Daily Log of Chemtrails Spray Events: Log #13: January 2022
January 31
Overnight: Stronger-than-usual spraying through the night with biologics. Intensity through the night was 7.75+ and included biologics.
Again, this is no surprise because biologics are typically sprayed after weather events that the public associates with "colds and flu".
The type through the night was the usual Model Cement type with the Inflammatory and Mercury additives plus Biologic additive. Did you wake up feeling that you immune system was stressed? Now you know why.
7:44 am - The intensity level is being maintained even now at 7.75+ with the Model Cement type with the Inflammatory, Mercury, and Biologic additives.
9:27 am - Intensity is now increasing quickly, so clearly we've been hit with a new plume. Type is Barium with the Inflammatory and Mercury additives. Intensity is now 8.75 and rising.
10:09 am - The previous Barium type plume is now decreasing in intensity. It peaked at 8.75 at about 10 am. It's now at 8.5.
2:46 pm - We were hit with a couple plume but I didn't record the times. The last one hit us about 2 pm. It was a Model Cement type plume with the Inflammatory and Mercury additives. Intensity peaked at about 8.75 (very strong).
The attack on all life continues.
5:09 pm - Just now getting hit with another plume of type Model Cement with the Inflammatory and Mercury additives.
Please check and share this list of real news sources. Sharing the truth will save lives: https://gsw.bz/ovnews
8:43 pm - Just hit with another plume. Type is Model Cement with the Inflammatory and Mercury additives. Intensity has risen quickly. In the past few minutes intensity has risen to 8.5 and is still rising.
We were hit with another plume at roughly 7 pm (I didn't record the time). This was another Model Cement plume but it passed quickly indicating that it was mostly blown past us by the time it reached ground level.
The HAARP Hum has been very loud all day.
9:58 pm - We were just hit with another plume of type Model Cement with the Inflammatory and Mercury additives. Intensity is rising quickly and is currently at 8.25.
10:40 pm - About 30 minutes ago we were hit with another plume of type Model Cement with the Inflammatory and Mercury additives. The Inflammatory additive was very powerful, as is the case nearly every night. Intensity hit 9.5.
Also, the HAARP Hum is extremely loud tonight, as loud as I've ever heard it. It's as if I have my ear against a humming transformer.
God help us though this night. May God visit those who torment His people with their nearly silent weapons.
January 30
Overnight: Model Cement type with Inflammatory and Mercury additives. I woke up with artifacts of Biologic spraying, so I believe we were hit with this type during the night, but I was not awake during the event itself.
9:38 am - I first detected a plume of type Model Cement with the Blunt Metallic type mixed in along with the - all too common - Inflammatory and Mercury additives at 9:27 am. Intensity is now (9:39 am) 7.75+ and rising slowly. Because intensity is rising slowly, we can determine this plume was released at a high altitude.
Getting back to the Biologics released earlier: This should surprise no one when you consider the historic pattern of the spraying. In short, they almost always use biologics during and/or after storms or severe weather so people will blame their resulting illness on the weather. This is a very important point to remember.
And now that the blizzard has passed by, here is a very important video to watch that will be very enlightening to those who have not yet seen it.
10:27 pm - Now that the previous plume has decreased in intensity, I am able to detect that latent biologics are in the air. Intensity is 7, but this is still significant considering what I have seen historically.
11:27 pm - Just hit with another plume of type Model Cement with the Inflammatory and Mercury additives. Intensity is rising quickly.
11:41 pm - One final entry tonight... I hope. The intensity of the previous plume is now 8.5. Also, the HAARP Hum is very loud tonight. I'm not sure I mentioned it, but yesterday it was loud as well.
Goodnight and thank you for visiting. Hopefully you can share this log with others so they can see what is being done to them.
January 29
Overnight: Average night with no discrete plumes. Intensity was 7.5- throughout the night.
11:04 am - First plume of the day. We are in a blizzard right now, but high winds and bad weather do not stop chemtrail spraying. The type hitting us right now is the Model Cement type with the Inflammatory and Mercury additives. Intensity is at 8 and rising.
The attack against all life continues.
Please take a moment to watch this video to learn just how enormous is the scope of the deception upon the world. This page has detailed information about the coming deception:
12 noon (roughly) - We were hit with another plume, even amidst strong winds. The air intensity is currently at 8.25 with the Model Cement type with the Inflammatory and Mercury additives.
The attack against all life continues, even during blizzards.
12:47 pm - The intensity of the previous plums is now at 9.
4:04 pm - At 2:08 we were hit with a Model Cement type plume that peaked at intensity 9, despite the blizzard outside. Remember folks, all the air outside eventually becomes the air inside. At 4:02 pm we were hit with a plume of type Model Cement with Blunt Metallic with the Biologic, Inflammatory, and Mercury additives. I'm not making this up folks. I'm just reporting what I smell and taste in the air for the benefit and future reference of those who find this information useful.
5:45 pm - Despite having very strong winds outside, we were just hit with another plume of type Mode Cement with the Inflammatory and Mercury additives. Likely because of the winds. it came on very quickly and will likely pass quickly as well. We'll have to see.
8:34 pm - Just got hit with a Model Cement type plume with the Inflammatory and Mercury additives. it's not intense, and that may be because of the wind outside. Intensity increased from 7.5- to 7.75+. As I type this, it doesn't seem to be increasing in intensity.
9:36 pm - We were hit with the Model Cement type with the Inflammatory and Mercury additives about 5 minutes ago. The plume is rising quickly and is currently at intensity 8.25. The previous plume did not grow in intensity but slowly dissipated.
It's now 9:38 and the plume is already at 8.5 and still rising.
It's now 9:44 and the plume has risen to 8.75 and still rising.
10:11 pm - About 10 minutes ago, the previous plume peaked at intensity 9.5. It's now 10:12 pm and intensity is declining slowly.
12:44 am - About 20 minutes ago we were hit with another plume of type Model Cement type with the Inflammatory and Mercury additives. Intensity is now 8.75 and seems to have peaked.
The attack against all life continues. God help us.
12:50 am - Well, the previous plume had not peaked as I thought. It's now at intensity 9 and still rising. There are no words to express the death and disease globalists have caused in the people. One day it will all be known. That day cannot come soon enough.
12:53 am - Well, the previous peaked at 9.5 and is now subsiding. The wind is really making intensity fluctuate quickly.
The historic crimes against humanity continue. Soon we'll be at war. When the globalists lose their influence on the population, they play the war card.
January 28
Just for the record, I have no health symptoms except when chemtrails are present... NONE! I believe this is true of many, many, many people, but they don't know because they cannot smell or taste them in the air.
Overnight: They poisoned us like the true terrorists they are last night. The spraying was devastating over us. Here's the schedule:
- 1:15 am - Intensity peaked at 9.5 - Type: Model Cement with extreme Inflammatory and Mercury additives.
- 4:30 am - Intensity peaked at 8.75 Type: Drywall Dust and Blunt Metallic type with extreme Inflammatory and Mercury additives.
- 7:15 am - Intensity peaked at 8.25 Type: Model Cement with very strong Inflammatory and Mercury additives.
- 9:19 am - Another plume of type Model Cement type and the Blunt Metallic type with Inflammatory and Mercury additives. This peaked at intensity 8.5.
The types through the night were very drying as I woke up with a stone-dry mouth, which never happens without chemtrails of the drying types. Once again, this makes sense considering we have a rare blizzard headed for us right now.
It's now 10:17 and the air is still carrying the Model Cement type with the Drywall Dust type and the Blunt Metallic type with Inflammatory and Mercury additives at intensity 8.25. It's not letting up.
May God visit each and every one who is destroying the world:
Quote
"And the nations were angry, and thy wrath is come, and the time of the dead, that they should be judged, and that thou shouldest give reward unto thy servants the prophets, and to the saints, and them that fear thy name, small and great; and shouldest destroy them which destroy the earth." -Revelation 11:18
Remember folks, you don't destroy the world with bows and arrows. This is a Biblical reference to modern technology.
