks, this is absolutely horrible. I can only imagine how many lives that have been lost as a result of the intentional poisons they are spraying on us. In case you don't know, all the governments of the world cooperate intimately in doing terrorizing things.
June 1
Overnight: We had 3 prominent plumes last night. All were of type Model Cement with strong Inflammatory and Mercury additives. All also had strong mercury. Did you know mercury exposure induces urination? This can lead to frequent urination during the night.
10:14 am - This is a switch for the new month. About 90 minutes ago we were hit with a very slow rising plume of type Model Cement with the Morgellon's, Inflammatory, and Mercury additives. We have not had the Morgellon's additive since May 5th (early last month), but today it's back with a vengeance. Suddenly feel itchy on your skin? This may be why. Intensity of this plume has risen very slowly over the past 90 minutes and is now at 8.5 and still rising.
9:44 pm - I spent the day in Portland all afternoon and into the evening.
In the afternoon intensity was 7.5 and remained there for some time.
At just after 5 pm they hit Portland with a very strong Model Cement type with Inflammatory and Mercury additives. This is the same time they hit Portland virtually every time I am there.
Driving north we eventually drove out of the heavy fallout just north of Cumberland which is about 15 minutes north of Portland. Intensity was about 7.5 during this part of the trip.
The air remained at roughly this level until we approached Bangor. About 5 minutes outside Bangor plume fallout intensity increased to 7.75. Then as I approached him, intensity increased to 9. The air was intense with the acetone-like taste of the Model Cement chemtrail type. The air was very intense with the Inflammatory and Mercury additives.
At about 9:15 intensity began to drop to the current level of 7.25 with the same type. I suspect we are now in the nightly "break" that I often mention.
So, what have I learned about these trips to Portland? Bottom line is this: They usually spray heavily populated areas harder. Not always, but usually. Of course, it's all about timing. I cannot monitor the entire path home at the same time, but statistically, it's clear that populated areas are targeted.
I have found that the stretch between Waterville and Bangor is usually the mildest stretch between Portland and Bangor along interstate 95.
10:40 pm - There is now another Model Cement type in the air with Inflammatory and Mercury additives. Intensity is rising at a medium rate and is currently 8.
11:10 pm - The intensity of the previous plume now nearing 9.75.
Last edited by Russ Tanner; 10/07/2206:06 PM.
Russ Tanner, Founder, Administrator, Programmer GlobalSkywatch.com My Chemtrail Story
![[Linked Image]](http://globalskywatch.com/chemtrails/ubbthreads.php?ubb=download&Number=17890&filename=2022-06-23_10-24-38%20radar.png)
![[Linked Image]](http://globalskywatch.com/chemtrails/ubbthreads.php?ubb=download&Number=17891&filename=2022-06-23_20-48-04.png)
![[Linked Image]](http://globalskywatch.com/chemtrails/ubbthreads.php?ubb=download&Number=17889&filename=chemtrail-width.png)