Technologies Anticipated
The Fontiers of Science
6 pm - Air has been at intensity 7.5 nearly all day, until now. We were just hit with a plume of type Barium with string Inflammatory and Mercury additives. Intensity is 8 and rising at a medium rate.
7:20 pm - 10 minutes ago we were hit with another plume of type Model Cement with strong Inflammatory and Mercury additives. Intensity is rising rapidly and is currently at 8.5. So this is the usual evening inundation with the extreme Inflammatory additive. Never ceases to be amazing that they are still getting away with this.
8:25 pm - The previous plume has continued to increase to the current intensity of 9. The Inflammatory component is extreme right now.
The largest crime against humanity continues.
11:30 pm - Just hit 3 minutes ago with another plume of type Barium with the Inflammatory and Mercury additives. Intensity is currently at 8 and rising.
12:10 am - I forgot to mention that the HAARP Hum has been loud all day today.
Goodnight.
January 27
Overnight: Stronger than usual night of spraying. Type mix was Model Cement and Blunt Metallic with the Inflammatory and Mercury additives. The Inflammatory additive was exceptionally strong through the middle of the night. Intensity was 7.75+ and was back slightly to 7.75- by 8 am.
Air this morning from 8 am until now contained the Model Cement type with the Inflammatory and Mercury additives. Intensity has been 7.75 to 8 all morning. This is also stronger than usual.
At about 11:35 am we were hit with a plume of the same type (Model Cement with the Inflammatory and Mercury additives). It is now 11:45 am and intensity is 8.75 and still rising. The sky is clear blue with no visible persistent trails, so don't be fooled by clear skies. I have been sharing for years that this no longer means anything. Remember just a few years ago when the skies looked like a war zone everywhere? Now, in many area, including ours, chemtrails are only clearly visible 10 days +/- a month.
8:07pm - The early afternoon was horrible. We had a couple plumes of type Model Cement with the Inflammatory and Mercury additives. They were both very intense. The second one peaked at 9.5. The first one peaked about 8.75.
The late afternoon was strangely mild, but it may be because we have a huge blizzard headed our way and their assets may be tied up working on that.
Interesting is the timing of this blizzard with the truckers historic protest.
Intensity ranged between 7 to 7.25, so it was a nice break from their historic attack against all life.
It's now 8:10 pm and we just got hit with a plume of type Model Cement with very strong Mercury additive. Fortunately, this plume passed by quickly. Clearly we were only hit by the edge of it. Intensity is now 7.5 and decreasing.
8:47 pm - We were just hit with another plume of type Model Cement with very strong Inflammatory and Mercury additives. If you've read this log for any time, you know that this is no surprise because they do this every night, namely, they hit us hard with very strong Inflammatory additive. Intensity right now is 8.5 and rising fairly quickly.
9:35 pm -The previous plume is now at 9.75+ and still rising.
10:06 pm - The previous plume finally dissipated in the past few minutes and is now back to 8 intensity. This is horrific and intense.
January 26
Overnight: Intensity was 7.75 all night with the Model Cement and Blunt Metallic types and the Inflammatory and Mercury additives.
We were hit this morning with a very slow rising plume of type Model Cement and Blunt Metallic with the Inflammatory and Mercury additives. I first detected it at 6 am and it continued to rise in intensity very slowly until peaking at just after 10 am at 8.5.
We had another plume but I didn't record the time. It was pretty strong and required me to wear my wet mask.
I spent most of the day in Bangor (ME) where the air was between 7.25 and 7.5 until 5 pm, at which time we were hit with a plume of type Model Cement with the Inflammatory and Mercury additives. This passed quickly.
At just after 7 pm I was at Shaws near downtown and we were hit with a plume of type Model Cement and Blunt Metallic with the Inflammatory and Mercury additives. This plume had a very powerful Inflammatory additive. It rose quickly in intensity to 8.75.
After this I drove home and the air reduced in intensity to 8 about 3/4 of the way home.
At less than 10 minutes from my house, intensity rose quickly to 9.5 with the Inflammatory component being extremely strong. My veins are standing out of my arms from the inflammation induced by this poison. This plume dissipated to the current level of 8.5 which is the current intensity level. The time is now 9:05 pm.
The Inflammatory component does not make everyone have a dramatic inflammatory reaction. In most people the reaction is more subtle inducing tiredness. I have seen countless occasions when we were hit with this additive and within minutes, everyone I was with was suddenly tired, sleepy, and ready to go home and go to bed. This is the typical reaction.
10:05 pm - Just after the previous entry, we were hit with another plume. Type was Model Cement with the Sharp-Metallic type with extremely strong Inflammatory and Mercury additives. Over a period of an hour the plume peaked at 9.75. The Inflammatory additive was dominant again and strong enough to cause our veins to stand out of our arms. It was odd to experience the Aluminum type again. It's been a long time. This is the second plume type that has been used lately that has not been used for a long time before.
As hard as it is to believe this is happening, folks, it is happening, and it's happening during our lifetime. The question is: What are we going to do about this horrific crime against humanity?
We have a strong storm coming in so I'm expecting some potentially heavy spraying over the next 24 hours.
January 25
Overnight. The air was filled with the Barium type with Inflammatory and Mercury additives at intensity 7.5+ throughout the night.
12:28 pm - Just after 6 am I detected a gradual rise in the intensity of the Barium type. The plume also contained the Morgellon's additive along with the Inflammatory and Mercury additives. This plume gradually increased in intensity linearly until 10:30 am when it reached an intensity of 9. This slow, linear rise indicates a high altitude release. I did not know snow was expected today, but the fact that they were spraying the Barium type let me know before I ever looked out the window.
Remember, the Barium type is almost always associated with approaching precipitation (rain or snow). Even though the rain/snow often does not reach us, we you can see them hypernucleating incoming fronts which causes them to simply dissolve with in hour or 2. It's quite a sight to see, and it looks as unnatural as it sounds. Watch radar when rain or snow is incoming. If you see a sudden dissipation of the front, in your location or slightly before, check if you are having any unusual symptoms or inflammation.
I forgot to mention that the HAARP Hum was loud both yesterday morning and this morning.
At 12 noon, I first detected a plume of type Model Cement with the Inflammatory and Mercury additives. This plume has increased gradually and is currently at intensity 9.
I hope you consider sharing this log with everyone you know. The URL is at the top of this post.
Remdesivir Study Stopped: Killed 54% In Study: Fauci Knew
10:02 pm - The entire afternoon was filled with horrible air. The plume at noon never subsided and the intensity through the entire afternoon remained between 8 and 8.75. The type was Barium and Blunt Metallic with the Inflammatory and Mercury additives. The intensity did not decline until roughly 7 pm. From that time until now the intensity has remained just above 7.25. It was a nice break from a day of horrific poisoning.
Now (10:29 pm) a plume is hitting us. Type is Model Cement with the Inflammatory and Mercury additives. In just the past couple minutes intensity has risen to 8 and is still rising quickly.
Please share this information about the largest crime against humanity ever committed. Simply because people don't smell and taste it, they don't associate their health issues with the spraying. Those who I have had contact with who do smell and taste it quickly discovered that their health issues, and the health issues of those around us, are induced by the intentional poison in the air. Convincing people who don't smell and taste it is almost impossible. It is a sad and devastating situation. If people only knew how profoundly the poisoning affects them, the political climate would have change many years ago.
In case I don't make another entry tonight, I hope you have a good night, and I hope you are on the right side of history. You were born into this time in history for a reason. It's up to you whether or not you will fulfill it. I hope you do.
January 24
Overnight: Not good, but you will see a pattern here. The first part of the night was mildish with intensity between 7.25 to 7.5.
At 7:37 am, we were hit with a plume of type Blunt Metallic and type Drywall Dust with very strong Inflammatory and Mercury additives.
This same combination of plumes hit us again at 8:40 am, and then again at 9:45 pm.
I was on the road on my way to Freeport, (just north of Portland) by 11:40 am. Most of the way down, which is about 2 1/2 hours, the air was about 7.25, mild compared to recent intensity levels.
By the time we arrived, 1:45 pm, the air we just above 7.25.
By 3:30 pm intensity rose to 7.5+.
At 5:30 pm intensity rose to 7.75, and we left Freeport for home.
As we drove north and passed through Augusta, intensity rose to 8 and continued for a while.
By the time I was 20 minutes from home, intensity rose to 8.5. Again, if you've been reading this log for long, you know that this intensity nearly always increases as you approach my house.
Intensity decreased slightly to 7.75 and 8 for the following few hours.
It's now 10:02 pm and intensity is between 7.75 and 8. The type is the same as it has been all day. This is a dramatic change because, for a long time, the predominant type has been the Model Cement type. The Blunt Metallic type has, until recently, not been used for a long time. It is a horrible type that causes horrible symptoms in some people, often related to heart and lung inflammation. Others seem to be unaffected.
Globalists use "pollution" as justification for global government, yet they are the chief polluters. This is true of all the of the major issues in the world today. They cause the problems and then profit from the so-called solutions they offer. Their proposed solutions profit no one but the globalists themselves. They use the problems they cause to convince public that they need global government to solve problems. What we really need is to purge corruption. If we did, we would be free of 95% of global issues.
Overnight: The pattern seen for the past few days is repeating itself. The first half of the night is "normal" with ambient levels between 7.5 and 7.75. However, from 4 am onward, we had very strong plume about every 2 hours. The type and mix was the same as yesterday:
Drywall Dust mixed with Blunt Metallic type with very strong Inflammatory and Mercury additives.
At first light, the sky was visibly covered with a layer of chemtrail fallout for as far as the eye could see.
From 4 am this morning until now, we have been hit roughly every 2 hours with this horrific and very inflammatory mix. We were just hit again (1:39 pm) and the air is currently at 9.25. Incidentally, this is the first one of the day that included the Model Cement type.
This mix seems to starve the heart and lungs of oxygen and causes horrible inflammation which could harm those who are older or more sensitive to inflammation. If they have been spraying this type in Bangor for the past 48 hours, I bet the hospitals have had their share of heart and respiratory issues. If you have any personal knowledge of this, please contact me.
Here is more information on the types of toxic poison being intentionally sprayed on us:
10:31 pm - Spend the day in Bangor (ME). I left home at about 2 pm and the air was horrendous at intensity 9.5. Type was a combination of Drywall Dust mixed with Blunt Metallic type with very strong Inflammatory and Mercury additives. Just 10 minutes up the road intensity dropped to 7.75. By the time I came into Bangor intensity was down to 7.5.
Throughout the day intensity wavered between 7.25 and 7.5. As I drove home intensity slowly increased over a gradual gradient. As I approached home about 10 minutes away, intensity suddenly rose to 8.25-. I have mentioned this many times previously. It is a pattern that I wish never happened.
Currently, intensity has decreased to 7.5. Let's hope it stays this way.
Have a good and safe night.
January 22
Overnight: Generally mildish night, until 6 am when we were hit with a combination plume of type Model Cement and Drywall Dust with the following additives: Inflammatory, Mercury, and Morgellons.
Yes, the Morgellons additives. We had this additive hit us a few weeks ago.
We have had a few plumes since, but the next one I recorded was at 11 am were we were hit with the Model Cement and Drywall Dust with the Inflammatory and Mercury additives. Intensity rose to 8.75+.
Now (1:01 pm) we are under a plume of the same type again. Intensity peaked at 8.5 about 30 minutes ago.
5:50 pm - The air has been bad all day. Intensity has been between 7.75 and 8.75 with several plume. Plume types have been Model Cement with Blunt Metallic types mixed, a nasty combination. Right now intensity is 7.75 and steady.
The remainder of this evening we had several plume of type Drywall Dust mixed with Blunt Metallic with very strong Inflammatory and Mercury additives. This is a potent and dangerous combination that, I'm sure, have put some people in hospital, or worse.
The spraying of this mixture continued until after midnight.
January 21
Overnight: We had the Barium and Model Cement types with the Inflammatory and Mercury additives. Mercury symptoms we unusually strong this morning.
10:48 am - This is our first strong plume of the day. Type is Model Cement with the Inflammatory and Mercury additives. Intensity is now 8.75.
6:27 pm - I have not tracked every plume today, but there has been several throughout the day. Most notable is the Biologic plumes that have been in the air for the majority of the afternoon. Intensity of these plumes ranged from 7.75 to 8.75.
The crime being committed against humanity are historic and unequalled except in the matter of chemical aerosol injection ("chemtrails"). What will it take for every person to become actively involved in ending these enormous crimes against humanity.
11:30 pm - We were hit about 15 minutes ago with a plume of type Model Cement with very strong Inflammatory and Mercury additives. This plume is rising at a medium rate and being that there is no wind, it may be on us for a while.
Before this plume we had hours with no discreet plumes, only ambient levels between intensity 7.25 and 7.5 with a mix of types including Model Cement, Biologics, with mild Inflammatory and Mercury additives. It was a nice "break" from the intentional poisoning that we normally experience through the evening.
Good night. May we have clean air tonight.
January 20
Overnight: Intensity level ranged between 7.25 and 7.5.
10:29 am - We've had 4 hits already this morning.
First and second at 6:01 am and 8:07 am. Both were of type Biologic with Inflammatory and Mercury additives. They peaked at intensity 8.5 and 8.75 respectively.
The second and third plumes fell on us at 9:01 am and 10:24 am. Type was Model Cement with Inflammatory and Mercury additives. The first plume intensity peaked at 8.5 and the current plume is currently at 8.25 and still rising.
This is not a good way to start the day. Inflammation kills and chronic inflammation is deadly.
2:58 pm - The air has never cleared this afternoon. For hours, there has been the Barium type in the air with the Inflammatory, Mercury, and Biologic additives. It has remained in the range of 7.75 and 8.75 without any decline to recent "ambient" levels of 7.25 to 7.5. At this time (3 pm), it is at 8.5.
3:19 pm - It doesn't take long to change. Intensity is now at 8.75. Still the Barium type with all the additives names above, including Biologic.
5:17 pm - We just got hit with a plume of type Model Cement with the Inflammatory and Mercury additives. The Barium type is still in the air and this new plume is being layered on top of it.
5:57 pm - The previous plume passed quickly so we clearly only caught the "corner" of the falling plume. Just now we were hit with another Biologic plume. Intensity is increasing rapidly and is now (5:58 pm) at 8.
9:36 pm - Biologics have been in the air continuously. Intensity has been between 7.75 and 8.75. They have been using the TYPE II biologics which induce flu-like symptoms. There has been a lot of mercury in the mix as well. This happens often with biologics, probably because mercury is a powerful immune suppressant.
11:14 pm - We were hit with a plume of type Model Cement with the Inflammatory and Mercury additives a few minutes ago. Intensity is 8.5 and rising. The Inflammatory component is especially strong, as is usually the case during our 5 pm to midnight hits. May God have mercury on us all.
January 19
Overnight: Typical night with intensity about 7.5 throughout the night. Type was Model Cement and Barium with the Inflammatory and Mercury additives.
11:38 am - We were hit with a plume of type Barium at roughly 10:45 am. Intensity is now 8.
Check this link for the latest alternative news: OV News
11:51 am - I just looked outside and discovered it is snowing, which I did not know. Why is this significant? I have said for years that that Barium type is typically sprayed before and during precipitation; both rain and snow, and considered they have been spraying the Barium type, this - once again - make sense and follows the pattern.
4:19 pm - At roughly 2:20 pm we were hit with another Barium type plume. At about 4:10 pm we were hit with a Model Cement type plume. Intensity is now8.25 and rising.
10:46 pm - We had a couple weak plumes this afternoon of type Barium. I did not record the times. Just now we got hit with Model Cement plume with fairly strong Inflammatory and Mercury additives. Intensity is rising.
January 18
Overnight: Typical night with intensity about 7.5 throughout the night. Type was Model Cement and Barium with the Inflammatory and Mercury additives. I keep telling you about the Mercury additives because we have mercury symptoms that are always associated with this particular metallic taste in the air. I know mercury symptoms well.
~11:30 am (roughly - I didn't mark the exact time) - Model Cement plume with Inflammatory and Mercury additives. Peaked at intensity 8.
1:22 pm - Just hit with a very strong, very fast-rising plume of type Model Cement. It's now 1:24 pm and intensity has already risen to 9.25. This is one of the fastest-rising plumes I've experienced in a long time. This is likely a low-altitude release. This plume will likely pass quickly. The short principle is this: If they rise quickly, they fall quickly. It's now 1:26 pm and intensity is 9.5 and still rising. Unbelievable. Every have sudden headaches or nausea or vertigo or fatigue that hit for no apparent reason? There is a reason for everything, and I believe this is usually it.
7:36 pm - We've had a couple plumes this afternoon but I have not marked the times. They were type Model Cement with Inflammatory and Mercury additives and were spaced roughly 2 hours apart. The one that hit us a couple hours ago rose to intensity 9.5 (extremely intense). A few minutes ago we were hit with a Barium type plume with the Inflammatory and Mercury additives. Intensity is rising slowly and is currently 8.25+.
9:21 pm - We were hit with a Model Cement type plume with the Inflammatory and Mercury additives a couple minutes ago. Intensity is increasing rapidly and is already at 8.5.
11:59 pm - We were hit with a very strong plume of type Model Cement with very intense Inflammatory and Mercury additives at about 11:30 pm. Intensity rose to 9.75 at about 11:50 pm and is now declining slowly.
January 17
Overnight: Had Model Cement and Barium type plumes in the air between 7.5 and 7.5 (above normal) intensity. Not atypical considering that a snow-front just moved in and we are getting heavily dumped on with snow.
12:26 pm - We were hit with a plume of type Mode Cement with the Inflammatory and Mercury additives at about 11:45 am. Intensite peaked at 8.75 at about 12:05 pm. Intensity is now 7.75. It is very windy outside so this likely accounts for the shorter duration of the plumes. I have noticed this pattern throughout the years.
1:01 pm - We were hit with a plume of type Model Cement with the Inflammatory and Mercury additives. It peaked at 8.5. Again, it dissipated quickly likely because it's windy outside. It's now 1:20 pm and intensity is already back down to 7.75.
3:47 pm - We just got hit with a plume of type Phosgene.
4:54 pm - We were hit with a plume of type Model Cement with the Inflammatory and Mercury additives.
10:06 pm - We were just hit with a plume of type Barium with the Inflammatory and Mercury additives. Between 5 and 10 there was a lot of wind so we had a plume that hit us but didn't last long. I was very busy so I didn't log it.
10:26 pm - Intensity is now up to 9 and still rising. Now that the wind has died down, we are experiencing the usual intense Inflammatory plumes that we have nearly every night between about 5 pm and midnight. It's surreal to be poisoned while much of the public keeps believing the coordinated lies of mainstream media.
January 16
Overnight: Type overnight was the typical Model Cement type with the Inflammatory and Mercury additives. Intensity was a fairly steady 7.5 based on the times I was awake. I woke up with artifacts of biologics and even now sense some in the air.
9:58 am - It's now almost 10 am and there is a slow-rising Model Cement type plume in the air. This is a very common pattern in the mornings. Intensity is currently 7.75 and rising. I'm also sensing biologics in the air.
Now keep in mind, that since 2009, there have been biologics in the air in my area. This is a low-level, continuous onslaught that never goes away. The air has never been free of biologics since 2009, but their presence is often eclipsed by the powerful plumes that hit us throughout the day.
Incidentally, in the mid 2010's, a series of articles came out in mainstream media saying, "Billions of viruses are falling from the sky". See this article: RT Reports: Viruses Just Falling From the Sky
10:58 am - The previous plume peaked at intensity 7.75+. We were just hit with a new plume of type Model Cement with the Inflammatory and Mercury additives. Intensity is rising quickly and is now (11 m) at 8.5.
How much pain and suffering must the world endure until they wake up? Sadly, too much. Please be actively involved in exposing this historic crime against humanity daily.
1:29 pm - We were just hit with a plume of type Model Cement with the Inflammatory and Mercury additives. The Inflammatory and Mercury additives are almost always less intense with daytime plumes and much more intense after 5 pm. This plume is rising quickly and is now (1:30 pm) at 8.5.
4:15 pm - We were just hit with a plume of type Model Cement with the Inflammatory and Mercury additives.
6:44 pm - We were just hit with a plume of type Model Cement with the Inflammatory and Mercury additives (again).
9:44 pm - Yes, exactly 3 hours later... We were just hit with a plume of type Model Cement with the Inflammatory and Mercury additives (yet again).
10:04 pm - The past few plumes didn't get too strong peaking at or below 8.25, but this last plume is now at 9 already and still rising. Laura is feeling the pain and inflammation as well. Globalists are "thinning the herd". This is how they view humans, as insects.
11:14 pm - We were just hit with a plume of type Barium with the Inflammatory and Mercury additives. This makes sense because we have a storm headed this way, and this type of plume is nearly always sprayed before precipitation, either rain or snow.
12:51 am - We were just hit with a plume of type Model Cement with the Inflammatory and Mercury additives.
2:05 pm - We were just hit another plume of type Model Cement with the Inflammatory and Mercury additives.
January 15
Overnight: A much-worse-than-usual night of spraying. Intensity through the night was between 7.75 and 8.5. Type was Model Cement with very strong Inflammatory and Mercury additives.
1:45 pm - We've had several plumes already this morning.
I woke up just after 10 am to intensity 8.75 Model Cement type plume with string Inflammatory and Mercury additives. Since then we've had more plumes of the same type. The most recent was about 1 pm (roughly - I didn't mark the time). The plume is still dissipating and is at intensity 8 as I type this (1:47 pm)
Don't be fooled. The sky is clear blue with no visible trails. They are now spraying very short trails at mid-to-high altitude to keep it from being easily seen by the public.
3:02 pm - We were hit with a TYPE II (flu-symptom inducing) biologic type plume roughly an hour ago. Intensity is currently 8.5.
8:04 pm - We had our typical "break" where the air dropped down to intensity 7.25 for the past couple hours. The time of this break varies from night to night.
About 10 minutes ago we were hit with a plume of type Model Cement with strong Inflammatory and Mercury additives. This also is typical after the "break" until the last plume of the day.
10:24 pm - We are just now getting hit with a plume of type Blunt Metallic with the Inflammatory and Mercury additives. The previous plume peaked at 8.5 and took a long time to dissipate.
12:07 am - We were just hit with a plume of type Blunt Metallic with the Inflammatory and Mercury additives.
January 14
Overnight: The last plume of yesterday did not dissipate until after 2 am. The remainder of the night was heavier than usual with air intensity about 7.75 throughout the night.
10:52 am - At 9:27 am we were hit with a Model Cement type plume with the Inflammatory and Mercury additives. Intensity peaked at 8.25. We are now "between the plumes" anticipating the next one at a 2-hour interval, plus-or-minus. That puts it at about 11:30 am. We'll see what happens.
11:28 am - We were hit at 11:12 am. The plume was mostly off our location before fully reaching the ground, so we only caught the edge. Again, it was a Model Cement type.
12:01 pm - ...Continued: Often when this happens, there will be another "layered" plume release that will hit us in a short time. I know many of you have seen the jets flying in a loose formation where 1 jet is a few thousand feet behind and off to the side of another. When you see this happen, and I have seen it countless times, you can see how they are literally blanketing an entire area with fallout, sort of like making a quilt in the sky so the fallout uniformly covers the largest area.
It is now 12:04 and we have been hit a few minutes ago with another plume of type Model Cement with the Inflammatory and Mercury additives. This plume has not missed us and just hit intensity 8.5. This is likely a layered release.
3:52 pm - I have been in Bangor for the early afternoon. Air was a pretty steady 7.75 from Brewer to Bangor and back all day. Just got home a few minutes ago and, as usual, the air within a few minutes of the house was much higher coming in at 8.75 and now 9.25 in the past few minutes. This is again the Model Cement type with the Inflammatory and Mercury additives. The Inflammatory additive is the dominant part of this plume. It's extremely strong.
Just imagine what this kind of inflammatory chemical would do to those who are older and already prone to inflammation. Once again folks, this is the large crime against humanity in human history, and unlike the newer epic crime against humanity, this one has been going on for decades and has likely induced an order of magnitude more morbidity and mortality.
5:19 pm - The air has never recovered from the previous plume. This is likely because of layered releases. Air intensity is now 8.25 with a mix of the Model Cement and Barium types with the Inflammatory and Mercury additives.
We are all being sprayed like insects and they are doing it right in front of you face.
6 pm - We were hit about 15 minutes ago with another Model Cement type with the Inflammatory and Mercury additives. Intensity has already peaked at 8.75.
9:10 pm - We were just hit with a plume of type Model Cement with very strong Inflammatory and Mercury additives. It hit us about 5 minutes ago and intensity is now up to 8.25 and rising.
We the pattern followed tonight. We had a short "break" with milder air, then hit with very hard Inflammatory plumes. If you have followed this log, you will remember that this is a very common pattern.
10:17 pm - We were hit with a plume of type Model Cement with the Inflammatory and Mercury additives just a few minutes ago. Intensity is already at 8.5.
We were hit again and the last plume did not dissipate until after 1 am.
January 13
Overnight: After the second horrid nighttime plume last night, the remainder of the night was "normal poison" - just the background toxins that the Mystery School globalists want you and I to breath. Ambient intensity was 7.5 throughout the night.
11:52 - Our first plume of the day was at 10:01 am. It was a fast-rising, short-lived Blunt-Metallic/Mercury/Inflammatory type plume that quickly rose to 8.75 then fell back to ambient levels within 30 minutes.
Globalists create disasters and blame freedom and nationalism, then offer globalism as the only solution. They do all this for the purpose of securing complete and absolute global power with the support of the public.
1 pm - We were hit with a plume of type Model Cement with the Inflammatory and Mercury additives at about 12:15 pm. Intensity is now 8 and seems to have peaked at this intensity.
1:19 pm - We were just hit with another plume of type Model Cement with the Inflammatory and Mercury additives. This just happened about 2 minutes ago and the intensity has already shot up to 9 and still rising. Obviously, this is a very fast-rising plume released at low-altitude.
4:52 pm - We were hit with a Barium type plume a couple hours ago. Intensity peaked about 8.
Just a few minutes ago we were hit with the Blunt-Metallic/Inflammatory/Mercury additives. Intensity is increasing and is now 8.
6:03 - We were just hit with a plume of type Blunt-Metallic w/Inflammatory/Mercury additives. Intensity is increasing quickly and is now at 8.5+.
6:49 pm - We were just hit with a plume of type Model Cement with the Inflammatory and Mercury additives.
The attack on all life continues.
12:14 am - We were hit with a couple more plumes tonight. I didn't mark the time of the first. We were just now hit again. Type is the Model Cement type with the Inflammatory and Mercury additives. Intensity is increasing quickly and is already at 8.
12:28 am - The previous plume intensity is now up to 10 (maximum severity). The Inflammatory additive is extremely powerful. If you have been keeping up with the log, you will know that they typically hit us with very a strong Inflammatory additive between 5 pm and midnight, so this is a later-than-usual hit. What a nightmare when your government feels entitled to release known toxins on the population day-after-day.
The last plume of the day hit us at about 1 am and did not dissipate until after 2 am.
January 12
Overnight: An intense and bizarre night. Since yesterday evening (see previous log entry), the air remained at 8.5 for the entire night. There were no discrete plumes, just intensely toxic air. I believe this type was the Blunt-Metallic w/Mercury additive primarily, but with a smaller amount of the Model Cement type. The air did not change until 6 am this morning when it finally dissipated within about 30 minutes.
I urinated numerous times during the night, and this is significant because mercury exposure increases the frequency of nighttime urination. I went in to detail on this in a recent post. I also had horrible tinnitus this morning. My ears were "screaming" (tinnitus). Why? Because this also is a symptom of mercury exposure.
The dramatic pattern change continues in this: There have been no discrete plumes today so far. It is now 2:15 pm and the air has been 7.5- since 6:30 am this morning. This is definitely a very strange and dramatic pattern change.
I also much mention that the biologics for the past 2 days have been horrific. So now I'm not surprised that in the past 24 hours I know people who have come down with horrible flu-like symptoms.
What will it take people? What will it take?
I call for concerted legal and social pressure to end this attack on all life. This issue should be in the top 3 subjects that are talked about and reported on today, period. The decimation that is being caused is unprecedented. Please get involved.
10:27 pm - What a day... Nothing like any previous recent day.
So... Until later this afternoon, there was no change in the air here. There were no discrete plumes, just the constant ambient mix that continued since this morning.
At about 5 pm, we experienced a slight increased in ambient intensity. The change occurred in just a few minutes but only increased ambient intensity by 0.25. At about 6 pm we experienced another ambient intensity increase of the same amount. Within an hour intensity was back to about 7.5.
It is now 10:38 pm. At about 10 pm we were hit with a horrible Blunt-Metallic/Mercury additive plume, then at about 10:20 we were hit with another. This brought the air intensity up to the current level of 9. This is the same type that was present in the air last night for the entire night until 6 am this morning (see previous details in this log).
I now sit here with a wet mask on to enable me to bear through this intentional poisoning of our land and our bodies. All the same symptoms that I had last night that were caused by this plume type are now returning.
Those doing this to us do not have the right do commit such destructive crimes against humanity. They only do it because the public allows them to get away with it.
Intensity is still slowly rising and is now approaching 9.25 as I type this. There will be many suffering tonight if this continues. This plume also contains the Inflammatory additive which is extremely strong.
Please get involved with a local group to help raise the public's awareness about this historic, destructive crime against humanity.
11:53 pm - They just hit us with a Model Cement plume with incredibly-strong inflammatory and Mercury additives. We were hit about 5 minutes ago and intensity is already 9.75.
There are absolutely no words to describe the wickedness of what they are doing to us, and the scale is enormous.
You are living in historic times.
12:38 am - The air had completely of the previous plume and returned to ambient levels of 7.5-. We are just now being hit with another plume of the same time. The Inflammatory additive is so incredibly concentrated. I notice that the most common reaction people have to this plume type is that they get tired, very tired. Intensity is, as I type this, back up to 8.5 and rising.
January 11
Overnight: Well here we go. Biologics, strong biologics through the night. These were Type II that induce flu-like symptoms. Very strong. No doubt that some will get sick. I was not awake during the first biologic plume(s), but I know it happened because of certain, very specific artifacts it induces. It must have been strong because the artifacts are strong. Interesting that they are using biologics are 3 days of intense spraying.
Keep in mind that the spraying has to be done in such a way that there is plausible deniability. So they won't likely spray every area with biologics at the same time. They need to make the "outbreak" look like it was natural, so they must distribute biologics in such a way that it will look like a natural event. Never underestimate these monsters. When it come to manipulating and deceiving people, that are masterful. They are not stupid in this respect (notice the qualifier).
One more thing to notice, and this is another pattern that I have seen for years. They often spray biologics at times where the induced "breakout" can be blamed on either rain or cold weather. Last night in our area we had the coldest day and night of the year, so it's absolutely no surprise that they are spraying biologics now. Folks, this is one of the many ways they deceive you and the public in general.
It is now 9:42 am and we have a Biologic plume in the air at intensity 8.25. It's lingering so appears to be a mid-to-high altitude release.
I hope to God you are listening, for your own sake. Make sure you have heaters and electrostatic air purifiers that damage bacterial life and viral binding capability. These should be run in bedrooms overnight when someone is sick to mitigate airborne biologics. A wet mask has also been very effective for me against biologics and most chemtrails types. I hope this helps you and your family.
4:18 am - This has shaped up to be another nightmarish day.
I had to go to Bangor today, and while driving in, at 11:44 am, we drove into a Biologic plume that peaked at 9.75 at about 12:10 am, but 5 minutes later, at 12:17 am, while in Brewer (right next to Bangor), we were hit with plume of type Model Cement. About 15 minutes later, at 12:32 pm, we were hit with another Model Cement type plume. This toxic cocktail soon peaked at intensity 9.5.
At about 3:15 pm, we were hit with yet another Model Cement plume in Bangor.
I finally arrived back home at about 4 pm, and within 5 minutes of arriving, we were hit with yet another Model Cement type plume which, as I type this (4:23 pm) is at intensity 9.75. This plume also contains the Inflammatory and Mercury additives.
If you read back in this log, you will find that they have recently been spraying the extremely-strong Blunt-Metallic/Inflammatory plume earlier than usual, and this day appears to be no exception.
I currently sit here with my wet mask on which has already been saturated with the Model Cement odor and smells so intensely that it is no different than if I was smelling a bottle of nail polish remover (toluene) 1/2 inch below my nose. Yes, folks, it's that intense. I won't even go into the array of health symptoms that this invokes. I have been over the numerous times and have posted many links to the list.
This world has cancer in the highest positions of virtually all countries globally, but fortunately, the world is waking up. Unfortunately, the globalists are about to play their entire hand including the war card, the roundup card, and the pandemic-time-five card at the same time. How much longer people? How much longer until you commit yourself to be brave and speak out and motivate others to get involved in ending corruption. We are not anti-government. We are anti-corruption.
8:12 pm - Since the previous post, the intensity has not dropped below 7.5 and has spent most of the time between 8 and 8.5. It even spent some time at 8.75. Needless to say, it's been another horrible day of spraying. The type this entire afternoon has been the Model Cement type.
Try to image what would happen if someone you loved spent 24 hours per day with a bottle of toluene strapped below their nose. What type of health effects do you think they would eventually begin to have.
Why don't most smell it? Clearly the odor-causing component has been largely stripped out of the chemical structure, however, enough of it remains that, if you wear a wet mask with a chelator (I use peppermint oil), anyone can smell the accumulated Model Cement glue type fallout on the mask after a short while. For me, it is unbearable and we both know we have health effects from it because our symptoms always occur in sync with the odor in the air.
I wish everyone - at least someone - would try using a wet mask with peppermint oil and see what I'm talking about. You will be astounded when you discover what you have been breathing and how much it smells like highly-toxic toluene.
10:53 pm - The air is still bad. Intensity has been above 8 all evening. Right now it's 8.5+. We have been having symptoms from this poisoning all day. It's just unbelievable that they are getting away with doing this to us, but again, it's up to the people to wake up and get involved.
January 10
Overnight: Harder-than-usual night. Intensity: 7.75 most of the night. Type: Model Cement with Inflammatory and Mercury additives.
10:27 am - We were hit with a very slow-rising Barium type plume at about 6:30 am. We had another at about 8:30 pm. Intensity peaked at 8.25.
For the past few months, we have been getting sprayed with the Morgellon's additive in the early mornings. I have forgotten to mention this for quite a while (or kept putting it off because it would require a longer explanation) and finally realized that I'd better get to it today mainly because today's hit was particularly strong.
The Morgellon's additive peaked at intensity 8.5 at about 9 am this morning. Both the 6:30 am and the 8:30 am hit this morning contained the Morgellon's additive. This has been the pattern on many days-of-the-week for months now.
This additive causes a unique set of symptoms shown in the link below.
10:49 pm - So, what a day this has been. Had to go to Freeport (near Portland) today. Air was about 7.5 for most of the trip down. Type was Model Cement as usual.
The ride back was a completely different story.
Just after 5 pm, I first detected fast-rising Model Cement plume while leaving Freeport. The plume had risen to 9.5 within minutes and persisted between 9 and 9.5 up the interstate all the way to Augusta. The Inflammatory and Mercury additives were unbearable.
In Augusta, the intensity fell a bit to 8.5. But the time we got to Waterville, intensity has dropped back to about 8.
When we reached Dixmont, we hit another fast-rising plume that quickly rose to 9.5. This intensity persisted for the next hour, and even popped above 9.5 to 9.75 for a while. Again, the Inflammatory and Mercury additives were extremely intense.
Did you know mercury causes asthma? Did you know that, although smoking is at an all-time low that childhood asthma is at an all time high? Now that artificial atmospheric mercury is at an all-time high because of chemtrails, can you see the correlation?
After arriving home, intensity was back to about 8.5 and stayed there for a little while.
At about 8:30 we were hit with the edge of a fast-rising and fast-declining plume of the same type: Model Cement with the Inflammatory and Mercury additives.
At 9:33 we were hit with the edge of another fast-rising and fast-declining plume of the same type: Model Cement with the Inflammatory and Mercury additives. It never fully declined in intensity and, as I type this (11 pm) the intensity of the Model Cement and Inflammatory and Mercury additives remains at 8.
For their protection I won't get specific, but I have 2 family members that both spontaneously vomited today. Coincidence?
How much longer until people are willing to be brave and end these epic crimes against you, me, and all living things.
11:15 pm - We are just now getting hit with yet another plume of type Model Cement with the Inflammatory and Mercury additives. The Inflammatory additive is very strong and it's only been about 5 minutes from first detection. Intensity is already at 8.5 and rising.
11:30 pm - The previous plume is now at intensity 9.5 and still rising.
12:46 am - We are just now hit with yet another Model Cement plume with very strong Inflammatory and Mercury additives. We were hit less then 5 minutes ago but intensity is already 8.5 and rising quickly. Clearly these are low altitude releases. May God help us.
January 9
Overnight: Typical night. Intensity: 7.5. Type: Model Cement with Inflammatory and Mercury additives. The Final discrete plume dissipated at about 12:30 am this morning. The remainder of the night had ambient levels of about 7.5.
9:36 am - First discrete plume of the day. Intensity is slowly rising and is now at 7.75. Type is Model Cement with the Inflammatory and Mercury additives.
11:16 am - At about 10:50 am we were hit with a Model Cement type plume and a Sharp Metallic type plume with the Inflammatory and Mercury additives. Intensity has been rising slowly and is now at 8.5. The attack on all life continues.
Are you afraid to spread the truth because you think you may be targeted? Please Keep this in mind:
You are already targeted.
12:42 pm - Just hit with another plume of type Model Cement with the Inflammatory and Mercury additives. This plum intensity is rising fast and is already at 8 as I type this. I am very sick and tired of being sprayed like an insect. This is a historic crime against humanity.
12:51 pm - The previous plume intensity is now at 9 and still rising. This is so horrible.
2:11 pm - We were just hit with a plume of type Barium with the Inflammatory and Mercury additives. Intensity is fast rising and is 8 at the moment.
3:38 pm - We were just hit with a plume of type Model Cement with the Inflammatory and Mercury additives. Intensity is 7.75 and rising fairly quickly.
3:56 pm - The previous plume is now at 9.25 intensity and still rising. Do you see how bad it has been lately compared with previous weeks/months?
6:03 pm - We were just hit with a plume of type Barium with the Inflammatory and Mercury additives. Intensity is 8 and rising at a medium rate.
7:54 pm - We were just hit with a plume of type Model Cement with the Inflammatory and Mercury additives. Intensity is 8 and rising at a fast rate.
9:57 pm - We have been in the evening "break" for about 30 minutes. If you have been reading this log, you will have learned that, at least in this area, we have a 30 to 60 minute zone of mild air most nights. This "break" occurs usually between 6 pm and 11 pm, but sometimes falls outside these bounds.
During this break we both feel somewhat like we used to before chemtrails began. The pressure, inflammation, aches and pains, fatigue, and other issues decrease 75% or more. It's amazing, and it's a reminder of what life would be like without devils running our world. I so look forward to the day when this all ends and we can live without pain, pressure, and the heightened emotions and stress that mercury causes. Oh, how much longer?
10:30 pm - It didn't last long, as usual. The break ended about 10:15 pm. We are now breathing a strong plume of type Barium with the Inflammatory and Mercury additives. Intensity is now 8.5 and rising at a medium rate. How much longer?
January 8
What a nightmare today has been so far.
Don't be deceived by clear blue skies. The sky here is blue with no visible trails, yet the air, as I type this is at intensity level 10.
First things first.
At 5:30 this morning the air has the typical, overnight levels of Model Cement type chemtrail fallout at intensity 7.5.
By about 6 am, we had a Phosgene type plume. If you read this log, you will see that this type only appears occasionally, perhaps a few times per year.
By 6:30 am, we were under a full blown Model Cement type plume at intensity 8.25.
By 7:30, the previous plume never dissipated indicating a layered release. Intensity was 8.5. The HAARP Hum was extremely loud, as loud as I have ever heard it before.
By 8:30, air intensity still had not decreased and the Model Cement odor in the air was at 9.5 intensity.
This continued to increase to the point we are now (11:32 am). Air intensity for the past hour has been 10 with the type being the Model Cement type.
Of course, we have all the usual symptoms associated with both the Phosgene type and the Model Cement type at these intensities.
Needless to say, it's been an epic-bad morning, worse than I've experienced for many months.
2:36 pm - By noon, the air was back to "normal" intensity levels of 7.5.
It's now 2:37 pm and we were just hit with another very strong Model Cement plume. Intensity is rising quickly so this is likely a low-altitude release that will also dissipate quickly. Intensity is already 8.25. Note that it only took about 2 minutes from first detection to reach this level.
There are still NO plumes visible in the sky. It pains me when people assume that spraying is not taking place just because they don't see visible plumes. The intensity of chemtrail poison in the air has no direct relation with visible plumes in the sky.
Several years ago, they began implementing technology that made plumes dissipate quickly and therefore produces no persistent plumes. Many uninformed activists labeled these "contrails" according to the current propaganda of the time, but they were not contrails. They were new-technology non-persistent chemtrails. The non-persistence of new chemtrails along with the fact that they often release them at very high altitudes makes them very difficult to see. So although they take longer the reach the ground, they still do reach the ground and are just as toxic and intense as they have ever been.
Please don't be deceived.
Also, don't buy the lie that contrails are common. They are not and have never been. I have seen fabricated news videos claiming that the skies were covered with contrails in the 1970's. This is a lie. I was there and I was a skywatcher all my childhood and life and I can tell you, there was no such thing. It is a complete fabrication to make jet trails seem more harmless to the public.
Some misinformed activists have done great harm to our movement by buying in to the EPA propaganda that contrails are unintentional side effect of fuel additives. This is a nonsensical belief being promoted by some who have not searched deeply enough to understand the true nature of this historic issue.
4:57 pm - Hit 10 mins ago with a fast-rising Model Cement plume. Intensity is already at 8.5 and still rising.
5:43 pm - Just hit 5 mins ago with a very strong plume of type Model Cement, but with very strong Inflammatory and Mercury additives, just like we get nearly every night. Usually these hits with the strong Inflammatory additive happen a little later, but tonight it's earlier than usual. Intensity of the Inflammatory component is currently at 9 and rising. This attack against all life must stop.
8:05 pm - Just getting hit with another plume of type Model Cement. Intensity is rising quickly.
9:44 pm - We had the usual evening break from about 9 until 9:40 pm. Now, we were just hit with a Model Cement type plume. Intensity is rising quickly and is currently at 8.5. The Inflammatory and Mercury additives are the strongest components, as is usually the case in the evening. Ever wonder why most heart attacks happen during this time? Mainstream media blames stress, but I know how horribly inflammatory these plumes are.
11:48 pm - We were hit 10 minutes ago with a Model Cement type plume with extremely an strong Inflammatory additive. Intensity is rising quickly and is currently at 9.5. You will not be fighting for your kid's freedom. You will be fighting for your own.
January 7
Overnight: Ambient air intensity was about 7.5 until later in the morning (7 am) when it increased to 7.75. Type was the typical Model Cement with the Inflammatory and Mercury additives. All measurements at night are based on the many times I wake up.
9:49 am - This is the first plume of the day. It's snowing outside and we are being hit with a Model Cement plume. Intensity is rising as a medium rate indicating a medium altitude release. Intensity is now 8.
12:31 pm - Air intensity has stayed between about 8 and 8.5 since the last entry. Type is Model Cement with the Inflammatory and Mercury additives.
The historic attack against all life continues.
2:11 pm - Just hit with a plume of type Model Cement with the Inflammatory and Mercury additives at about 2 pm. This is currently at intensity 8 and still rising.
2:40 pm - The previous plume is now at intensity 9.25 (very intense) and still rising. Based on its rise rate, this may have been a layered plume.
6:15 pm - Perhaps an hour ago we got hit with a plume of type Barium with the typical Inflammatory and Mercury additives. It is still in the air with an intensity of 8.
9:34 pm - We had another plume at about 7:30. At about 9 pm, we had the usual break that often have in the evenings. Usually it's a little earlier. Air intensity got down to about 6.75 for about 30 minutes. It felt fantastic. My inflammation largely went away along with all of my pain. My energy returned, my headache went away and I felt calm and peaceful. Chemtrail plumes cause all the opposite symptoms, and much more.
At about 9:30 we got hit with a fast-rising plume of type Model Cement. It's now 9:43 pm and it's already dissipating. Clearly we only caught the edge of it as it descended.
Chemtrails have ruined my life. The suffering that it has caused us has been fundamentally life changing; life ruining to be more exact. First is was vaccines, then it was amalgam fillings, then it was chemtrails, all of which ruined my life, all of which contain mercury.
Please take time to watch and share this incredible video that will provide just a glimpse of what is being done to all of us.
January 6
Overnight: The ambient air contained the Model Cement type with the Inflammatory and Mercury additives. Intensity throughout the night ranged from 7.25 to 7.5.
10:54 am - At about 10:10 am we were hit with the first plume of the day. Type was Model Cement with the Inflammatory and Mercury additives. The additives are lower in intensity but the type itself is currently (10:55 am) at 8.5.
10:28 pm - Been very busy today so I didn't have time to log, but here is an overview. We had plumes approximately every 2 hours. With only a couple exceptions, the were all of type Model Cement with the Inflammatory and Mercury additives. All plumes have been fairly intense. Their rise and fall times were typical indicating medium altitude releases.
The most recent plume began at about 10 am. It was also the Model Cement type and had the Inflammatory and Mercury additives were quite strong. We'll see what happens from here. So much I want to say about this, but words are not enough.
12:12 am - We're getting hit with another plume as I type this. Type is Model Cement with the Inflammatory and Mercury additives. Intensity is increasing rapidly so it will probably decrease rapidly as well. This indicates a low-altitude release. The Inflammatory additive is the strongest component of this plume at the moment, and this is usually the case on plumes released between 7 pm and midnight, not always, but usually.
January 5
Overnight: Type throughout the night was the Model Cement type and the Barium type with Inflammatory and Mercury additives with intensity ranging form 7.25 to 7.5.
10:25 am - Just hit with a slowly-increasing plume of type Model Cement with the Inflammatory and Mercury additives. This is likely a high-altitude release because of the fact that the intensity is increasing slowly.
8:43 pm - Awful day of spraying. We had a few Model Cement plumes, but most of the afternoon we have had Barium in the air with the Inflammatory and Mercury additives. Intensity has been between 7,75 and 8.75 with virtually no breaks between plumes. In short, it has been intense.
The mass poisoning of the world continues as much of the population goes quietly into the night.
10:40 pm - We were hit about 10 minutes ago with a Sharp Metallic type. If you remember, we were hit with one of these a week or two ago, but before that, it was a long, long time since they used this type here. Intensity is 8.5 and rising. The Inflammatory and Mercury types are also present.
Did you see that they are intentionally killing our supply chains?
11:19 pm - Shortly after my last entry, we were hit with another plume of type Model Cement. This happened while the previous plume was peaking in intensity. Right now, total intensity is 8.5 with both types in the air, but the Model Cement type is stronger at the moment. The Inflammatory and Mercury additives are also present. My veins are sticking out of my arms as always happens when the Inflammatory additive is present and at 8 or above.
11:52 pm - The previous plume has become strong and stronger, especially the Inflammatory additive. Intensity of the Inflammatory additive is currently at 9.5 (very severe). Our arteries are budging out of our hands/arms and feel like they are going to pop. What a bizarre and nightmarish time we live in.
I also forgot to mention that we had biologics in the air from roughly 8 pm until about 10:30 pm.
January 4
Overnight: Typical night of ambient non-discreet chemtrails in the air. Type was the Model Cement type with Inflammatory and Mercury additives with intensity ranging form 7.5 to 7.75. The mercury component was particularly strong, which has become the norm for months now.
On another note, the HAARP Hum was very loud throughout the night and continues as I type this (9:48 am). It is as loud as I've ever heard it at the moment. Remember that exposure to strong EMF causes all types of damage to the body including damage to the blood brain barrier and cell walls. EMF exposure makes toxins in the air more toxic by breaking down the mechanism that cells use to keep toxins out.
3:20 pm - We've had a Barium type plume with the Inflammatory and Mercury additives on us all afternoon. Intensity has been between 7.75 and 8.25.
Just now (3:21 pm) we are getting hit with a plume of type Model Cement with the same Inflammatory and Mercury additives. Intensity is rising at a medium rate and is now 7.75.
4:41 pm - Just hit with a plume of type Barium with the Inflammatory and Mercury additives. Intensity is rising quickly and is currently at 8.25. The Barium type nearly always precedes precipitation, and we have rain coming tonight and tomorrow, so this plume type is completely expected.
6:26 pm - Just hit with another plume of type Barium with the Inflammatory and Mercury additives. Intensity is rising quickly and is currently at 8.25.
7:13 pm - Just hit with another plume of type Barium with the Inflammatory and Mercury additives. The previous one dissipated quickly.
9:04 pm - Just hit with a plume of type Model Cement with the Inflammatory and Mercury additives. I'm so very tired of being sprayed. I wish this would end.
10:08 pm - Just hit with a plume of type Barium with the Inflammatory and Mercury additives. I know this sounds like a broken record (anybody remember what a record is?), but this is how we get hit over and over throughout the day. And this is also how YOU are being sprayed day-after-day, whether you taste it in the air or not, it is affecting you, increasing the speed of aging, destroying kidneys, eyes, nerves, and doing much damage.
Want to know what type of damage is being done? Check out what mercury does to your body (and yes, chemtrails contain mercury):
Overnight: Bad night of spraying. Intensity ranged between 7.5 and 8.5. I woke up several time to the taste of chemtrails in the air. Mercury content was high as I had mercury symptoms throughout the night and in the morning. I have expounded on this in previous posts.
10:47 am - We have had several plumes this morning so far. The current plume hit us about 10:30 am. Type is the Model Cement with Inflammatory and Mercury additives. Intensity is 8.5.
As you can see, the Model Cement is the most commonly sprayed type these days. It's interesting that - over the past month - they have used a variety of old types that we have not seen in a while, such as the Drywall Dust type, the Phosgene (freshly-cut grass) type, and the Sharp Metallic type. Holidays are always sprayed harder and this new year's eve and day were no exception. The unusually-hard spraying continues today.
6:12 pm - We've had strong Model Cement type plumes all afternoon. In the later afternoon we had 1 plume of type Barium, which is often sprayed before rain, which is headed our way.
It's now 6:13 pm and we are being hit with a Model Cement type plume with the Inflammatory and Mercury additives. Intensity is rising at a medium rate. This time of night is when the Inflammatory and Mercury additives are much stronger than the rest of the day and this is no exception.
Between about 8 pm and now (11 pm) we have had 2 extremely strong plumes. Type was Model Cement, but the inflammatory additive was much strong peaking at 9.75 in both plumes.
January 2
Overnight: Bad night of spraying. Intensity ranged between 7.75 and 8.5.
I woke up at about 6:30 am to a bad plume of type Model Cement with the Inflammatory and Mercury additives. Intensity was about 8.75.
I woke up again at about 8:30 am to another bad plume of type Model Cement combined with the Drywall Dust type with the Inflammatory and Mercury additives. Intensity was about 8.75 again. The intensity of the Mercury additive was especially strong.
Just before 10 am we were hit with another plume of the same type as the previous one: Model Cement and Drywall Dust with the Inflammatory and Mercury additives. It's now 11:10 am and the intensity has decreased to 8 but still contains the Mercury type stronger than the other components.
To learn more about what mercury does to you, here are are couple sources that I hope you share:
I didn't have time to log the rest of the day, but overall, we had plumes every 120 minutes or less. Most plumes were of the Model Cement type and ranged in intensity from 8 to 9, so it was a pretty intense day of poisoning, and I say this wholeheartedly, we are being poisoned, and this is most certainly intentional.
Plume hit us into the night and even past midnight; a horrible day, once again.
January 1
Overnight: Stronger-than-normal night of spraying with intensity ranging between 7.5 and 7.75.
Early Morning Plumes: We had 2 very strong plumes this morning. One at about 7:10 am and the other at about 9:30 am. Both were of type Model Cement with strong Inflammatory and Mercury additives. Intensity peaked at 9.5 and 9 respectively. What a way to start the new year. Folks, this is going to continue until you hold them lawfully accountable.
11:20 am - I just detected a new plume of type Drywall Dust with the Inflammatory and Mercury additives. Intensity is rising slowly and is currently at 7.75.
11:42 am - The previous plume has become much worse and now has the Model Cement type mixed in at a lower intensity.
The intensity of the Drywall Dust type is 9 The intensity of the Model Cement type is 8.25
We both currently have symptoms including headache, nausea, stomach pain, and more, and these symptoms are a direct result of the poison we are being sprayed with. This mass poisoning is the largest crime against humanity ever committed and has likely ended more lives and caused more disease than any other single source to date.
2:04 pm - Hit with a plume of type Model Cement with the Inflammatory and Mercury additives. Intensity is fast-rising and already at 8.25.
3:30 pm - Hit with another plume of type Model Cement with the Inflammatory and Mercury additives. Intensity is fast-rising and already at 8.75 and rising. The Inflammatory additive is especially strong.
4:39 pm - Hit with a plume of type Sharp Metallic and Model Cement with the Inflammatory and Mercury additives. Intensity is fast-rising and already at 8.25 and rising.
6:57 pm - We were hit with a plume of type Model Cement with the Inflammatory and Mercury additives about 12 minutes ago. Intensity is not as high as the other plumes today only hitting 8 so far. Nevertheless, it's been a horrible 3 days of spraying.
7:06 pm - Just detected a Drywall Dust type with strong Mercury additive. Intensity is rising. I am beginning to have mercury symptoms, but this is typical for the Drywall Dust type. It is nearly always accompanied with strong Mercury additive.
8:50 pm - Just being hit now with a plume of type Model Cement with the Inflammatory and Mercury additives. Intensity is rising fast indicating a low-altitude release. Again, this has been a very bad day of spraying, but the 2-hour general pattern is clearly apparent when you check spray times.
9:52 pm - Just hit a few minutes ago with a plume of type Blunt Metallic. Intensity is 8.25 and rising fast. The Blunt Metallic type is similar but distinct from the Sharp Metallic type and has a slightly different symptom set.
Looking over the variety of different chemtrail types gives you an idea of just how many poisons we are being intentionally exposed to.
